Loading...
 

N1MM Logger+ Update History, Release Notes


N1MM Logger+ Update 1.0.6059.exe
Fixed bug with AppInfo UDP packets being sent on ContactInfo port number (W3SZ) (coded by K8UT)
Digital RX Windows: DI2's attached RX windows was not properly word wrapping at the end of the textbox.. Corrected. (Coded by N2AMG) 3.85 MB 08 Feb 2017

N1MM Logger+ Update 1.0.6055.exe
Fixed minor bug in Antennas table handling. (Coded by N2IC)
Rover Location Bug: Fixed a bug introduced in the January 17 program version. (K8MR) (Coded by K3CT)
FL QSO: Change to Cabrillo 3.0. (K1TO) (Coded by K3CT)
QSO Party: IN abbreviations changed to five characters. This caused changes to the following QSO parties: 7QP, NEWE, IN, IN7QPNE. Please test all of these QSO Parties with the correct station location and report any issues. Removed INQP bonus station callsign. Not included in the rules. Note: No changes have made to DE QP. No rules 2017 posted, no prior rules available on the website, and no indication of the 2017 date. (KJ9C) (Coded by K3CT)
Startup: fixed runtime error when radio is out of band (Coded by N1MM) 3.85 MB 31 Jan 2017

N1MM Logger+ Update 1.0.6044.exe
UDC: /BonusPoints/ = IsComment, +10 was adding 10 points regrdless of Comment field. (G4OGB) (coded by NA3M)
NA Sprint CW and NA Sprint RTTY: Added new multipliers and allowed Hawaiian stations to count as "North America". (coded by N2IC)
Winkey: Fixed {LOGTHENPOP} behavior. (K9SE) (Coded by N2IC)
Entry Window: Removed the unused command used to set the CPU proxy. Not used in Logger+. (Coded by K3CT)
Rover Location: Changed the RoverQTH command user messages for grid square contests. Note: Users can also set the Rover Grid by right click on the Grid Square Map and select set your Rover grid. (W3SZ) (Coded by K3CT)
Available Window: Load the users selection of Follow Spot option during program initialize. Needed because the Multiplier windows use this option. (Coded by K3CT)
UDP Broadcast: Added SO2R IsStereo field to the UDP RadioInfo packet. (coded by K8UT)
Improvements to SO2R 2 keyboard operation. (Coded by N2IC)
Change to ESM flow. In run mode, if a call is entered and exchange sent, but the received exchange has not been entered, and the call is corrected, the default behavior is that call + exchange will be sent when Enter key is pressed. (Coded by N2IC)
VA QSO Party: Rules change, remove callsign bonus points. (AJ4LN) (Coded by K3CT) 3.85 MB 17 Jan 2017

N1MM Logger+ Update 1.0.6033.exe
Log selection: allow enter to trigger the ok button functionality. (GM3WUX) (Coded by N1MM)
Log selection: make tab move to Opertator class control when pressed in contest selection grid. Move to Cancel button if shift-tab is pressed. (GM3WUX) (Coded by N1MM)
Radio Control: Added support for the FT-891. See the Logger+ Manual, Supported Radios, FT-891 for the COM port settings and known radio limitations. Tnx to VE3VSM for radio testing. (VE3VSM)(Coded by K3CT)
UDC: if BonusPoints2 = (+)1, Grids.txt is used bonus points are automatically added in all Qs except the last one (manual Rescore is required for that one). (G4OGB) (coded by NA3M)
UBA Sections Table: Add ARA, PHI. Remove SBS, TOR, TRK, and ZZZ. Apply to all UBA contests. (ON7HLU) (Coded by K3CT)
ARRL RTTY Roundup: Changed exchange field to overstrike. (Coded by N2IC) 3.85 MB 10 Jan 2017

N1MM Logger+ Update 1.0.6024.exe
Cut Number Exchange: When receiving cut number serial numbers, convert V to 4 and B to 6. (W6NF) (Coded by K3CT)
Affiliated Societies Contest: Change to one point per QSO, no limit on who you can work. (G4OGB) (Coded by K3CT)
Fix runtime error when copying contests to a new database (K0RC) (Coded by N1MM)
Updated copyright (Coded by N1MM) 3.85 MB 03 Jan 2017

N1MM Logger+ Update 1.0.6016.exe
Winkey - Fixed truncated His Call where His Call key has a leading space. (Coded by N2IC) 3.85 MB 27 Dec 2016

N1MM Logger+ Update 1.0.6014.exe
NAQP - Added DC multiplier. (Coded by N2IC)
Download latest call history file for a contest. Must be on N1MM hamdocs server with file name as .txt. Does not support QSOParties. (N1MM)
Fixed long-standing Winkey "repeat chunk of message" problem when ! (his call) is not the first character in a macro. (Coded by N2IC)
DigitalSetup: Soundcard Detection routine was not functioning corrrectly when system had no soundcards installed. (Coded by N2AMG)
Changed multi-2 lockout. Will lockout when 2 stations try to transmit on same band/mode, or when more than 2 stations try to transmit on any band. (LY7T, 9A3OS) (Coded by N2IC) 3.86 MB 20 Dec 2016

N1MM Logger+ Update 1.0.6006.exe
Removed MorseRunner-N1MMPlus.ahk as MorseRunner supports now communication via UDP (N2IC) (Coded by KU7T)
Add configuration of packet cluster keep-alive timer. Default is 3 minutes. Change this to a lower value if you get frequent "forced disconnects". (Coded by N2IC)
SO2R/SO2V: A Shift+Click on a Bandmap spot program the radio and not change focus. (Coded by K3CT)
ARRL10M: Fix the Entry window band button color issue, efficiency improvements. Call history data should be in the Exch1 field. (CX6VM) (N2IC & K3CT)
ARRL160M: Add a database lookup for country and prefix to color incoming spots for VE, PR, VI, and PAC. The Call History data should be stored in the Exch1 field. (Coded by K3CT)
UDC: new format for BonusPoints2 (BonusPoints2 = (+)1, Grids.txt). See _UDC_Help.txt updated with this new version (G4OGB) (Coded by NA3M)
UDC: made BonusPoints2 = +1, Grids.txt work for 4 char GridSquare even if 6 chars were entered in EW (G4OGB) (Coded by NA3M) 3.85 MB 13 Dec 2016

N1MM Logger+ Update 1.0.5995.exe
ARRL 10 Meter Contest - Change Mexican DF district to CMX. Entering CMX, DF or DFE will all count as the CMX district. (Coded by N2IC) 3.85 MB 30 Nov 2016

N1MM Logger+ Update 1.0.5991.exe
QTCWindow: WAERTTY - If QTC already entered do not clear QTC when entering QTC Header. (Coded by N2AMG)
QTCWindow: WAERTTY - When entering QTC with Keyoard Tab and Enter keys were not functioning correctly in the QTC serial window. (Coded by N2AMG)
QTCWindow: WAERTTY - When using Skip in the first QTC you were unable to enter any qtc after that. Fixed (Coded by N2AMG)
QTCWindow: WAERTTY - When pressing Cancel in the QTC Window it no longer wipes the previous qso in the Entry Window if exchange is not filled in. (Coded by N2AMG)
CQWWRTTY: Swap Zone and State Entry windows to be the same order as rules state.
CQWWRTTY: Once state is changed the zone will auto update and be left highlighted incase a change is needed. (Coded by N2AMG) 3.86 MB 29 Nov 2016

N1MM Logger+ Update 1.0.5988.exe
Rotor: Fix repetition of (R) when using bidirectionality (KK1W) (Coded by N1MM)
UDC: Multiplier1(2,3) were missing in txt file if GenericPrintString was used (W3SZ) (coded by NA3M) 3.86 MB 22 Nov 2016


N1MM Logger+ Update 1.0.5982.exe
Changes to multi-2 transmit lockout. When there are more than one Run1 stations or more than one Run2 stations, transmit will be blocked if a Run1 (or Run2)
station is transmitting and another Run1 (or Run2) station tries to transmit. (9A3OS) (Coded by N2IC)
Digital RX Windows: When WAE contest is selected automatically set window type to Scrolling. (Coded by N2AMG)
IC-7850/51: Reported radio control issue, increase in the command pacing time. (N3RD) (Coded by K3CT) 3.86 MB 15 Nov 2016

N1MM Logger+ Update 1.0.5978.exe
'QTC Window: In WEA RTTY when using MMVARI for the digital engine QTC was not being sent correctly. (Coded by N2AMG)
Entry WindowConfig, Contact Edit, Contest Setup: adjusted tab order and provided accessibility info for blind hams. Of note is that the Accessibiilty Name for Received Nr is the Sent Nr nnn at Terry's request. He needed easy access to Sent Nr (GM3WUX) (Coded by N1MM)
Max rates: added names of all ops (note that this is across computers) (Coded by N1MM)
Runs: added names of all ops and repeated by computer name (Coded by N1MM)
Radio Codec: For the K3, IC-7300, IC-7410, IC-7600, IC-7850/51, IC-9100. Key the TX when starting voice message recording with Logger+ Audio. Unkey the radio when the message recording ends. This eliminates the receiver noise in the recorded voice message. (Coded by K3CT)
MultiOp: Added a Foot Switch menu item, "First One Wins". Used with Network Status, Options tab, "Block my Tx only if other station transmitting on same band & mode" = Checked. Used to to prevent two radios from transmitting on the same band when using a radio codec to send a wav file. The transmitting radio pulls the DSR pin low of the other computer(s) on the same band when it transmits. (Coded by K3CT)
Alt+Q: If pressed when at the CQ frequency, the radio will be programmed to the selected Available window spot or latest spot. In SO2R mode do not allow the radio to change bands. (Coded by K3CT)
Alt+A: In SO2R do not allow both radios to be programmed to the same band. If the Available window spot is on the band of the non-focus radio, set the non-focus radio to the spot frequency. Change the focus with the spot if Available window, Focus Follows Spot is enabled. (YO3IRM) (Coded by K3CT)
Call History Import: Correct a bug that prevented the contest name associated with the call history data to be detected if the line ended with several spaces. (Coded by K3CT)
Move Multipliers: In SO2R when right clicking on a spot, do not program the other radio to the same band as the focus radio. (Coded by K3CT)
Entry Window: In SO2R, when pressing Alt+Shift+Q, do not place the other radio on the same band as the focus radio. (Coded by K3CT)
Multiplier Window: In So2R, when clicking on a multiplier, do not program both radios to the same band. (YO3IRM) (Coded by K3CT)
Network Status Window: Change labels on Options tab for clarity. No change in operation. (Coded by N2IC)
When networked computer cannot be time-synced with master, display error only once. (Coded by N2IC)
IC-7300: Split wasn't being cleared when clicking on a non-split spot. (Coded by K3CT) 3.85 MB 08 Nov 2016

N1MM Logger+ Update 1.0.5969.exe
SCCRTTY - Force logged non-numeric exchange would cause runtime error during Cabrillo. Now generates "0000" (S57AW) (Coded by N1MM)
UDC - /QsoErrorString/ param is now working not only for Exchange1Text in EntryWindow but also for CommentText, NameText and MiscText (G4OGB) (Coded by NA3M) 3.85 MB 01 Nov 2016

N1MM Logger+ Update 1.0.5966.exe
Fixed glitches in rotor setup form. (Coded by N2IC and N1MM)
Rotor: Reduce size of buttons. (Coded by N1MM)
SC QSO Party: Change in bonus points. (WN4APF) (Coded by K3CT)
JARTS: Change to Cabrillo 3.0. Users will have to open the contest dialog and set the contest selectors for the recent contest before exporting Cabrillo. (DJ3IW) (Coded by K3CT)
Rotor: Rotor widget positions now follow the operator. (W4AAW) (Coded by N2IC)

  • UDC: 1. New argument (SectIs_xxx, nnn) for UDC parameter /PointsPerContact/;

2. New argument MiscIs_xxx for UDC parameter /BonusPoints/;
3. Problem with BonusPoints = IsMult1(2,3) fixed (G4OGB) (coded by NA3M)
Entry Window tool tips could not be turned off (K2ZR) (Coded by N1MM)
Fixed bug in @ (voice listening frequency) when SO2R and Focus Other is enabled. (Coded by N2IC) 3.85 MB 25 Oct 2016

N1MM Logger+ Update 1.0.5952.exe
Fix runtime error computing quality tag (WH6YH) (Coded by N1MM)
UDC - added new parameter /DupeQSOMinutesAgo/, see _UDC_Help.txt updated with this new version (UT7DK) (Coded by NA3M)
Converted _UDC_Help.txt file to UTF-8 encoding so all language sections of it can be read with Notepad (Coded by NA3M) 3.84 MB 18 Oct 2016

N1MM Logger+ Update 1.0.5943.exe
Fixed MorseRunner F5 operation (N4IQ). (Coded by N2IC)
Added {OTRSPOTHER RX} macro. Sends the OTRSP RX command to the OTRSP device to activate RX corresponding to the currently inactive radio.
For example, if Radio 1 currently has keyboard focus and the {OTRSPOTHER RX} macro is invoked, the OTRSP RX2 command is sent to the OTRSP device,
but keyboard focus remains on Radio 1. (KL9A) (Coded by N2IC)
QSO Party: Simplify the code added in 1.0.5939 to count all callsign combinations of the Bonus Station. (Coded by K3CT)
TS-990: Send all three Stop DVK commands to the radio when the Esc key is pressed in SSB mode. (Coded by K3CT)
FTDX3000: Added support for the radio codec. The operation has been confirmed on SSB with on the fly message recording. Verifying Digital operation. Tnx W3SA.(Coded by K3CT)
IC-7300: Added polling of the AF gain for the AFGAIN macros. (Coded by K3CT)
Manual Radio: When setting split with a non-interfaced radio, transfer the mode to the TX VFO. (N1EN) (Coded by K3CT) 3.85 MB 11 Oct 2016 5912

N1MM Logger+ Update 1.0.5939.exe
PA QSO Party: Count all callsign combinations of the Bonus Station. (Coded by K3CT)
Info Window: Switch to native functions for calculating time intervals. (Coded by K3CT) 3.84 MB 06 Oct 2016

N1MM Logger+ Update 1.0.5936.exe
UDC - added new parameter /UsesLASTEXCHmacro/ that allows using {LASTEXCH} macro in UDCs (RA3TT) (coded by NA3M)
New digital contest "RUS-WW-DIG" added (coded by NA3M) 3.85 MB 04 Oct 2016 2036

N1MM Logger+ Update 1.0.5931.exe
TS-2000: Config help text change and manual update. When the baud rate is 4800 baud, use 2 Stopbits. For 9600 baud and greater, use 1 Stopbit. (EA5HYC) (Coded by K3CT)
Fix runtime error importing ADIF (ZA1P) (Coded by N1MM)
Function Key Message Editor: fix RTE if nothing is selected when copy is chosen (N1MGO) (Coded by N1MM)
Telnet: force update of spot timeout in UI if changed from bandmap (K0RC) (Coded by N1MM)
SASPRINT contest - second multiplier (DXCC) was added (LU5DX) (Coded by NA3M) 3.84 MB 27 Sep 2016

N1MM Logger+ Update 1.0.5924.exe
Fixed Broadcast Spot UDP message to handle worked double mults correctly (VE3KI) (Coded by N2IC)
Bearing: When displaying regional bearing reverse mile and km order for non-NA users. (N1MM) (Coded by K3CT)
Close COM ports that are no longer being used by N1MM+. (Coded by N2IC)
RSGBDX: Display an error message when users attempt to log QSO's on invaid bands. (VE1DT) (Coded by K3CT)
QTC Window: Correct issue that was causing the front half of QTC Header count to get cut off. (Coded by N2AMG) 3.84 MB 20 Sep 2016

N1MM Logger+ Update 1.0.5916.exe
RSGBDX: New contest. Please test, lots of details. Rules URL: http://www.rsgbcc.org/hf/rules/2016/IntDX.shtml (G4OGB) (Coded by K3CT)
WAE: ADIF import bug, no multipliers. (Coded by K3CT)
Entry Window menu, Tools, Download PDF Help File - fixed busted website link (coded by K8UT)
Digital: When clicking on a call or exchange in GRITTY focus is now passed back to the parent entry window once click event is finished. (Coded by N2AMG)
Bug: Corrected a mode category bug that surfaced from a change in mid-May. (Coded by N2IC & K3CT) 3.84 MB 13 Sep 2016

N1MM Logger+ Update 1.0.5908.exe
Catch UDPClient port in use for port 13064 (N1IA) (Coded by N1MM)
QTCWindow: Fix broken link to QTC window when using WEASSB. (Coded by N2AMG) 3.84 MB 07 Sep 2016

N1MM Logger+ Update 1.0.5903.exe
Network Status: Was not saving postion on operator change (AA5AU) (Coded by N1MM)
Multipliers: fixed runtime error on startup (OO7K) (Coded by N1MM)
Added code to catch "Access denied" runtime error when downloading & installing new version (SM5UFB) (Coded by N1MM) 3.85 MB 30 Aug 2016

N1MM Logger+ Update 1.0.5899.exe
CME Contest: Add multipliers to Multiplier, Counties/Other window. (EA5WU) (Coded by K3CT)
CNCW Contest: Correct the HQ multiplier. (EA5WU) (Coded by K3CT)
PA QSO: Change to the VE sections and bonus station. (N3LI) (Coded by K3CT)
Added option to "Never see again" the exit confirmation dialog. Did not change the unlogged contact dialog. You will need to edit or rename the ini file to restore exit confirmation (set IsSilentClose = false) (N9DK) (Coded by N1MM)
Statistics graphs: made title smaller and added non-persistent option to hide title (JG1VGX) (Coded by N1MM)
Added tool tips to DI window (K0RC) (Coded by N1MM)
EntryWindow: Prevent mouse wheel from changing cw speed (N1EN) (Coded by N1MM)
Score window: Show points per Q (M0CKE) (Coded by N1MM)
Network Status: reduce flicker in title bar (K1TTT) (Coded by N1MM)
Bandmap: added Set Spot Timeout as menu item to permit unassisted ops to set spot timeout without opening the Telnet window (K2PO) (Coded by N1MM)
Logger+ Audio: Fixed a bug when executing the "!" macro. Check the callsign entry after the current wav file completes. (N1MM) (Coded by K3CT)
When SO1V or SO1V and configuring a CW port, the label in the Configurer "Set" dialog will say "VFO Nr" instead of "Radio Nr". (Coded by N2IC)
Display an informational message at program startup if MorseRunner is active, but MorseRunner Mode has not been enabled. (Coded by N2IC) 3.83 MB 23 Aug 2016

N1MM Logger+ Update 1.0.5878.exe
EUHFC: Correct ADIF import. (S55O) (Coded by K3CT)
RunTime: After ADIF import eliminate the RunTime error on rescore. This also solves the empty log if the user exits after ADIF import. (several) (Coded by K3CT)
Added additional error handling to automated download of new versions. (Coded by N1MM)
Bandmap: Fixed runtime runtime error in sh/dx button. (NM5M) (Coded by N1MM)
Pressing ctl-down from a band not shown in band buttons would jump to lowest band. (Coded by N1MM)
On the Multipliers Countries window, the font of Oceania (OC) doesn't resize when changing fontsize (ON7RK) (Coded by N1MM)
When clicking on a spot from Waterfall Bandmap, make sure that focus is activated on correct Entry Window (PA5WT) (Coded by N2IC)
WAE: UA9 beam heading calculated based on UA direction. Changed to calculate all UA beam headings by oblast for this contest (LY5T) (Coded by N1MM)
Added a warning message if a Prolific-based USB-to-serial converter is being used for CW sending. (Coded by N2IC)
Icom: Remove the code which was used to detect out of date firmware. (Coded by K3CT)
Beam Heading: If Call History lookup is enabled and the grid square in the Loc1 field is valid, compute the bearing with the grid square. Call History import can read multiple files so it is not necessary to add grid square to every call history file. The incoming spot beam heading processing is unchanged. This is a future project. (Coded by K3CT)
CME Contest: Allow the an exchange of HQ. (EA5WU) (Coded by K3CT)
QTCWindow: Pressing PgUp or PgDn in the header text window causes focus to shift and background to change color. (Coded by N2AMG)
QTCWindow: Removes Minimize/Maximize button from QTCWindow form. (Coded by N2AMG)
QTCWindow: Corrects the workings of the {DIGQTCS} and {DIGQTCR} macro subs. These should work in all 3 modes. (Coded by N2AMG)
QTCWindow: In CW TU message on the setup window if user includes the {QTC} macro in the text it will send the contents of the QTC Header window.
This makes it work like this: TU {QTC} de N2AMG would translate to TU QTC 21/10 de N2AMG (Coded by N2AMG) 3.84 MB 16 Aug 2016

N1MM Logger+ Update 1.0.5849.exe
VHFNAC: EDI export issue caused by the change in contest descriptions in 1.0.5831. (SP1CNV) (Coded by K3CT)
Corrected a beacon callsign (coded by N1MM)
New contest dialog: widened selection control (coded by N1MM)
QTC Window: When closing out of Setup window return focus to last control used before opening setup. (Coded by N2AMG)
QTC Window: When Focus Other Always Swap is enabled disable it when QTC Window opens and re- enables it when it closes. (Coded by N2AMG)
QTC Window: Anytime focus is lost to another window, When QTC window gets focus back sets focus to last used control. (Coded by N2AMG)
QTC Window: Stops focus from being grabbed by another window as long as the QTC Window is open. (Coded by N2AMG)
Run time error when frequency longer than 9 characters in generic export (coded by N1MM)
Added additional F-keys to MorseRunner support. Requires this version of N1MM+ and version 1.68.1+ of MorseRunner, available in the Additional Support Files area. (Many) (Coded by N2IC)
IC-7300: Added USB-D & LSB-D modes. (N1MM) (Coded by K3CT)
IC-7600,IC-7850/1, Pro2/3: Fixed a bug in the selection of the digital mode. (Coded by K3CT) 3.84 MB 09 Aug 2016

N1MM Logger+ Update 1.0.5831.exe
UDC: New parameters PointsMultAtTimeLocal, PointsMultAtTimeGMT and PointsMultByMode added. See updated _UDC_HELP.txt file located in "...\N1MM Logger+\UserDefinedContests" folder for details (Coded by NA3M)
UDC: New argument LASTLETTER added for MultSqlString parameter. See updated _UDC_HELP.txt file for details. (Coded by NA3M)
UDC: New argument LASTLETTER, fixed incorrect handling callsigns with /x, /QRP at the end. (G4OGB) (Coded by NA3M)
Fix runtime error in Kenwood support when restarting after long timeout. (coded by N1MM)
Fix a cross-threading runtime error in Grayline when pressing a key at startup (Coded by N1MM)
Kenwood: Stop bouncing of frequency when freq changed via bandmap or available windows (Coded by N1MM)
Added tool tips to Entry Window and Bandmap right-click menus (Coded by N1MM)
Entry Window: Added expanded contest descriptions to tool tips in the File/New Log selection window (coded by K8UT)
Entry Window: Added expanded contest descriptions to File/Open Log selection window (coded by N1MM)
Added {SPACE} macro. This is the same as pressing the Space key. It is useful in non-ESM mode for auto-filling the exchange. For example: F2 exchange, 5nn 4{END}{SPACE} . (Coded by N2IC)
Added MorseRunner Mode checkbox in Configurer->Other. This works in conjunction with the new version of MorseRunner in the N1MM+ Files, Additional Support Files area. This greatly simplifies the integration of N1MM+ and MorseRunner by not requiring an AutoHotKey script. (KL9A) (Coded by N2IC)
UDC: New argument LASTLETTER, improved handling callsigns with "/" in the callsign. (G4OGB) (Coded by NA3M)
UDC: _UDC_Help.txt file updated. (Coded by NA3M) 3.84 MB 02 Aug 2016

N1MM Logger+ Update 1.0.5803.exe
Digital: Changes to Fldigi load routine that were needed for caption change to Fldigi. (Coded by N2AMG)
ADIF import: fix for logs with no seconds in timestamp (9A3OS) (Coded by N1MM)
Network Status: added column for Band. When one clicks on the Band column header, the stations will sort by Band & IsRunning. This is useful for large multi-mults (S57AW) (Coded by N1MM)
Network Status: forced resort of stations each time the list is updated (K3CT) (Coded by N1MM) 3.84 MB 26 Jul 2016

N1MM Logger+ Update 1.0.5796.exe
Increased the amount of time after download of new exe file before renaming (WK1J) (Coded by N1MM)
Available Window: Eliminated runtime error when ALT+A was pressed. (W5GN) (Coded by K3CT)
Digital Setttings: Fixed database error when special characters were passed in macro settings (K1RCT) (Coded by KU7T)
Entry Window: Send the TU message when the non-ESM TU/Log key is pressed and no callsign is in the callsign box. (KL9A) (Coded by K3CT)
Add import/export to Network Computer Names editor (S57AW) (Coded by N1MM)
Digital: Fldigi Change the title of Fldigi Window. Which was causing the Logger to not find handle for window. Corrected now. (Coded by N2AMG)
Callsign Voicing: If STROKEP.wav exists, play this wav file when /P are the last two characters of the callsign. (UA6AA) (Coded by K3CT)
RRCT Contest: Remove unwanted text behind the Entry Window exchange entry frame. (W1RM) (Coded by K3CT)
ADIF Import: Fix rare bug where import of two QSOs with the same station was not permitted even though at different times. (9A3OS) (Coded by N1MM) 3.82 MB 19 Jul 2016 1919

N1MM Logger+ Update 1.0.5785.exe
Corrected "Don't work non-mults" error message to reflect current option location (LA9RY) (Coded by N1MM)
Added debugging info to catch illegal characters in spot comment. (BA4ALC) (Coded by N2IC)
Minor spot tweaks for compatibility with Waterfall Bandmap. (Coded by N2IC)
Telnet/Filters tab: "Why don't I see spots" button was hidden (N2WQ) (Coded by N1MM)
UDC: latest version of_UDC_HELP.txt file is copied into ...\N1MM Logger+\UserDefinedContests folder with every new update (Coded by NA3M) 3.82 MB 12 Jul 2016 6679

N1MM Logger+ Update 1.0.5774.exe
SASPRINT contest - each multiplier (SA prefix) should be counted once regardless of the band and mode (LU5DX) (Coded by NA3M)
Statistics: Fix runtime error on startup (Coded by N1MM)
Spot Broadcast: Ignore illegal characters in the spot comment.(BA4ALC) (Coded by N2IC)
Entry Window: When repeating CQ is running the File menu text is partially convered by a Form Label. (W1RM) (Coded by K3CT)
NRRLVINTER contest: swapped GRIDs and serial numbers in Cabrillo file data. (LB3RE) (Coded by NA3M)
Open forms were not closing properly on program exit if Grayline was open (Coded by N1MM)
Fixed runtime error minimizing app when Grayline is open (Coded by N1MM)
Send Corrected Call: When Send Corrected Call and Send Partial Calls are enabled and the callsign correction involves removing a portable designator, the program did not send the correct suffix or prefix. (UA6AA) (Coded by K3CT) 3.80 MB 05 Jul 2016 8943

N1MM Logger+ Update 1.0.5763.exe
Rover Mode: Bug fix to the ROVER-LIMITED and ROVER-UNLIMITED change in 1.0.5752. (Coded by K3CT)
Runtime Error: Fixed a runtime error when playing a wav file. (G3YYD) (Coded by K3CT/N1MM)
DL-DX-RTTY: Change CabrilloVersion to "3.0" (DJ3IW) (Coded by N1MM)
Added new SA Sprint (SASPRINT) contest (LU5DX) (Coded by NA3M)
UDC: bug fixed for the case when MultSqlString =Grid and DoNotCountMeAsMult = True (G4OGB) (Coded by NA3M)
Corrections to SA Sprint (SASPRINT) contest (Coded by K3CT/NA3M)
Digital: When used in Second Entry Window Fldigi was using wrong offset to calculate frequency. (Coded by N2AMG)
IOTA: Added mode and band change count for Multi-Two. Multi-Two operation needs testing. (Coded by K3CT)
Entry Window: corrected "Open Explorer on User Files Directory" to help menu to aid in debugging by users (Coded by N1MM) 3.80 MB 28 Jun 2016 4620

N1MM Logger+ Update 1.0.5752.exe
Callsign Voicing: When using STROKEP.wav with send corrected callsign, the callsign was voiced when it was unchanged. (UA6AA) (Coded by K3CT)
Handle race condition in networked computers interlock when multiple users try to transmit simultaneously. (9A3OS) (Coded by N2IC)
When editing a cell in the Log window by double-clicking, put cursor in cell instead of Entry Window. (Coded by N2IC)
Added a new right-click option to the Talk window. After sending a talk message, the Talk window will minimize and focus will go to the Entry Window. Typing ctrl-e from the Entry Window will return the Talk window to its normal state. This can be used to minimize the amount of screen space devoted to the Talk window. (Coded by N2IC).
JIDXCW/SSB: Contest start time changed. (VE1DT) (Coded by K3CT)
Cabrillo: Specification change, FM mode added to Mode Category. (Coded bt K3CT)
Cabrillo Soapbox: Convert carrage return to space, limit Soapbox line to a maximum of 75 characters. (Coded by K3CT)
REGIOVHF: Remove unused code in the contest class. (Coded by K3CT)
Entry Window: added "Open Explorer on User Files Directory" to help menu to aid in debugging by users (Coded by N1MM)
Added ROVER-LIMITED AND ROVER-UNLIMITED to Cabrillo Station options (N2MH) (Coded by N1MM)
Added VHF-3-BAND and VHF-FM-ONLY to Cabrillo Band options (Coded by N1MM)
Updated RDAC.sec file (DL6KVA) (coded by NA3M)
UDC: added new argument for /BonusPoints/ - "ExchIs_xxx" and new parameter /ResetSNEverySession/, see updated _UDC_Help.txt (G4OGB) (coded by NA3M)

N1MM Logger+ Update 1.0.5738.exe
Portugal Contest: The Summary window titles are switched. (SM4DQE) (Coded by K3CT)
DRCG, BARTG and VOLTA RTTY contests: make sure file Exchpoints.sec is loaded in Admin database for correct points calculation. (ON6AT, ZL1WN) (Coded by NA3M) 3.80 MB 14 Jun 2016

N1MM Logger+ Update 1.0.5733.exe
Fix runtime error when switching to last antenna specified in band list (W9ILY) (Coded by N1MM)
When a station is worked on a frequency, show an unworked station if there is one on that freq after the QSO is logged. (Coded by N1MM)
Configurer: Set the default rotor control address to 12040 (Coded by N2IC)
Digital: When clicking on the Align Button now stops moving up waterfall if the frequency does not need to be changed. (Coded by N2AMG)
Digital Setup: Full detail messages were not showing fully near the call sign validity setting. (Coded by N2AMG) 3.79 MB 08 Jun 2016

N1MM Logger+ Update 1.0.5717.exe
Other multipliers: fix rte in EUPSKDX contest (NA3M) (Coded by N1MM)
Logger+ Audio: When voicing callsigns (F5=!), correctly voice callsigns containing "/". If the callsign contains "/P", play STROKEP.wav if it exists instead of STROKE.wav followed by P.wav. (UA6AA) (Coded by K3CT)
King Of Spain Contest: SMR multiplier not counted. The multiplier was in the list but not loaded into the users database. (DL2SAX) (Coded by K3CT)
Configurer: fixed minor color issue on Broadcast tab (Coded by N1MM)
Configurer: fixed runtime error when user put invalid character in antenna tab band column (VE7BGP) (Coded by N1MM)
Configurer: Set the default rotor control address to 12040 (K6RIM) (Coded by N2IC) 3.79 MB 31 May 2016

N1MM Logger+ Update 1.0.5707.exe
In Configure Ports->Broadcast Data, added broadcast spots and broadcast rotor configuration. (Coded by N2IC) 3.79 MB 24 May 2016

N1MM Logger+ Update 1.0.5698.exe
UDP contactReplace: fix bug with contactDelete not preceeding contactReplace packet when editing most recent record (NY4I, K8UT) (coded by N1MM)
Contest Setup: Cabrillo 3.0 change, add 4M to the band selector. (G3FRE) (Coded by K3CT)
Log: Made minimum size 100 x 400 (KE5LQ) (Coded by N1MM)
Contest Setup: Changed category from "MIXED" to "SSB+CW", and "MIXED+DIG" to "SSB+CW+DIGITAL". (N1EN) (Coded by N2IC)
Fixed Cabrillo output to use "MIXED" instead of "MIXED+DIG". "MIXED+DIG" is not a legal Cabrillo mode. (Coded by N2IC)
When using two keyboards, ctrl-t now transmits on the radio associated with the keyboard. (K1TTT) (Coded by N2IC)
Digital: When typing RTTY/PSKxx was causing a jump in frequency when digital window opened. Now fixed. (Coded by N2AMG)
Digital: When clicking on mult in bandmap or available window was not setting correct frequency if Digital window had not been opened. (Coded by N2AMG)
CW /SSB: When Clicking on CW or SSB mult or bandmap and Digital Window was open was not clearing the digital offsets before setting new frequency. (Coded by N2AMG) 3.79 MB 17 May 2016

N1MM Logger+ Update 1.0.5674.exe
Grayline: Fixed icon and added coloring of menus & form (K3CT) (Coded by N1MM)
Grayline: Form was not closing if reopened (Coded by N1MM)
Fixed exchange overwrite for QSO parties when call history enabled, or station location is determined by prefix. (N7CW). (Coded by N2IC)
Multiplier Band/Mode Selection: Enforce a minimum size. (K3CT) (Coded by N1MM)
Country: When determining country from callsign remove trailing slash followed by numbers greater than nine or a single slash character. (Coded by K3CT)
EA RTTY & EA PSK: Display the EA Spanish Province and HQ multiplier in the Multiplier, Other window. Now all multipliers can be displayed in two multiplier windows. Please test. (DL5KUD) (Coded by K3CT)
RCCCUP contest: Fixed incorrect sent exchange ("00" instead of zone) in the Cabrillo file (RU1QY) (Coded by NA3M)
Catch Winkey unauthorized access exception real time error (K6KAL). (Coded by N2IC)
Digital: When switching modes in Fldigi the Radio mode was not switching to the mode to use for that digital mode. (Coded by N2AMG)
Digital: When clicking on EW Band Buttons Mode set to the digital engines would not always be correct. (Coded by N2AMG)
Digital: Corrects RT Error when trying to load the digital window. (Coded by N2AMG) 3.79 MB 10 May 2016

N1MM Logger+ Update 1.0.5644.exe
Rover Mode: Changed the rover mode error message. Rover mode is only enabled when the Station Category is Rover or Mobile. (NH6Z) (Coded by K3CT)
UDP ContactReplace packet: now preceded by a contactdelete packet (coded by K8UT)
UDP ContactDelete packet: timestamp changed to UTC time (coded by K8UT)
Grayline: made peformance improvements for those running more than two core processors (Coded by N1MM)
Added UDP spot broadcast. To enable, add IsBroadcastSpots=True and BroadcastSpotsAddr=IP Address:Port (example: BroadcastSpotsAddr=127.0.0.1:12050) to ExternalBroadcast section of N1mm Logger.ini. XML schema for spot broadcast in http://n1mmplus.hamdocs.com/tiki-list_file_gallery.php?galleryId=5 , Filename spot_schema.txt . (Coded by N2IC)
Log: Sort dupe pane QSOs by call & timestamp for VHF contests and QSO parties (K8MR) (Coded by N1MM)
Log: Allow reordering of columns (Coded by N1MM)
Log: Show year in timestamp for any contest whose start date is not the same as the current year. (N1MM) 3.79 MB 03 May 2016

N1MM Logger+ Update 1.0.5613.exe
Restore operation of Pause key (W4AU) (Coded by N1MM) 3.79 MB 20 Apr 2016

N1MM Logger+ Update 1.0.5611.exe
Digital: Adds case to the isvalid(callsign) routine so exchanges that end with a number does not pass the isvalid routine.(G4OGB) (Coded by N2AMG)
Win 10: adjust snap-to settings to align windows more accurately. (K3PA) (Coded by N1MM) 3.79 MB 19 Apr 2016

N1MM Logger+ Update 1.0.5605.exe
Made sure that zero points are awarded for incorrect modes during rescore (K3CT) (Coded by N1MM)
Multiplier windows: Multiplier abbreviations were getting truncated (K8UT) (Coded by N1MM)
Beam heading for Sevastopol city (oblast SE) was incorrect (RA6YDX) (coded by NA3M)
Change UDP broadcasts back to UTF8 encoding (K3IT) (Coded by N1MM) 3.79 MB 15 Apr 2016

N1MM Logger+ Update 1.0.5598.exe
TS-480: In voice mode, enable the ANI audio input when "Use Radio Codec" is checked and a wavefile is played by the program. This radio audio input bypasses the MIC circuits and speech processor. (M6BIR) (Coded by K3CT)
ROLO contest: Changed the ROPOCO contest to the new ROLO contest rules. Changed the contest to store the exchange in the MiscText field so the Comment field is available for users notes. If you want to open an old ROPOCO contest for log export, install a prior program version. Fixed the contest start/stop time, changed to Cabrillo 3.0, and corrected various contest specific labels. Users that have a ROPOCO contest stored in the database will have to correct the contest exchange box. (G4OGB) (Coded by K3CT)
Runtime Error: Eliminate a Runtime Error when using the {QSYCQ} macro and a CQ spot is not found. (LY5T) (Coded by K3CT)
UDP AppInfo packet: fixed bug - broadcast message sent when program launches, when New contest is selected, or current contest Changes (W1TR, coded by K8UT)
UDP ContactInfo packet: added the sender's StationName field to ContactInfo (coded by K8UT)
UDP RadioInfo packets: changed to also include the sender's StationName field to RadioInfo when station is not networked (coded by K8UT)
UDP ContactReplace packet: new XML packet "ContactReplace" sent when an existing contact record is changed (coded by K8UT)
UDP ContactDelete packet: new XML packet "ContactDelete" sent when an existing contact record is deleted (coded by K8UT)
UDP packets: replaced string concatenation with StringBuilder routines for XML strings (ContactInfo, RadioInfo, ContestInfo, AppInfo) (coded by K8UT)
Digital: Gritty implementation updated. Text now prints to Attached and RX windows. Makes use of JSON Parse routines by Dave AA6YQ
to parse recieved text at a much improved rate with only a 2-3 character delay. (Coded by N2AMG)
Digital: When using the backspace key or when a backspace is recieved in text eleminates most screen flicker. (Coded by N2AMG)
Digital: In the normal RX windows pause bar would turn on for no reason at all. Was found and corrected. (Coded by N2AMG)
EARTTY: Correctly sets the Mult now for EA4URE's HQ exchange. (Coded by N2AMG)
Digital: When using the RX pause routines and you moved the mouse out of the attached rx window it would not
undo pause like it should have. Now Fixed. (Coded by N2AMG)
Beam heading for Crimea (oblast RK) was incorrect (K3CT) (coded by NA3M)
Multipliers: left column was getting clipped (K0RC) (Coded by N1MM)
N1MM Logger+ Update 1.0.5578.exe
Gagarin Cup (GCup): corrected list of multiplier stations, ..55YG were replaced with ..55GC. Stations with 55YG suffixes are only good for award program (RT3A) (coded by NA3M) 3.77 MB 06 Apr 2016 3624

N1MM Logger+ Update 1.0.5576.exe
Make Windows/Rotor Windows display rotors for both entry windows no matter which is clicked (N2IC) (Coded by N1MM)
Allow any width mult in mult window (W2NRA) (Coded by N1MM)
Statistics: days with all dupes would show incorrect totals (VE1DT) (Coded by N1MM)
EA RTTY: Add EA4URE as a multiplier sending "HQ" (Coded by N2AMG)
FontSizer adjustment not remembered on Messages, Notes, Max Rates and other windows using MsgForm (G3RXQ) (Coded by N1MM)
Gagarin Cup (GCup): updated list of multiplier stations (..55YG) according to new rules for 2016 (coded by NA3M) 3.78 MB 05 Apr 2016

N1MM Logger+ Update 1.0.5566.exe
Save main program rotor windows postiion. Eliminate min/max buttons. (Coded by N1MM)
Telnet buttons were being clipped (W3DQ) (Coded by N1MM)
Fix for band change timer (Coded by N1MM)
Allow opening of main program rotor windows from Windows menu (only if rotor windows are selected to be displayed in the Configurer Antennas tab) (Coded by N1MM) 3.78 MB 29 Mar 2016

N1MM Logger+ Update 1.0.5555.exe
VA QSO Party: Rules changes. Log mobile stations with /M or /County to receive the 3 point QSO credit. This rule is not supported: "Mobile and Expedition stations that contact 10 (ten) or more different stations while operating from a county or independent city may claim it as a multiplier, if not otherwise worked.". (KK4VA)(Coded by K3CT)
RDAC: Show only worked mults in States/Sections. Support in Counties/Other window (NA3M) (Coded by N1MM)
QSO Party: Combined the DE QSO party into the four contests used during the 7QP, IN, NEWE weekend. Modified the DE QSO party to accept the exchanges from the other three. Modified IN7QPNE to accept the DE QSO Party exchanges. Please test and report issues. (Coded by K3CT)
EPCPSK63QP: Runtime error when generating Cabrillo. (OH2KM)(Coded by K3CT)
Error log change in version 1.0.5536 prevented the display of the Use Logger+ Audio menu option. (Coded by K3CT) 3.78 MB 22 Mar 2016

N1MM Logger+ Update 1.0.5541.exe
Call History: allow callsigns with "5NN" embedded. (VP9KF) (Coded by N1MM)
SH/DX button in BandMap, "sh/sun" Telent command for selected spot was not working (JT1CD) (coded by NA3M)
Remove defrag at the end of ImportCallHistory. Was locking the database (Coded by N1MM) 3.77 MB 16 Mar 2016

N1MM Logger+ Update 1.0.5536.exe
Fixed LPT port footswitch operation. (KU7Y) (Coded by N2IC)
Fixed focus issues with Grayline title bar, VisibleDupe title bar, Rotor title bar (not rotor app), clicking on the log splitter, Log column header click, Log column resize, Score summary title. The title bar fixes may not show the focus in the entry window, but the next character will be typed in the EW control with focus (VE1DT) (Coded by N1MM)
Catch errors loading call history file (ON6NL) (Coded by N1MM)
Digital: Removes unused macro's {SENTNR},{BEEP}, {PGDELAY} from Digital Setup Window list. (Coded by N2AMG)
Digital: Corrects not opening and closing digital windows when clicking on digital spot. (Coded by N2AMG)
In error log, report correct Windows version. (N9BC) (Coded by N2IC)
Radio Control: Added IC-7300 radio. Radio not available for testing, report any issues. This radio can not be used in SO2V mode because Icom did not provide VFO-specific (VFOA, VFOB) frequency and mode polling commands. Instead they provided Selected and UnSelected VFO commands. (Coded by K3CT)
RGSBBERU: Fix scoring of bonus stations (VE3KI) (Coded by N1MM) 3.77 MB 15 Mar 2016

N1MM Logger+ Update 1.0.5513.exe
Changes made to keep call from disappearing in the middle of a split frequency QSO. (Coded by N2IC)
Fix {OTRSP XXXX} command. (N4OGW) (Coded by N2IC)
For ARRL DX and ARRL RTTY Roundup, change default abbreviation for Northern Territories to NT. (VE8EV) (Coded by N2IC)
UDC: IsWorkable was only working with upper case values (for example: SAonly did not work but SAONLY did) (G4OGB) (coded by NA3M) 3.77 MB 08 Mar 2016

N1MM Logger+ Update 1.0.5505.exe
For 2 keyboards, fixed occassional scrambled callsigns. (K3WW) (Coded by N2IC)
Fixed dueling CQ mis-starts when partial call entered and PTT hangs. (EA2OT) (Coded by N2IC) 3.77 MB 01 Mar 2016

N1MM Logger+ Update 1.0.5499.exe
CWOps: When starting the last session within three hours of the beginning correct the start date. (W5YDM)(Coded by K3CT)
Added support for multiple OTRSP devices. Added support for MK2R and 1 or more OTRSP devices. (OK2ZI) (Coded by N2IC)
Multi-op PASS messages are (again) sent to the Info window, as well as the Talk window. (K3CT) (Coded by N2IC)
For SO2R, fixed Multiplier window spot buttons to go to correct radio for the band. (KE5LQ) (Coded by N2IC) 3.77 MB 26 Feb 2016

N1MM Logger+ Update 1.0.5491.exe
OK QSO Party: Rules change. Do not combine CW, RTTY, PSK together into one mode. (K5CM) (Coded by K3CT)
UDC: removed BandChangesPerPeriod parameter, added multiple new params to control Band Change Timer/Counter, see updated Help.txt file. (coded by NA3M)
UDC: all public variables used by UDC are initialized to avoid effecting non UDC contests, EW tooltip that tried to display the Time Since last QSO and Band Change was removed (K3CT) (coded by NA3M)
UDC: reset some UDC public variables in ClearUDCvariables() before loading new contest by clicking on numbered list contests (bottom of the File menu), Band Change Counter initializing was not working when UDC had CountBandChangesPerPeriod turned on (coded by NA3M)
Removed erroneous LogError message that fills up error log. (Coded by N2IC)
Contest: Remove RSGB160CW. (G3YMC) (Coded by K3CT)
Icom Radio: After pressing ALT+S the frequency displayed in the Entry & Bandmap windows did not update with some Icom radios. (AF6WG) (Coded by K3CT)
ARRL DX CW, ARRL DX SSB, ARRL RTTY ROUNDUP, CQ 160: changed abbreviation for PEI to PE (many) (Coded by N1MM)
NC QSO Party: Bonus station & county changes. (Coded by K3CT)
Log: Fix some situations where focus is not returned to the entry window (W1UE) (Coded by N1MM) 3.76 MB 24 Feb 2016

N1MM Logger+ Update 1.0.5481.exe
Fixed real time error at startup on XP. (K1RX) (Coded by N2IC)
Digital: When closing the Digital Settings window now close and restart the Digital windows to reset variables that were causing a RT error. (Coded by N2AMG)
Digital: When loading DI windows checks to make sure Entry Window exists before trying to set dot colors to prevent RT Errors. (Coded by N2AMG)
Added experimental feature - 2 keyboard support for SO2R. New menu item in Configurer->SO2R to enable it. Plug in two keyboards before starting N1MM+. The first keyboard you type in controls the left Entry Window. Other keyboard controls right Entry Window. Pause key is disabled. \ key moves to Entry Window associated with that keyboard. (Coded by N2IC) 3.77 MB 16 Feb 2016

N1MM Logger+ Update 1.0.5472.exe
Fix for runtime error spotting station. (DK5AX) (Coded by N1MM)
For CQWW, do not allow a QSO to be force-logged with an invalid zone. (PJ2T) (Coded by N2IC)
UKEIDX: fix for - incorrect received serial # was logged in ESM + S&P mode. This version has separate fields for Serial # and District, correctly imports ADIF files created with older versions. (several) (coded by NA3M)
WWV: show last solar flux numbers, not first (LY5T) (Coded by N1MM)
CWOPS: Remove the non-member exchange error checking for DX country. (VE3KI) (Coded by K3CT)
FOCCW: Change in the contest start time. (W1EBI) (Coded by K3CT)
Improve error recovery when ini points to deleted contest (Coded by N1MM)
Fixed zone lookup for wl_cty.dat exception calls. (VE1DT) (Coded by N2IC)
Fixed real-time error when generating Cabrillo and the Sent Exchange is not correct. (AA7V) (Coded by N2IC)
SC QSO Party: Rules changes, start/stop time and added bonus station. (WN4AFP) (Coded by K3CT)
K3: At times remove the delay added for the firmware to correctly switch Dual Rx On/Off so the user can press Ctrl+Up/Dn rapidly without stopping. The delay caused the program to update the various windows after the last key press. Watch for possible firmware issues to surface when the program switches Dual Rx On/Off during frequency changes. (N3RD) (Coded by K3CT)
FT-2000: A firmware issue causes the radio to ignore a frequency change command required by the "Reset Rx Frequency to TX when QSO is Logged" feature. The code was changed to stop polling the radio during CW transmissions. Note: the firmware bug will still surface when the user is sending (not the program) and a QSO is logged. This is a radio limitation. (K2QB) (Coded by K3CT)
Make sure program sends 5NN for {SentRSTCut} at startup when no call is entered (W4ZV) (Coded by N1MM)N1MM Logger+ Update 1.0.5452.exe ARRL School Club Roundup: change rules to allow separate cw & digi contacts. Set minimum off time to 10 minutes (N7FLT) (Coded by N1MM)
ComPort Config Menu: Reposition GUI items slightly so they are displayed clearly.(Coded by K3CT)
When using Winkey speed pot only for paddle/keyboard, ignore pot movement when sending F-key messages. (KE2D) (Coded by N2IC)
Log: fix error losing focus when editing cell (N2IC) (Coded by N1MM)
Info Window: The last 100 Q rate in networked mode with more than one station on the same band was calculated incorrectly. (Coded by K3CT) 3.76 MB 19 Jan 2016

N1MM Logger+ Update 1.0.5438.exe Fixed ADIF import for NAQP and other contests that use "name". (Many) (Coded by N2IC)
PACC: Made mults per band and mode for all entrants (PA1M) (Coded by N1MM)
Log: Right click on highlighted callsign would immediately close menu (SM3CER) (Coded by N1MM) 3.76 MB 14 Jan 2016

N1MM Logger+ Update 1.0.5433.exe Version 1.0.5433 (January 12, 2016)
Function Key Editor: Fixed an error that caused save button to be disabled (K3CT) (Coded by N1MM)
DE QSO Party: Change to the county abbreviations.(WD3C)(Coded by K3CT)
IN QSO Party: Change to the start and end times. (Coded by K3CT)
NH QSO Party: Rules changes. (K1RX)(Coded by K3CT)
Log: Made marking of current rows different from the mouse-over row. This will make operations (like copy) on multiple rows more obvious.(Coded by N1MM)
Telnet: Minor efficiency improvements, code cleanup. For single CPU computers using internal CW generation, give up control for improved CW generation. (Coded by K3CT)
Telnet: If the users computer falls behind unable to process the telnet spot flow display an Info window message when the program deletes the unprocessed incoming telnet spots and starts over with an empty input buffer. These occurrences are also logged in the LogError.txt file. For the first occurrence display a NIMB (Non-Intrusive Message Box) in the Entry window informing that additional messages will only be displayed in the Info window. To prevent this from occurring repeatedly add filtering at the telnet source, change to a WinKey for CW generation, or upgrade to a multi-core computer. (coded by KU7T & K3CT)
Slightly improve the performance of Log Contact by removing suspend/remove layout from code path (Coded by N1MM)
Removed e-mailing log to some contest sponsors pending further study by the N1MM team. (Coded by N2IC)
wl_cty.dat: Updating to latest version for new installations (Coded by KU7T)
master.scp: Updating to latest version for new installations (Coded by KU7T)
Log: Added tool tip to indicate meaning of highlighting on callsign, i.e. not in Master.scp (Coded by N1MM)
Log: Added log name and db name to "no qsos" message to raise user awareness of dbs vs logs (Coded by N1MM) 3.76 MB 12 Jan 2016

N1MM Logger+ Update 1.0.5413.exe Patched another hole that allowed users to select "Do_Not_Use_Or_Erase.s3db". (N4ZR) (Coded by N2IC)
SARTG-NY-RTTY: Score window titles are reversed. (DH8BQA)(Coded by K3CT)
Rover Mode: When Cabrillo 3.0 is used enable Rover Mode if the StationCategory is ROVER or MOBILE (remove EXPEDITION). The manual will be updated. (Coded by K3CT)
ARRL RTTY: Populate exchange box from log before performing call history lookup. (W6SX)(Coded by K3CT)
Multi-computer call stacking: When a stacker removes a callsign, make sure the stack on the stackee computer is emptied. (Coded by N2IC) 3.75 MB 05 Jan 2016

N1MM Logger+ Update 1.0.5403.exe Configurer: A few more tweaks to the BroadcastData tab. (Coded by N2IC)
New "preferred spotter" feature: Designate a "preferred spotter" in Telnet/Filters whose spots get handled with priority and highlighted in all windows (great for ops with local skimmer). (Coded by KU7T)
Info: Eliminate a runtime error during program shutdown. (OT6M)(Coded by K3CT)
ADIF Import: Fix errors occuring on all imports. (K3CT) (Coded by N1MM)
Talk window now only shows talk messages. Previously, messages from the Info windows were also being shown in the talk window. (Coded by N2IC)
Available Window: Some skimmer S/N formats do not display. (N2IC)(Coded by K3CT)
OKDXRTTY: User operated the contest with call history enabled and the wrong call history file loaded. Caused a scoring issue. (W4PK)(Coded by K3CT) 3.75 MB 29 Dec 2015

N1MM Logger+ Update 1.0.5394.exe Logger+ Audio: Removed the change in 1.0.5388 that allows playing other wav file formats because of intermittant file in use errors. (Coded by K3CT)
Configurer: fix for multi-ip broadcasts. If you are getting error messages about broadcast addresses, open the configurer and "ok" out of it to fix them (K1TTT) (Coded by N1MM)
UDC: correction to /BonusPoints/ parameter, "IsComment, +*" can be used to add bonus points to /PointsPerContact/ (G4OGB) (coded by NA3M) 3.75 MB 23 Dec 2015

N1MM Logger+ Update 1.0.5388.exe Fixed unnecessary error message that was displayed when File/Open Database was canceled. (9A3OS) (Coded by N1IK)
Logger+ Audio: Fixed a bug that prevented PTT from dropping on an audio file error or audio player error. (ZL4PW)(Coded by K3CT)
Logger+ Audio: Will now play PCM or floating point WAV files. It should also play MP3, AAC, and WMA files. Looking for performance reports. (Coded by K3CT)
Logger+ Audio: When the function key contains ! Logger+ Audio player will convert and play entire callsign files, letter fragment files, or individual letter files. The callsign can be changed while the wav files are playing. (Coded by K3CT)
Added log submission addresses for ARRL DX, ARRL SS, RTTY Roundup, ARRL 10M, ARRLVHF, CQVHF, CQWPX, CQWW (Coded by N1MM)
SO2R: Fixed problem that sometimes causes {END} macros to be processed before a recently-started wav file has finished playing. (Coded by N2IC)
Fix error in rotor code caused by update to external broadcast entries (DL4AC) (Coded by N1MM)
Digital: Fix for Pause not working correctly when in Xmit.. (Coded by N2AMG)
Radio Control: Added FTDX5000 and IC-7600 to the list of radios that require mode before frequency. Corrected a frequency error when clicking on USB/LSB spots. (K3PA)(Coded by K3CT)
WinKey: The ] key now sends SK. (Coded by K3CT)
Info Window: Corrected an error in the QSO count display when using the Only Current Band option. (Coded by K3CT) 3.75 MB 22 Dec 2015

N1MM Logger+ Update 1.0.5375.exe LZDomestic: Rules change, include the mode when determining if a station can be worked again. (LZ2BE)(Coded by K3CT)
9ACW: Rules change for Multi-One. (9A3OS)(Coded by K3CT)
Modified heading lookup for K0,5,6,7,8,9 lookup, which gets confused by wl_cty.dat. (VE1DT) (Coded by N2IC)
For USA exception callsigns in wl_cty.dat, use the CQ Zone to compute heading. (Coded by N2IC)
PACC: Change non-PA contestants to get one mult per band & mode (PA1M)
Configurer: Support setting up contest, contact and radio udp broadcasts in UI instead of by editing ini file (Coded by N1MM)
Provide instructions for the user if their N1MM Logger.ini file is bad. (Coded by N2IC)
For ARRL 10 meter contest, split score summary multiplers (states/provinces, countries). (CX6VM) (Coded by N2IC) 3.75 MB 15 Dec 2015

N1MM Logger+ Update 1.0.5354.exe When changing contest logs, write to the correct transaction file for that contest. (K5GO) (Coded by N2IC)
wl_cty.dat: including latest version for brand new installations (Coded by KU7T)
Orion: Was always defaulting to 400 Hz when switching to cw modes or switching bands. Now will default to user-selected wide or narrow filter in cw or ssb. (K8IA) (Coded by N1MM)
Log: Editing a zone with an invalid value was causing a runtime error and deleting the affected QSO. (9A3OS) (Coded by N1MM)
Log: Cancel any pending edits in dupe pane before pane is refreshed. (DK5AX) (Coded by N1MM)
InvalidCastException in Contest object fixed (F4FSY) (Coded by KU7T)
WAE RTTY: When first QTC was skipped unable to enter any other QTC. Corrected. (Coded by N2AMG)
WAE RTTY: The RX window pause bar is disabled when sending QTC. (coded by N2AMG)
SO2R: When setting frequency from keyboard, improved message to warn the user if they try to put both radios on same band. (KD4D) (Coded by N2IC)
Information in Call History file is now used for heading calculation. However, the heading is not updated until the cursor moves to the Exchange field. (K3PA) (Coded by N2IC)
Packet spot processing: Fixed parsing error of batched spots on non-master station which affected incoming spots and spot filtering during times of high spot volume (W2FU, K0SM, KU7T) (Coded by KU7T)
Added optional functionality to send email with cabrillo file to logs@supercheckpartial.com. Helps to compile better coverage files for SCP in the future (K6TU) (Coded by KU7T) 3.74 MB 08 Dec 2015

N1MM Logger+ Update 1.0.5334.exe Database Copy: Unable to copy some contests to another database. (K3PA)(Coded by K3CT)
Updated tool tip on Telnet window list of node prefixes (N4ZR) (Coded by N1MM)
EntryWindow 2: Properly unregistering event handlers to fix ObjectDisposedException (9A3TY) (Coded by KU7T)
Digital Window: Correct Pause operation. (Coded by N2AMG) 3.74 MB 01 Dec 2015

N1MM Logger+ Update 1.0.5325.exe Fixed Sweepstakes Cabrillo generation for some users who do not have interfaced radios. (Many) (Coded by N2IC)
When a new opertor OPON's, use and save existing skin & layout under the new operator's callsign (Coded by N1MM & K3CT)
Remove obsolete contests from new contest dialog (K8UT) (Coded by N1MM)
Update my country and my continent labels in Telnet Filters tab when station info is updated (K3CT) (Coded by N1MM)
QTCWindow: Create Skip button to allow QTC row to be skipped. Will clear and allow entry after pressing associated Again button. (Coded by N2AMG)
QTCWindow: When in RTTY RQTC mode focus was not staying with QTC Window. Coded by N2AMG)
Digital Window: If WAE contest chosen make RX window type equal Scrolling not Non-Scrolling. (Coded by N2AMG)
Digital Window: When user clicks the pause bar keep pause turned on until they press the pause bar again to turn it off.
If using Callsign pause routine pause will undo when mouse leaves the rx window. Same for when Scroll is used to scroll the window. (Coded by N2AMG)
MMVARI MultiRX Window: AFC width and AFC Level menu selections were inverted. (Coded by N2AMG)
Digital Window: Fldigi was not handling vbcr or vbcrlf characters. All vbcr and vbcrlf now converted to vblf characters. (Coded by N2AMG)
Telnet: Country & Continent filters were interacting in unpredictable ways causing erratic filtering (N4ZR) (Coded by N1MM)
Macro: If the {LASTPASSEDFREQ} frequency string contains a period convert it to a "R". (N3RD)(Coded by K3CT)
Info: Performance improvement/bug fix for time since last QSO calculation (DF1LX) (Coded by N1MM)
Exclude dupes from Statistics window calculations (N2IC) (Coded by N1MM) 3.74 MB 24 Nov 2015

N1MM Logger+ Update 1.0.5309.exe Fixed SS exchange parser. (K6LL) (Coded by N2IC) 3.73 MB 17 Nov 2015

N1MM Logger+ Update 1.0.5307.exe Prevent users from force-logging SS QSO's that have bad information. (Many) (Coded by N2IC)
Fix RTE in XMLDescription when sending broadcast message. (K9DUR) (Coded by N2IC)
ADIF: Several additional contests including UKRAINDX did not import the section field correctly. (LX2BE)(Coded by K3CT)
AutoHotkey integration: Fixed incompatibility issue with Ahk2exe (W4BQF, N1EN) (Coded by KU7T)
MorseRunner-N1MMLPlus.ahk: Updated setup steps (N6XI, N4ZR) (Coded by KU7T)
Fixed RTE in View->Statistics when a row or column that is inappropriate for the contest is chosen. (K1RM, N0OJ) (Coded by N2IC)
For Winkey version 23 and later, increase number of characters sent in first block from 30 to 50. If a Winkey
buffer 2/3 full message is received, throttle back to 30 characters. (Coded by N2IC)
RunTime: Eliminate a radio control run time error for Icom radios. (VE1DT)(Coded by K3CT)
Accessibility: Fixing Station dialog to make it usable by blind or low vision operators via screen reader tools like Win+Enter (AC7T) (Coded by KU7T) 3.74 MB 17 Nov 2015

N1MM Logger+ Update 1.0.5295.exe AutoHotkey integration: Added support for 64 bit installations (W4BQF) (Coded by KU7T)
AutoHotKey integration: Don't allow a .exe to be an AHK file. (Coded by N2IC)
AutoHotKey integration: Don't terminate existing AHK invocation when N1MM+ is started and no N1MM+ AHK file is specified. (N6XI) (Coded by N2IC)
WAG: ADIF import did not import the section field correctly. (LX2BE)(Coded by K3CT)
PSK MultiRX: window was not reopening if program was closed by closing the Entry Window. Corrected (Coded by N2AMG) 3.74 MB 10 Nov 2015

N1MM Logger+ Update 1.0.5289.exe Version 1.0.5289 (November 3, 2015)
Spots: Corrected the assigned zone in incoming spots for IARU contests. (Coded by K3CT)
LZDX: New rules, many changes. Please test before the contest. (LZ2BE)(Coded by K3CT)
Log Window: Corrected the color coding of zone errors for IARU zone contests. (Coded by K3CT)
Multipliers: Corrected the display of expected grids when no bands were listed. (Coded by K3CT)
Logger+ Audio: Increased the read ahead wav buffer for slower computers. (N2IC)(Coded by K3CT)
When closing CW keyboard window, make sure all N1MM windows are brought to the front. (DF1LX, VE1DT) (Coded by N2IC)
Entry Window: Eliminate the unexpected leading "D" character that appeared when typing numbers while the Entry window did not have focus. (Coded by K3CT)
TS-990: Change the radio init to eliminate VFO frequency changes during program start. (KB3Z)(Coded by K3CT)
Available Window: Functionality change, a second click on the Band & Modes button will close an opened band/mode selector window. (W5GN)(Coded by K3CT)
WAE Window: Routine to process QTC Header now removes ";" when it is recieved in the header on RTTY. (Coded by N2AMG)
WAE Window: Correctly processes QTC recieved that contain ";" as seperator. (Coded by N2AMG)
WAE Window: Correctly saves the RTTY settings when pressing the Close button (Coded by N2AMG)
WAE Window: corrects Error when using {DIGQTCR} and {DIGQTCS} macro's and you had already exchange max amount of QTC with station.
MultiComputer: In multicomputer mode, populate {LastPassedFreq} per radio when a station is passed using the right click on Entry window Band Button.
This pass technique useful for multi-ops that have more than one station on each band.
It reduces the function key usage to one from as many as six when using the per computer pass and per computer message macros.
The {LastPassedFreq} macro is used to send the QSY frequency message after right clicking on the appropriate Band Button.
An example of this function key QSY message text is: QSY {LastPassedFreq} When a station is passed with this technique,
user text is added to the Info window whenever a station is passed or when {LastPassedFreq} is set.
The {LastPassedFreq} frequency is rounded to one decimal point.
If the frequency is close to an even kHz, no decimal point is sent.
When more than one station is on the passed band, the run station is selected.
If none of the stations on the passed band are in run mode, the first S&P station on the passed band with a pass frequency is selected. (Coded by K3CT)
MultiOp: When using the Band Button to pass a station, add a pass note to the current or last QSO containing the operator and passed band. The attempted pass notes can be viewed with the Entry window View, Notes selection. (N3RD)(Coded by K3CT)
Info Window: Added a Rates & Goals right click option, Only Current Band. This was added for multiops with multiple stations on the same band. Check this new option and the all networked computers option to view the combined band rate. (N3RD)(Coded by K3CT)
An AutoHotKey script can be automatically started and stopped when N1MM Logger+ is started and stopped.
Specify the name of the AutoHotKey script in the Configurer->Function Keys tab. If you put your AutoHotKey
script in your SupportFiles folder, you only need to specify the name of the script file. Alternatively,
you can put the script file anywhere on your computer and specify the full path name to the script file.
AutoHotKey scripts are very useful for keyboard remapping.
Examples can be found in http://n1mmplus.hamdocs.com/tiki-index.php?page=Third+Party+Software#AutoHotKey_-_AHK .
To use this feature, AutoHotKey must be installed on your computer. See http://ahkscript.org/download/ahk-install.exe (Coded by N2IC)
PSK Engine: the Multirx window was not being reopened correctly if it had previously been open. (Coded by N2AMG)
NE QSO: Change abbreviation DOUG to DGLS. (KB0LF)(Coded by K3CT)
UDC: continents can be used in PointsPerContact parameter. See _UDC_Help.txt file rev. R (11/01/2015) for details. (coded by NA3M) 3.74 MB 03 Nov 2015

N1MM Logger+ Update 1.0.5269.exe For each Entry Window, do not auto spot QSOs if successive QSOs are on the same frequency. This is for those who forget to set run mode when running. (K6LL) (Coded by N1MM)
Save window layouts and skins to program ini file when changing operators so that if there is a program crash, the proper ones are reloaded. (Coded by N1MM)
Fixed ESM cursor not always advancing when using Logger+ audio. (VE9AA) (Coded by N2IC)
Fixed ESM SO2R S&P while CQing on other radio when using Logger+ audio. (DL2CC) (Coded by N2IC)
Fixed Talk message run time error when unexpected message encountered. (VK2KDP) (Coded by N2IC)
Added new contest BFRRCHMIX - BFRR (Belorus) Championship, it combines CW and SSB modes (EW2A) (Coded by NA3M) 3.74 MB 29 Oct 2015

N1MM Logger+ Update 1.0.5264.exe Don't allow bearings > 359 (G0MIC) (Coded by N1MM)
Correct the bearings when the direction is due south (G0MIC) (Coded by N1MM)
For Digital operation, {PASS xx} macro operation fixed. (IW1AYD) (Coded by N2IC)
When searching for the local computer IP address, preferentially choose an IP connection in the "UP" state. (Coded by N2IC)
When "SO2R Focus Follows Spot" is selected in the Available window (right click option), do not move focus if a radio is currently sending. (Coded by N2IC)
CQWW RTTY: Generic log printing had M1 and M2 columns reversed. (WB0TEV)(Coded by K3CT)
WAE Window: CTRL-Z was not switching between recive and send correctly. This is now fixed.. (Coded by N2AMG)
WAE Window: In Rtty when pressing Send All the sequence was getting out of step while waiting for text to be printed to the rx window. (Coded by N2AMG)
Entry Window: Implemented add call to country in Tools menu (Coded by N1MM)
Rescore was not updating the country prefix if changed (Coded by N1MM) 3.73 MB 26 Oct 2015

N1MM Logger+ Update 1.0.5251.exe Available Window: Fixed flicker in Available window title bar (Coded by N2IC)
Winkey paddle interrupt now stops repeat CQ, even in between CQ's. (N4ZR) (Coded by N2IC)
Radio Control: Improve the Icom firmware out of date message. Display the firmware message everytime the radio times out. (N1MM)(Coded by K3CT)
Radio Control: Corrected a RunTime error caused by unknown radio mode. (Coded by K3CT)
Radio Control: Changed the Flex 6000 radio control to test a future improvement. (Coded by K3CT)
Radio Control: Corrected several variable and function types. Transparent to program operation. (Coded by K3CT)
Logger+ Audio: Cosmetic changes to the Monitor tab layout. (LY2KZ)(Coded by K3CT)
Available Window: When summary table bands are not stored for a new contest, make initial band selection based on hf, vhf, warc contest type. When the user changes the summary table band selection, the bands have always been saved and used when the contest is selected in the future. (Coded by K3CT)
Move Multipliers: A new window has been added to the Window menu for users that ask stations to QSY for a multiplier QSO.
The Move Multipliers window displays the multiplier status for the selected band/mode and every callsign in the spot table.
Users need to be aware of the contest rules because some contests do not allow all types of mult stations to solicit QSO's.
The display is limited by the ability to determine the multiplier status from the spot information.
The processing involved to generate the window information is demanding of computer resources.
Therefore, the display is not updated when a contact is logged, deleted, or spotted.
The spotted band/mode is displayed in the alternating color used by the Log window.
Left mouse click on the spot will QSY the radio to the first spotted band.
If the station is spotted multiple times, another click on the same line will QSY the radio to the next band spot.
If one of the radios (SO2R) or VFOs (SO2V) is on the spot band, that radio/VFO will be used.
If not, the active focus radio/VFO will be used. Shift+Left click will select the opposite radio/VFO.
A mouse wheel click deletes the line. (Coded by K3CT) 3.72 MB 13 Oct 2015

N1MM Logger+ Update 1.0.5245.exe Oceania: Fix for IsWorkable - JD1 (K3CT) (Coded by N1MM)
Fix caching of continent in all contests (Coded by N1MM) 3.73 MB 09 Oct 2015

N1MM Logger+ Update 1.0.5241.exe For CQWW CW and CQWW SSB, when creating Cabrillo, ask the user if they want a paper certificate. (Coded by N2IC)
Catch error happening during error handling (N2AMG) (Coded by N1MM)
Bandmap: Set focus to EW when window is moved (K3CT) (Coded by N1MM)
Fixed CQWW generic file export (WB0TEV) (Coded by N2IC)
Added addition debugging to catch arithmetic overflow error (VK3BY) (Coded by N2IC)
Digital: Corrects {DELTOP} from not functioning correctly (Coded by N2AMG)
Digital: If user select to use Attached RX windows and they open a window that has not been configured don't minimize that window until it has been setup. (Coded by N2AMG)
Digital: Don't attempt to load Fldigi if the path doesn't exist. (coded by N2AMG)
Digital: Adds error handling when setting up CWTNCPorts. (coded by N2AMG)
Digital:Changes the working of the {file:xxxxx} macro.
A:All the files to be sent are expected to be in the N1MM Logger+/FunctionKeyMessages folder.
B:Use only the file name ex. {File:Hi.txt}
Oceania DX: fix IsWorkable test (K3PA) (Coded by N1MM) 3.73 MB 06 Oct 2015

N1MM Logger+ Update 1.0.5232.exe Entry Window: Added "visible" but off screen label with a window id. Label will be "EntryWindow1" or "EntryWindow2". This can be used by AHK to find the window. (Coded by N1MM)
Entry Window: Fixed background color for highlighted textbox for dark color Entry Windows (AC0C) (Coded by N1MM)
Info Window: Corrected a type casting bug that may have surfaced when loading 160m goals. (Coded by K3CT)
Check ADIF import for TS & Callsign rather than just TS to prevent duplicates from being imported (VE1DT) (Coded by N1MM)
Digital: Corrects output to text file from now saving its setting in between uses. (Coded by N2AMG)
Digital Setup: Hard codes MacroType collection into form instead of loading at run time. (Coded by N2AMG) 3.74 MB 29 Sep 2015

N1MM Logger+ Update 1.0.5221.exe Automatic newexe download: expanded the time allowed to download (Coded by N1MM)
GrayLine: Window does not open on program restart. (WA2OAX)(Coded by K3CT)
Prevent duplicate timestamps in ADIF files from being imported (M0JWB) (Coded by N1MM) 3.75 MB 22 Sep 2015

N1MM Logger+ Update 1.0.5210.exe CW Sprint: Could not log a DX prefix (many) (Coded by N1MM)
Entry Window highlighting: set the foreground color properly for darker colors (K3CT) (Coded by N1MM)
QTC Window: Corrects counting of remaining QTC should stop not transmitting all QTC. (Coded by N2AMG)
QTC Window: Adds a TU Message Box to the CW Setup tab of the QTC setup window. This will be sent when exiting QTC window after exchanging QTC. Supports all N1MM Macro Substitutions. No longer will use the Entry Window F3 message. (Coded by N2AMG)
QTC Window: Adds WAETu.wav to messages that are sent when Use Voice Messages is checked. This will be sent when exiting QTc Window aftr exchanging QTC. (Coded by N2AMG)
QTC Window: Moves most of the QTC Settings to the Setup window within the QTC Window. CW, SSB, RTTY. (Coded by N2AMG)
QTC Window: Provides a menu on the Entry Window to access the QTC Setup window. Config/WAE/Open QTC Window Setup (Coded by N2AMG)
QTC Window: On SSB Setup tab provides location to where wav files should be located and a means to Play and Record the wav files. (This will only work if Use Logger + Audio is selected.) (Coded by N2AMG)
Updates Fldigi Fldg.dll file (Coded by W1TR)
Com/LPT Configuration dialog: was not using proper skin colors (LY5T) (Coded by N1MM)
If user was mistakenly using Do_Not_Use_Or_Erase.s3db as their database, make the user change the name. (Coded by N2IC) 3.73 MB 20 Sep 2015

N1MM Logger+ Update 1.0.5176.exe Bandmap: With Windows 10, if you specify "Scroll inactive windows when I hover over them," mouse scrolling in the bandmap will not work. With this fix it will work if you first click in the bandmap (not on a spot) and leave the mouse in that window while you scroll. (N3RD) (Coded by N1MM)
Telnet: Changing the background to red only if autoconnect is enabled. If Telnet server never sends a response to keep-alives (i.e. RCKSkimmer), user should disable auto-login (AB1J, N4ZR) (Coded by KU7T)
CWOpen: Correct the start of contest day. If the contest is started within three hours of the session start, the start time should be correct. (Coded by K3CT)
CW Ops CWT: If the contest is started within three hours of the session start, the start time should be correct. (Coded by K3CT)
Bandmap: would grab focus if mouse was moved into the window (W7ZRC) (Coded by N1MM) 3.72 MB 15 Sep 2015

N1MM Logger+ Update 1.0.5165.exe Improved operation of Grab Focus. Works for most windows now except new MS Edge browser (W1UE) (Coded by N1MM, K3CT)
OPON: was not returning focus to the correct control (K3CT) (Coded by N1MM)
RUSDXRTTY contest: DXCC and WAE countries list was used to count multipliers (it should only use DXCC) (DJ3IW) (coded by NA3M)
RUSDXRTTY contest: Cabrillo name of the contest changed to RADIO-WW-RTTY (Russian "Radio" magazine is contest organizer) (DJ3IW) (coded by NA3M)
AA and other non WAE contests. Identify continent for Turkish stations properly (many) (Coded by N1MM)
QTC Window: QTC Window.Windowstate is now set to 0 on startup. (Coded by N2AMG)
QTC Window: When pressing Hdr Agn the focus would sometimes switch to the Entry Window. (Coded by N2AMG)
QTC Window: If the mouse was moved over either bandmap when the QTC Window was open Focus would switch to the Entry Window and not return to the QTC Window. (Coded by N2AMG)
QTC Window: in SSB Mode double digits were not being accepted into the header window. (Coded by N2AMG)
QTC Window: Pressing Space cycles between QTC fields on a row and buttons on the current row. Enter on the Agn Button or CFM button triggers that button. (Coded by N2AMG)
Arrow keys (Left & Right) in each QTC Window will move thru characters in that window.
QTC Window: When moving between QTC fields with Space, No longer highlights text of the field that focus moved to. (Coded by N2AMG)
QTC Window: Moved RTTY setup to setup window in QTC window from the Digital setup Window. (Coded by N2AMG) 3.71 MB 08 Sep 2015

N1MM Logger+ Update 1.0.5156.exe This experimental version has a fix for RUSDXRTTY contest - only DXCC countries counted as multipliers (Tnx DJ3IW). 3.70 MB 05 Sep 2015

N1MM Logger+ Update 1.0.5156.exe Info Window: Added right-click option to show QSO timers. Default is ON. (Coded by N2IC)
Colorado QSO Party: Updated with new start time and bonus points. Mobile (i.e. rover) scoring is not correct. (Coded by N2IC)
Info Window: Reduce the Cumulative Off Time calculation time. (Coded by N1MM)
Function Key Messages: Fixed a runtime error that occurred when the station callsign associated file was deleted. (IW1AYD)(Coded by K3CT)
Fix for focus issue when tuning radio (W1UE) (Coded by N1MM)
Radio Control: Improvements to the FTDX5000 SO2V operation. Testing by G3RIR, Tnx. (G3RIR)(Coded by K3CT)
Radio Control: IC-7600, IC-7800, IC-7850/51 radios. Add a dummy active frequency polling instruction for external devices or software that has not been updated to use the new Icom single VFO commands. This does not eliminate the need to update the radio to the latest Icom firmware. (Coded by K3CT)
Patched more cracks that allowed "Do_Not_Use_Or_Erase.s3db" to be used. (K7RI) (Coded by N2IC)
Return focus to the Entry Window after changing operator (K0RC) (Coded by N1MM)
PA QSO Party: Change of bonus station. (Coded by K3CT)
Foot Switch: the fix "protection from PTT reversal" was causing "You cannot run two instances of N1MM Logger+ at the same time." message (K9CT, 9A3OS) (coded by NA3M) 3.71 MB 02 Sep 2015

N1MM Logger+ Update 1.0.5139.exe Entry Window: Fix for check mark highlighting. (VE1DT) (Coded by N1MM)
Manage Skins: Allow selection of Entry Window highlighting color. (N2IC) (Coded by N1MM)
Info Window: Added a timer displaying time since last logged QSO or off time. Right click on the timer for the display options. (Coded by K3CT)
Edit log: catch bad QSO timestamp and display error message. (OH3NAO) (Coded by N1MM)
Icom Radio Control: Corrected a runtime error introduced in version 1.0.5053 that occurred during a CI-V collision.(DJ3IW)(Coded by K3CT)
CQWW: Changed minimum off time from 30 to 60 minutes per CQWW rules (VE3KI) (Coded by N1MM)
OH QSO Party: Sponsor's robot rejects multi-computer Cabrillo logs that include transmitter number on QSO line.(Coded by K3CT)
WAG & XMAS Contests: Correct a coding error in determining a DOK member. (NA3M)(Coded by K3CT)
Avoid highlighting a textbox in window when mouse crosses bandmap (Coded by N1MM)
Prevent new highlighting from applying to windows other than Entry Window (K3CT) (Coded by N1MM)
WAE CW: Fix problem with received QTC ending "TU" not being sent. (Coded by N2IC, N2AMG)
FootSwitch: Removed 150 ms delay, added protection from PTT reversal (Coded by NA3M)
LZOPEN, LZField Contests: The {LASTEXCH} macro returned the wrong string when the log did not contain any QSO's and the # macro was used. (W1UE)(Coded by K3CT) 3.71 MB 25 Aug 2015

N1MM Logger+ Update 1.0.5108.exe Fixed SendInfo and SendInfo2 accidental code overwrites.
Entry Window: Changed highlighting of textboxes (Coded by N1MM) 3.70 MB 19 Aug 2015

N1MM Logger+ Update 1.0.5103.exe Radio Control: Correct error message, distinguish between lack of radio communication and Icom firmware requiring an update. (Coded by K3CT)
SARTGRTTY: Reverse the Score Window column titles. (CN8KD)(Coded by K3CT)
ADIF: Reverse the change made to the Comment field in 1.0.5095, issues with other contests that contain comment text. (NA3M)(Coded by K3CT)
Function Key: Added non-intrusive message box indicators when the program code creates a function key file for an operator or when an associated file is missing. (N2IC)(Coded by K3CT)
Flex Radio: Eliminate a Win10 runtime when using Logger+ audio. (Coded by K3CT) 3.71 MB 18 Aug 2015

N1MM Logger+ Update 1.0.5095.exe Fixed another RTE. (Coded by N2IC)
Added more debugging in XMLDescription when it fails (DF1LX) (Coded by N2IC)
Fixed RTE in SendInfo. (WB5EIN) (Coded by N2IC)
Networked Computers fix: check box "Block my Tx only if other station transmitting on the same band and mode (Multi-One)" did not work (coded by NA3M)
Fixed NAQP M/2 Cabrillo output. (N1LN) (Coded by N2IC)
For NAQP, when DX is worked, fill in "DX" in the logged exchange and Cabrillo output. (N5KO) (Coded by N2IC)
WAE: Sped up counting of available QTCs that is done when typing a call (ON5ZO) (Coded by N2IC, N1MM)
EUHFC: when trying to export/import ADIF the exchange (Year) is lost (UR0MC) (coded by NA3M)
UDC: for UDC only - 6 digits (or more) exchange is allowed (JE1CKA) (coded by NA3M)
WAE: Ctl-Z for non-EU - improved query time for collecting available QTCs to send by 30x by adding an index (coded by N1MM)
WAE: If Again button is disabled re-enable it when opening the QTC window (Coded by N2AMG)
WAE: In CW RQTC mode pressing SHIFT+1, SHIFT+2, SHIFT+3 will ask for repeat of that exchange element of the QTC. (Coded by N2AMG)
Config Mute MIC: Added code to reset the radio MIC level when the SSB Function Key message file could not be found. (Coded by K3CT)
SO2R: Prevent both radios from being set to the same band using the direct frequency entry method. (W2GN) (Coded by K3CT)
Function Keys: Added an option to enable function key message files per operator. This is an option used for all operators. The default is unchecked (disabled). The operation is defined below.(Coded by NA3M & K3CT)

When the per operator function key message option is Disabled:
- The associated function key message files will be used for all operators.
- Any operator can modify the associated function key message files.
- If a associated function key message file can not be found, the Default message file is used to create the file.

When the per operator function key message option is Enabled:
- If the Station callsign is the same as the Operator callsign, the associated function key message files are selected. This means that only the Station callsign operator can edit the base files (the associated function key message files). These base files are used when a different operator logs on.
- If the Station callsign and the Operator callsigns are different, the current associated function key message files are copied into an operator directory during the first OpOn or Ctrl+C. The operator directory files are then loaded. For this reason, verify that the associated function key message files are correct prior to logging on as another operator.
- It is not necessary to create the operator directories. The program code will create the necessary sub-directories and the operator directory when needed. The operator directory resides in the same directory as the Station callsign associated function key message files.
- If you want to reset and delete the operator directories, uncheck (disable) the Per operator function key message option first.
- If the associated function key message file created by the Station callsign can not be found, the Default message file is used to create the file. 3.71 MB 12 Aug 2015

N1MM Logger+ Update 1.0.5061.exe WAE: Adjusted window size and controls for correct layout with 125% and 150% dpi settings (Coded by N2AMG)
CWReader: With the setup window open and clicking cancel the Align button would disappear. Now corrected. (Coded by n2AMG)
Digital Setup Window: If macro set was not loaded when importing macro file would cause Invalid Selectedindex for dropdown control. Added else command to bypass if setname not set. (Coded by N2AMG)
Digital: Adds {CLRTX} macro to clear the TX field in the digital window. (Coded by N2AMG)
Networked computers: "Force All Other Stations to stop Transmitting..." logic fixed. (W2FU) (Coded by N2IC)
Networked computers: Added "Disable All Transmit Interlocks". (W2FU) (Coded by N2IC)
MD QSO Party: Run time bug fix, changed county abbreviation from BCO to BCT, and changed bonus station callsign. Allow BCO to be entered, map to BCT. (K0BAK)(Coded by K3CT)
Flex 6000 Series: Added RTTY mode, default digital wide filter 400Hz, and default digital narrow filter 300Hz. Released in advance of the SDR software that enables this mode. (K5KDN)(Coded by K3CT) 3.73 MB 04 Aug 2015

N1MM Logger+ Update 1.0.5053.exe 10M RTTY: Added a 10 Meter RTTY contest to eliminate user confusion over the use of ARRL RTTY Roundup contest selection. (K8UT) (Coded by K3CT)
Computer Networking: Disable the Ctrl+E keystroke when the computer network is not active. Add an EntryWindow menu item for the Talk window in the Window menu. (Coded by K3CT)
Changed runtime error dialog to user-interpretable error for malformed or non-database errors. (Coded by N1MM)
Flex 6000: Radio control improvements. (Coded by K3CT)
IC-7600: Control the radio with the new firmware commands. Requires the IC-7600 firmware 2.00 or newer. (Coded by K3CT)
IC-7800, IC7850, IC7851: Control the radio with the new firmware commands. Requires the latest firmware. (Coded by K3CT)
IC-7100: Added LSB-D & USB-D control. They are mapped to AFSK and AFSK-R. The radio codec can now be used for voice and digital modes. (N1EN) (Coded by K3CT)
Radio Control: Added Run mode RIT control for the following radios: FT-Dx9000, FT-Dx3000, FT-Dx1200, FT-950. (PA5WT)(Coded by K3CT) 3.75 MB 28 Jul 2015

N1MM Logger+ Update 1.0.5049.exe When using the CW window to send CW, pressing Enter will close the window, but any in-progress CW message will complete. (Coded by N2IC)
When using SO2R and the CW window, and transmit and receive focus are split, the sent CW will move to the receive window (red dot "chases" the green dot).
This makes CW window operation consistent with F-key operation. (Coded by N2IC)
Digital: When SO2R lockout was set to Last One Wins if DI1 was transmitting and Right click was done to DI2 Xmit would not start in DI2 only cancel DI1's xmit. This is now corrected. (Coded by N2AMG)
Digital: When Dueling CQ is turned on When pressing ESC or entering call in EW cancels out Dueling CQ and turns it off. (Coded by N2AMG)
Change allowed callsign length in Log window from 10 to 15 (K1TTT) (Coded by N1MM)
Fixed WAE CW ctrl-z operation when using autosend threshold. (K5WA) (Coded by N2IC)
WAE Window: Fixed issue of moving focus to Exit after resending of a QTC. (N2IC) (Coded by N2AMG) 3.72 MB 24 Jul 2015

N1MM Logger+ Update 1.0.5041.exe Station Spot: Increased the frequency tolerance when displaying incoming spot messages in the Info window for your station. (Coded by K3CT)
RRTC contest: sent exchange (ITU zone) in Cabrillo file was always "00" (ON5ZO) (coded by NA3M)
UDC: new value "Last2L" added to /DefaultContestExchange/ parameter to allow sending last 2 letters of the callsign from previous QSO as exchange (HA2VR) (coded by NA3M)
If focus is in the Telnet window, forward ESC to EntryWindow for processing (many) (Coded by N1MM)
If focus is in the Log window, forward ESC to EntryWindow for processing (many) (Coded by N1MM) 3.73 MB 20 Jul 2015

N1MM Logger+ Update 1.0.5035.exe Restored code signing for installer and program (KU7T) (Coded by N1MM) 3.72 MB 16 Jul 2015

N1MM Logger+ Update 1.0.5033.exe Log: was not returning focus to Entry Window when editing cells (VE3CX) (Coded by N1MM)
Fix runtime error in load of Telnet window (AI9T) (Coded by N1MM)
Remove nag message about real time score reporting if real time score reporting not enabled (Coded by N2IC)
Program Start: Load the Goal and Call History associated files on every program start. If the Call History file is greater than 500kB the user will be given the option to bypass the loading of the Call History. (N2IC)(Coded by K3CT)
Digital: Corrects Fldigi from freezing when loading. You will notice some window activity as it loads before it finishes loading. (Coded by N2AMG)
CW Reader: Adds means of setting which way the alignment frequency is calculated. (Coded by N2AMG)
IARU ADIF: Do not export the CQZ field. (K3WYC) (Coded by K3CT)
Digital: Changes way text is outputted when output rx text to text file is selected.. (Coded by N2AMG)
When "Always use packet spot mode" is checked (Coded by N1MM):

+ Only change modes if the mode is allowed in the contest's mode category. + Using ctl-up/down, only stop at a spot if the spot's mode is allowed in the contest's mode category. + For now, open/close the DI when mode changes to digi + (Someday) allow the DI to remain open in CW & SSB and have a different method of determining that the contact mode is RTTY or PSK. 3.71 MB 14 Jul 2015 1446

N1MM Logger+ Update 1.0.5021.exe Start up errors in Info Window fixed. (K4LM) (Coded by N2IC)
Digital - Corrects Align Frequency calculation when using Fldigi. (Coded by N2AMG)
Digital - Adds Align Button to CW Reader window when using Fldigi. (Coded by N2AMG)
Digital - When saving settings digital windows were not resizing correctly. (Coded by N2AMG)
Digital - Corrects underlined text from not showing correctly after using the font resizer and using non-scrolling windows (Coded by N2AMG)
Digital - Corrects underlined text in Non-Scroling window from showing Bold and no Bold correctly. (Coded by N2AMG)
Digital - Re-writes PSK Soundcard selection and setting code. Eleminates Atuo-Detect and Same as input settings that caused errors on some systems.
Will need to reset soundcard settings if you use MMVARI. (Coded by N2AMG)
Message Recording: Macros in SSB function keys interfere with on the fly recording. Preserve the {Operator} macro and remove all other macros before recording. (K1TTT)(Coded by K3CT)
Message Recording: If more then on wav file names appear in a SSB function key macro separated by a comma, store the recording in the first wav file. (Coded by K3CT)
IOTA: Runtime error when Multipliers, Section/States window is opened. The Section/States window displays IOTA worked and spotted. (G3KLH)(Coded by K3CT)
Talk Window: The window state now restores on Operator change. (Coded by K3CT)
Talk Window: Added more info to the notifier and allow user to click on notifier to restore Talk window. (Coded by N1MM)
Radio Control: Added IC-7850 & IC-7851 radio codec control. (Coded by K3CT)
Bandmap: The RIT & XIT indicators were not displayed for some radios. (Coded by K3CT)
ADIF Import: Corrected the AACW ADIF Age field import. (JE1CKA)(Coded by K3CT)
Runtime: Eliminated a runtime error during operator change. (N6XI)(Coded by K3CT)
Radio Control: Flex series 6000 changes. Fixed RIT operation, polling changes, and filter changes. (Coded by K3CT) 3.73 MB 30 Jun 2015

N1MM Logger+ Update 1.0.5013.exe Remove errant status lines in EntryWindow at startup. (9A3OS) (Coded by N2IC)
Stop hiding errors during startup (N2IC) (Coded by N1MM)
Remove Status column from Network Status window (N4ZR) (Coded by N1MM)
Enhanced the network Talk window. There are now separate panes for sent and received talk messages. Ctrl-e now toggles between opening and minimizing the Talk window. (W1TR) (Coded by N2IC)
If a new talk message is received and the Talk window is minimized, the user is alerted in the Windows notification pane. (W1TR) (Coded by N2IC)
When the computer has multiple NIC's, the first local IP address found that is a non-routable IP address (i.e. 192.168.x.x) is preferentially chosen. (Coded by N2IC)
Help Menu: Updated the URL links used in the Entry Window Help menu. (K2PO)(Coded by K3CT)
Fixed EntryWindow focus and Task bar issue on start (VE3KI, G0IBN) (Coded by KU7T)
Fixed ArgumentOutOfRangeException in Call history load (JA1BJI) (Coded by KU7T)
Removed M/2 warning on startup if networked mode is already on. (9A3OS) (Coded by N2IC)
Enable Run1/Run2 buttons on Network Status->Options tab for M/2. (9A3OS) (Coded by N2IC)
When M/1 or M/2 and changing the contest in "Open Log", only prompt the user once. (9A3OS) (Coded by N2IC)
Fix program lockup when user decides not to exit the program. (NW0M) (Coded by N2IC)
When using autosend and SO2R, put cursor in correct position in callsign. (S51TA) (Coded by N2IC) 3.73 MB 24 Jun 2015 6428

N1MM Logger+ Update 1.0.4998.exe Allow user to enter any URL for the realtime score reporting server. (K6TU) (Coded by N2IC)
Multiplier Grid Square Map: Performance improvements, experienced delay when sending CW. (W1TR) (Coded by N1MM & K3CT)
Bug fixed: when ARR_RTTY contest is selected ARRLRTTY gets loaded instead (G4OGB) (Coded by NA3M)
New Operator: If a skin, font, or layout files do not exist for a new operator, use the existing user's settings. Fixed a bug that prevented a window from not closing on operator change. (N6XI) (Coded by K3CT)
Gray Line: Fixed a bug in the Gray Line window layout saving. Because of this, the Gray Line window state and location may change to default for each operator. (N6XI) (Coded by K3CT) 3.73 MB 17 Jun 2015

N1MM Logger+ Update 1.0.4991.exe DRCG WW RTTY and Portugal Day contests: BARTG.sec and CT.sec files added to Resources and SupportFiles folder (coded by NA3M)
Info Window: Fixed a window title text runtime error. (Coded by K3CT) 3.71 MB 11 Jun 2015

N1MM Logger+ Update 1.0.4988.exe Fixing issue with date parsing as part of version check (K3CT, OH3WW) (Coded by KU7T)
Networking: Reverting "localhost" change from 1.0.4977. Showing again IP address for local station (N2IC) (Coded by KU7T) \ 3.72 MB 10 Jun 2015

N1MM Logger+ Update 1.0.4985.exe Change algorithm for automatically backing up Admin database. (Coded by N2IC)
Fixed rotor offset. It is now sticky. (W7ZR) (Coded by N2IC)
New Operator: If a skin, font, and layout files do not exist for a new operator, use the existing user's settings. Fixed a bug that prevented a window from not closing on operator change. (N6XI) (Coded by K3CT)
UDC: corrected bug introduced with last performance change, some UDCs did not count points (G4OGB) (coded by NA3M)
Several contest classes were using low case in DXCC country names (like GM/s) while database files store upper case only names (GM/S) (coded by NA3M)
INI files: Excluding some files (skins, UDCs, etc.) from automatic INI file backup (G4OGB, K3CT) (Coded by KU7T) 3.71 MB 09 Jun 2015

N1MM Logger+ Update 1.0.4977.exe Available Window: Added grid square column. Allows finding and working a rarer grid before working easier grids in the same direction. (K3TUF) (Coded by K3CT)
Info Window: Improved the code that formats the Info window title text. Display the sent serial number when the Sent Exchange box contains "001" or "#". (Coded by K3CT)
RBN dupe spot handling: Increasing dupe spot timeout to 120 s, Bandmap and Available window (time sorting) are less "noisy" (K1TTT) (Coded by KU7T)
Any dupe spot handling: increasing dupe spot frequency range to +- 260 Hz, Bandmap and Available window (time sorting) are less "noisy". (K1TTT) (Coded by KU7T)
Networking: Showing "localhost" instead of an IP address for the local station as it can be misleading or wrong if multiple network adapters are active (Coded by KU7T)
INI files: Create a backup on program startup for manual recovery (one file per day of week, if it does not exist or is old). (Coded by KU7T) 3.72 MB 07 Jun 2015

N1MM Logger+ Update 1.0.4969.exe Fixed {CTRLFx} not working correctly for CQ Key when "Do Not Automatically Switch Run on CQ Frequency" is selected. (W4NZ) (Coded by N2IC)
Telnet: Additional improvements made in the telnet comment parsing of grid square. Accommodates the CC Cluster format of adding the grid square before the time. (Coded by K3CT)
Entry Window: When operating a contest that combines RTTY & PSK into one digital mode, the Band Panel button does not track the band when a digital mode is selected. (IU3AZC)(Coded by K3CT)
SO2R: When repeat CQ is active, do not move receive focus to CQing radio if there is a callsign in the non-CQing radio. (K2PO) (Coded by N2IC)
Updated Master.scp to version VER20150603 (used only in fresh installations) (Coded by KU7T)
Updated wl_cty.dat to version CTY-2507 – 29 May 2015 (used only in fresh installations) (Coded by KU7T)
Removed detection and notification of disappearing COM ports. It proved to be of limited value and can cause latency. (W3GVX) (Coded by N2IC) 3.71 MB 05 Jun 2015

N1MM Logger+ Update 1.0.4958.exe Multiplier Window: Added right click menu item for grid square displays to show beam heading. (Coded by K3CT)
Multiplier Window: Fixed the right click Turn Antenna menu option for grid square multiplier windows. (Coded by K3CT)
Do not show error dialog if program version is more than 30 days old. Tell user to upgrade before reporting. (Coded by N1MM)
Serial Number Exchange: Allow the sent exchange "001" or "#" to be used to send serial numbers in function keys or the Sent Exchange dialog. Change all serial number contest default exchanges from "001" to "#". (Coded by K3CT)
Info Window: Improve the formatting of the serial number in the title bar. (Coded by K3CT)
JADomestic contest: do not log QSO without exchange, JA.sec added to Resources and SupportFiles folder (JE1CKA) (coded by NA3M)
JADomestic, JIDX, APSCW, APSSSB contests: JD1 were counted as DX and could not be logged. (JE1CKA) (coded by NA3M)
Radio Control: Added IC-7850 and IC-7851 radios. (W4QN) (Coded by K3CT)
Telnet: The 70mHz band checkmark was not stored. (PA2C) (Coded by K3CT)
Improve editing of numeric data in callsign textbox (N2IC) (Coded by N1MM)
UDC performance improvment: Execute ComputePoints() only once when Space is pressed (PA1M) (coded by NA3M)
Telnet: Improve the telnet comment parsing of grid square. (Coded by K3CT)
Entry Window: In SO2R when TX and RX focus are on different radios and the RX focus radio band is changed, the Band Panel button is not updated. (K5KDN)(Coded by K3CT)

N1MM Logger+ Update 1.0.4946.exe
RussianDX contest: WAE multipliers were not counted (9A3OS) (coded by NA3M)
EUPSKDX: updated EUAREACDS.sec file, increased max number of sections for Multipliers window to 8000, only show worked EU Area Codes in Multiplier window (coded by NA3M)
Telnet: Removed the debug code from the previous version that displayed grid square information in the Info window. It was added in the previous version. (W4TTM)(Coded by K3CT)
SC QSO Party: Rules changes. The bonus stations will operate from multiple counties. Log the contact with the callsign send by the bonus station. The bonus station code will count contacts using base callsign. (WN4AFP)(Coded by K3CT)
Multiplier: Properly dispose of the Grid Square Map event handlers. (Coded by K3CT & KU7T)
Multiplier: Do not add spotted callsigns to the Grid Square map if the callsign ends in /B. (Coded by K3CT)
Multiplier: Correctly display all calls worked and spotted with six character grid squares when using the right click Show Calls Worked option. (Coded by K3CT)
Multiplier: Fixed the left click on grid square map when the callsign was spotted with six character grid square. (Coded by K3CT) 3.99 MB 28 May 2015

N1MM Logger+ Update 1.0.4939.exe
KingEA contest: DX and EA Mults were not properly marked, CallHist. was not used to mark Mults in the BandPlan window, section file cncw.sec was not available in SupportFiles folder. (LY5T) (Coded by NA3M)
UNDX contest: start/end of contest was changed, section file KDAC.sec was not available in SupportFiles folder. (Coded by NA3M)
N1MM Rotor: The entered beam heading no longer changes to 0 when N1MM Logger is running. (Coded by N2IC)
Fixed Alt-J not turning rotor when rotor has a numeric description in the Antennas tab (i.e. "15") (Coded by N2IC)
EDI Export: Remove the Band: line. Sponsor wouldn't accept the log with this line.(HA2VR)(Coded by K3CT)
BC QSO Party: Changes to the District abbreviations. (VA7BEC)(Coded by K3CT)
UKEIDX contest (UKEIDXCW, UKEIDXSSB): bug fixed - QsoNumbersByBand was incorrectly set to True (GM3POI, G4OGB) (coded by NA3M)
Multiplier: The grid square multiplier window was not displaying the imported expected multipliers. (K3CT) (Coded by N1MM)
SO2R: Fixed another bug in FocusOtherAlwaysSwap (OK2ZI) (Coded by N2IC)
Multiplier: Added a new multiplier window option, Grid Square Map. This window option needs additional testing. (Coded by K3CT & N1MM)
EUEPCDX contest: QSO with EU station was missing EU Area Code in the log if that Area Code was "unknown" to the logger (not in EUAREACDS.sec file), no EU Area Code in Cabrillo file for this QSO. Added EUAREACDS.sec into SupportFiles folder (PD7RB, G4OGB) (coded by NA3M) 3.98 MB 26 May 2015

N1MM Logger+ Update 1.0.4905.exe
Check for new contacts on a reconnecting machine (many) (Coded by N1MM)
Digital: Corrects Object not set RT Error when switching from another interface engine to Fldigi. (Coded by N2AMG)
OH QSO Party: Rules changes. No serial number, add RST. (K8MR)(Coded by K3CT)
Icom Radio Control: For the IC-7600 added RIT polling, {ClearRit} macro, and standard RIT support. Requires Rev 2.0 or later firmware. IC-7800, added {ClearRit} macro. (Coded by K3CT) 3.99 MB 20 May 2015

N1MM Logger+ Update 1.0.4900.exe
New UKEIDX contest added (UKEIDXCW, UKEIDXSSB). For G and EI stations exchange should be one word like "001AB" (GM3POI, G4OGB) (coded by NA3M)
Digital: Corrects object not found error when using Fldigi as a CWReader. (Coded by N2AMG)
Changes to N1MMPortManager. (9A3OS) (Coded by N2IC) 3.97 MB 18 May 2015

N1MM Logger+ Update 1.0.4896.exe
Digital: When using Fldigi in an RX Window Adds Rev button on form to control Fldigi Rev off and on. (Coded by N2AMG)
Digital: Corrects Fldigi not printing text in attached RX window. (Coded by N2AMG)
Digital: Corrects issue where calls ending in Z were not clickable. (Coded by N2AMG) 3.97 MB 12 May 2015

N1MM Logger+ Update 1.0.4893.exe
Talk window: ctrl-e now toggles the talk window open or closed. (N3RD) (Coded by N2IC)
Rotor: Handle Alfaspid rotor position reports split across multiple messages. (9A3TY) (Coded by N2IC)
UDC feature: added /BonusPoints/ = IsMult1(2,3), n to give bonus points for multipliers, see updated Help.txt file in User Defined Contests gallery (PA1M) (Coded by NA3M)
Fixed bug in FocusOtherAlwaysSwap when in Run mode. (Coded by N2IC)
QSO Party: Changed GA QSO party to Cabrillo 3.0 for next year to support a contest rules option not available in Cabrillo 2.0. (Coded by K3CT)
Volta RTTY: Corrected the user's station zone on QSO line output. (KB7N)(Coded by K3CT)
Network window: disable Talk, Force Time Sync and Reset Serial Numbers when network is disabled (YO2MBU) (Coded by N1MM)
Radio Control: Added the Flex-6000. (Coded by K3CT)
QSO Party: Changed GA QSO Party to Cabrillo 3.0 for next year. (Coded by K3CT) 3.97 MB 10 May 2015

N1MM Logger+ Update 1.0.4883.exe
QSO Party: In-State users, fixed a runtime error that occurred during contest 7QP rescore. (AD7KG)(Coded by K3CT)
ADIF Import: Fix the reported issues with ADIF import of 7QP, NEWE, IN7QPNE contests. (Coded by K3CT)
7QP QSO Party: Corrected the counting of DX multipliers. (K6LL)(Coded by K3CT) 3.96 MB 04 May 2015

N1MM Logger+ Update 1.0.4880.exe
Always set focus to EW text fields after pressing Log button (N1MM)
ARIDX - fixed bug in Cabrillo (missing Italian sections), switched to Cabrillo ver. 3 (VE2FK) (coded by NA3M)
3.97 MB 03 May 2015

N1MM Logger+ Update 1.0.4876.exe
Bug fixed: if there are no at least one UDC file in the UserDefinedContests folder - red warning msg about band change limit pops up in EW (W1RM) (coded by NA3M)
Ignore log it button when in quick edit (N4ZR) (Coded by N1MM)
Digital: Corrects not being able to click on a call with a Z in it or clicking on an exchange element of Z. (Coded by N2AMG)
Logger+ Audio: Improve AutoSend operation in phone modes. (Coded by K3CT)
Logger+ Audio: When voicing callsigns, additions or changes made to the callsign will be played. The F5 function key message should be !. The user needs .wav files: a-z, 0-9, query.wav, point.wav, and stroke.wav stored in the Wav\LettersFiles\{OPERATOR} directory. Set Config, Other tab, DVK Letters File Path to: {OPERATOR}\ (Coded by K3CT)
Logger+ Audio: Added "Send Corrected Call" and "Send Partial Call" functionality to phone modes. Corrected callsigns will be sent as a full or partial call depending on the user Config option. For this to function, the HisCall function key needs to contain ! and the program needs to be in Run mode. (Coded by K3CT)
Logger+ Audio: When voicing callsigns, if the Entry window callsign exists as a callsign.wav or a leading character group fragment (two or more characters/numbers) in either the "Wav\{Operator}\" or "Wav\LettersFiles\{OPERATOR}" directories, play the recorded fragment or full callsign file instead of parsing the callsign into letters and numbers. If any unvoiced remaining characters exist, they will be voiced as individual letter wav files. (Coded by K3CT)
Logger+ Audio: Improved the shutdown of the audio player when an error is generated (missing file, unavailable soundcard, etc.). (Coded by K3CT)
Function Key Messages: Eliminated the truncation of wav messages that occurred when the text exceeded 1024 characters. This was possible when playing multiple wav files with long directory paths. (Coded by K3CT)
Function Key Messages: When importing function key message text the string "Empty.Wav" is converted to a space. Change the import code to allow any form of mixed-case. (Coded by K3CT)
CW String Substitution: Moved the test for excessive CW message length to the end of the string substitution routine and test for CW-R mode. Output a Entry window status message when the length is exceeded. (Coded by K3CT)
A special thanks to K5WA for testing the Logger+ Audio changes during the last two weeks of development.
Eliminated the AFTER MACRO EXPANSION limit on CW message size. Did not change the db storage limit (N1MM) 3.97 MB 28 Apr 2015

N1MM Logger+ Update 1.0.4870.exe
GCup (Gagarin Cup) and some UDC contests: in ESM mode changed exchange value was not saved in the log (RA3TT) (coded by NA3M)
CWReader: Corrects issue where Fldigi was closing shortly after opening. (Coded by N2AMG)
CWReader: When using CWGet the program looks for the CWGET.INI file in first the directory where CWGet is loaded from then from
the C:\ProgramData folder. And copies the file to the N1MM+ working folder so it can be used with out Admin Privs. (Coded by N2AMG)
RFCHAMP (Championship of Russia): in the Cabrillo file sent zone will be set to the zone value from default sent exchange field (RX4W/3) (coded by NA3M)
Fix for window display before EW loaded (W3FA) (Coded by N1MM)
UKRCUPLP (Ukrainian Cup LP) contest: time periods were changed from 2 to 1 hour (UX1IL) (coded by MA3M)
Telnet: Eliminated a spot processing runtime. (N4DW)(Coded by K3CT)
UDC: new value 2LPREFIX was added for parameter /MultSqlString/, see updated Help.txt file for details (PA1M) (coded by NA3M)
Fix for Log window RTE setting splitter (AB1VL) (Coded by N1MM)
UDC: new values (/P, /A, /M, /AM, /MM, /QRP) were added for parameter /PointsPerContact/, see updated Help.txt file for details (PA1M) (coded by NA3M)
UDC: new parameter /BandChangesPerPeriod/ implemented, see updated Help.txt file for details (NG3G) (coded by NA3M) 3.96 MB 24 Apr 2015

N1MM Logger+ Update 1.0.4857.exe
Changed operation of FocusOtherAlwaysSwap. Sending a CQ will always move focus to other radio. (OK2ZI) (Coded by N2IC)
LZOPEN: Changes to the text that appears in the Info window status line.(LZ2BE)(Coded by K3CT)
Logger+ Audio: Improved the radio codec operation and PTT when playing multiple wav files. (Coded by K3CT)
Michigan QSO Party: For MI stations, the first DX station worked counts as a mult. (N8FYL) (Coded by N2IC)
Fixed Multipliers window reset in the beginning of every time period for UKRCHAMP and other contests (UR5MID) (coded by NA3M) 3.96 MB 16 Apr 2015

N1MM Logger+ Update 1.0.4851.exe
If Windows detects duplicate COM ports, warn the user. (Coded by N2IC)
GCup (Gagarin Cup) contest: ver. 4840 did not work when run out of the IDE, additional fix was applied (coded by NA3M)
Digital: Corrects issue of not saving settings correctly when using multiple Gritty windows. (Coded by N2AMG)
Digital: Places Gritty config files in the Afreet AppData folder so Gritty can now be run from the Program Files directory. (Coded by N2AMG)
JIDX contest: default exchange for non-JA stations was set to "001" instead of CQ zone (DH8BQA) (coded by NA3M)
Logger+ Audio: Store the initial soundcard(s) output and Mic level(s) and restore on program exit. Remove the Never Change Levels option.(Coded by K3CT)
Logger+ Audio: Add option for SO2R mono. (W4TV/N2IC)(Coded by K3CT)
Logger+ Audio: Two soundcard selection, when recording wave files with Radio2 the Mic2 level was not saved or used. (Coded by K3CT)
Logger+ Audio: Added an option to zero the Mic level during playback on the message recording tab. (K1TTT,K3TUF)(Coded by K3CT)
LZOPEN: Bug fixes for three LZOPEN contests.(LZ2BE)(Coded by K3CT)
LZOPEN: Only display Info window information for the callsigns that are entered into the Entry window. (LZ2BE)(Coded by K3CT)
Old Software Version: Some users are reporting bugs in software that is four months old. Added a startup message when the program version is greater than 30 days old. (Coded by K3CT)
Entry Window: Removed the status line display of internal CW computer timing correction. (Coded by K3CT)
CQMMDX: Rules changed, club/groups add "C" instead of the previous "G". (PY8AZT)(Coded by K3CT)
EDI Export: Added database field Exchange1 to EDI export. (G4FRE)(Coded by K3CT)
3.95 MB 14 Apr 2015

N1MM Logger+ Update 1.0.4840.exe
GCup (Gagarin Cup) contest: incorrect zone detected for VE and some other countries was fixed, cty-CQM.dat updated (VE2FK) (Coded by NA3M)
Improved Repeat CQ handling for SSB operation. This change undoes the change in 4827, and has absolutely no effect on CW or Digital Repeat CQ operation. (N3RD, OK2ZI) (Coded by N2IC)
Telnet: Eliminated a spot processing runtime. (N4DW)(Coded by K3CT) 3.95 MB 10 Apr 2015

N1MM Logger+ Update 1.0.4834.exe
Logger+ Audio: DLL change, bug fixes. The Version 1.0.4827 update will install the previous version. (Coded by K3CT)
Fix Rotor-EZ emulation of DCU-1 protocol. (K3IU) (Coded by N2IC)
Function Key Message: Corrected an error in the starter function key message text. The {Operator} macro was missing the closing brace "}". (Coded by K3CT)
Regional Settings: Corrected errors when storing *ini file non-integer values. This only impacts users that selected Windows Regional settings using a comma in fractional numbers (0.2 vs. 0,2). Changes made to Logger+ Audio and transceiver offset. These users will have to change the program setting or value to force the program to store settings without a comma. (LY2KZ)(Coded by K3CT)
DE QSO Party: Rules changes. NOTE: This QSO Party occurs the same weekend as 7QP, NEWE, and IN. Two of the three DE county abbreviations are identical to other QSO parties occurring this weekend. (Coded by K3CT) 3.96 MB 05 Apr 2015

N1MM Logger+ Update 1.0.4827.exe
Fixed MMTTY and 2Tone not getting started when path name includes a space. (N2AMG, VE3KI) (Coded by N2IC)
Fixed IndexOutOfRangeException in AMQ window (F1UIJ) (Coded by KU7T)
Multiplier windows: 30m band mults were not showing. (K1RM) (Coded by N1MM)
Fixed RTE in N1MMRotor when DCU sends garbage instead of position. (K3IU) (Coded by N2IC)
In contests that only allow serial number in exchange, reject alphabetic characters in exchange. (W9IIX) (Coded by N2IC)
Radio Control: Added FT-80, Rohde & Schwarz XK2100. The FT-80 needs a radio tester. (Coded by K3CT)
Radio Control: Added the FT-991. The latest firmware needs to be installed in the radio. (Coded by K3CT)
Radio Control: TS-2000 RIT +/- not shown. (G4FRE)(Coded by K3CT)
RunTime: Eliminated a runtime caused by Set Mode called before the mode is set. (Coded by K3CT)
Radio Control: Changed the suggested COM port baud rate to 9600. (N1EU)(Coded by K3CT)
DVK: Fixed a bug the external LPT controlled DVK operation. The function key can contain a space or Empty.Wav. (Coded by K3CT)
Logger Audio: When Do Not Change Audio Levels is checked, remove the output level display. (N4ZR)(Coded by K3CT)
Logger Audio: Eliminate a runtime error caused by sound cards that require a plug inserted into the jack to function. (Coded by K3CT)
Call History: Allow the data fields to be separated by a comma or semicolon. Removed the equal sign as a data field separator allowing it to be used in the User Comment Field. (Coded by K3CT)
Info Window: Display the next interval goal below the right graph. (Coded by K3CT)
Adding audio dlls to Updater installer. (K3CT) (Coded by KU7T)
When Repeat CQ is enabled, always stop repeat when callsign is entered. (OK2ZI) (Coded by N2IC)
RDXC - When oblast filled in automatically, allow overwrite without backspacing if oblast needs to be corrected. (N4ZR) (Coded by N2IC)
Added friendly messages to some COM port errors. (Coded by N2IC)
Changed URL for New Mexico QSO Party. (Coded by N2IC) 3.95 MB 01 Apr 2015

N1MM Logger+ Update 1.0.4815.exe
Fixed SSB dueling CQ when using classic audio configuration. (Coded by N2IC) 3.79 MB 26 Mar 2015 5062

N1MM Logger+ Update 1.0.4807.exe
EAPSK & EARTTY: Corrected the scoring and Cabrillo generation. (EA1FCH)(Coded by K3CT)
BARTGSRTTY: Eliminate a Runtime Error when the sent QSO time is missing. Export the logged QSO time in this case. (many) (Coded by K3CT)
Prevent unintentional toggling of cut numbers option and eliminate "G" character that sometimes appears in entry window (N4ZR) (Coded by N1MM)
Performance: Improving speed of adding and removing spots to AMQ spot list, especially when number of spots is large (K3CT) (Coded by KU7T)
Performance: Using faster string check methods in time-critical code (Coded by KU7T)
Bandmap: check for spot at frequency after updating bandmap (ON5ZO) (Coded by N1MM) 3.79 MB 23 Mar 2015

N1MM Logger+ Update 1.0.4798.exe
Changed SO2R, SSB Dueling CQ behavior. When the first character is typed in the entry field, the CQ on the other
radio immediately stops, and focus is shifted to the radio where the character was entered. (Coded by N2IC)
Digital: BARTGSRTTY fixed {TIME2} macro to send 4 digits after logging call. (Coded by N2AMG)
Digital: Correst issue where not being able to click on a time that contained a Z. (Coded by N2AMG)
Bandmap: Update bandmap every 250 msec even if sending (many) (Coded by N1MM) 3.79 MB 21 Mar 2015

N1MM Logger+ Update 1.0.4792.exe
Minor corrections for oblast.sec file for RDXC. (Coded by NA3M)
UDC: Fixed RTE when MultSqlString =CQZONE was used (G4OGB) (Coded by NA3M)
UDC: Added prefilling CQ or IARU zone in Exchange1Text field (see updated Help.txt) (Coded by NA3M)
3.79 MB 20 Mar 2015

N1MM Logger+ Update 1.0.4786.exe
Bandmap: changed code to update bandmap on radio interrupt if not sending (Coded by N1MM)
When there are multiple antennas assigned to the same band, the antenna selection is "sticky" when changing bands. (WT9U) (Coded by N2IC)
Summary Window: EARTTY & EAPSK contests, Summary column titles reversed. (SM4DQE)(Coded by K3CT)
Fix dueling CQ so that CQ is not repeated twice. (Coded by N2IC)
Catch more exceptions when COM ports disappear. (LZ1ZU) (Coded by N2IC)
Added oblast changes for RDXC. (Coded by N2IC) 3.80 MB 17 Mar 2015

N1MM Logger+ Update 1.0.4778.exe
Fixed problem with serial port footswitch. (Coded by N2IC)
Fixed footswitch ESM Enter not working on VFO B. (GW0ETF) (Coded by N2IC)
UBA Sections: Added the latest UBA Sections. There is no external file and databases will be updated at program start time. (ON5HC)(Coded by K3CT)
Network Status: Changed the column descriptions for resync (N2IC) (Coded by N1MM)
NAURYZDX: Remove the auto populating ITU zones for oblast stations. Enable band change counter for all classses. (LY2KZ)(Coded by K3CT)
Added detection and notification of disappearing COM ports. (Coded by N2IC) 3.79 MB 14 Mar 2015

N1MM Logger+ Update 1.0.4769.exe
Fixed NullReferenceException in GraphicalBandmap (IK2YCW) (Coded by N1MM)
Digital: Corrects attached RX windows from not resizing correctly and allowing text to go beyond the window frame. (Coded by N2AMG)
Digital: Removes requirement to have Fldigi configured first in the Digital pane before using it as a CW Reader. (Coded by N2AMG)
Resources: Fixed memory leak in EntryWindow, Run and S&P radio buttons do not cleanup internal .NET resources properly, turning off AutoCheck (Coded by KU7T)
Resources: Fixed memory leak in EntryWindow, bandpanel labels did not properly unregister event handlers (Coded by KU7T)
Resources: Fixed memory leak in Check window, SuperCheckPartialMananger background worker were not properly disposed of (Coded by KU7T)
Resources: If tracing is disabled, short circuiting its code for speed and memory improvement (Coded by KU7T)
Resources: properly disposing message box (Coded by KU7T)
Digital: PSK Engines were not changing speed when new mode was set for 3rd channel. (Coded by N2AMG)
EntryWindow crash on CTRL+O: Making sure all event handlers are properly unhooked while EW instance is closing (K1TTT, K9CT, KU7T) (Coded by KU7T)
CWReader: When using CWGet correctly check to make sure CWGet.ini is in the startup directory and correctly adjusts setting for ExCanal in .ini file (Coded by N2AMG)
Digital: Fixes for ObjectDisposedException (N2AMG) (Coded by KU7T)
Bandmap: Fix runtime error (IK2YCW) (Coded by N1MM) 3.79 MB 12 Mar 2015

N1MM Logger+ Update 1.0.4754.exe
Fixed crash when invalid username/password is sent to score reporting server. (K6NR, K1XM) (Coded by N2IC) 3.78 MB 06 Mar 2015

N1MM Logger+ Update 1.0.4751.exe
Digital: Corrects the Rightclick menu from not showing correctly in the DI RX Window. (Coded by N2AMG)
CW Reader window: Corrects issue where message window would open saying the TNC was not correctly setup all the time. (Coded by N2AMG)
Logger+ Audio: Eliminate a runtime that occurred when a user started a recording while a voice message was playing. (Coded by K3CT)
Handle both Yaesu GS-232A and GS-232B rotor position response messages. (VE2YTQ) (Coded by N2IC)
View, Statistics: Added IsRunQSO to the dropdown selectors. (N3RD)(Coded by K3CT)
View, Passed QSOs: Fixed the report display. (N3RD)(Coded by K3CT)
Added a number of cross-checks and status information to realtime score reporting. (K9CT) (Coded by N2IC)
Fixed highlighting of new Canadian multipliers in ARRLDX. (N3KS) (Coded by N2IC) 3.77 MB 04 Mar 2015

N1MM Logger+ Update 1.0.4738.exe
NC QSO Party: Bonus stations and bonus county rules changes. (AJ4TW)(Coded by K3CT)
MO QSO Party: RTTY & PSK QSO's are combined for digital mode QSO. Change to Cabrillo 3.0. (AB0RX)(Coded by K3CT) 3.79 MB 28 Feb 2015

N1MM Logger+ Update 1.0.4736.exe
Fixed call frame callsign color when a dupe is shadowed by a non-dupe on the same frequency that is deleted or worked. (Coded by N2IC)
Removed auto-completion of callsigns feature. (Coded by N2IC)
About form: Fixed issue where About form's allocated memory would not be properly collected by the GC (Coded by KU7T)
Multiplier windows: Fixed missing key error (W1HIS) (Coded by N1MM)
Fixed opening CW Window while a function key is being sent. No longer causes function key to be erroneously resent. (K0RC) (Coded by N2IC)
Added "assisted" element to score reporting. (DL2CC) (Coded by N2IC)
Added check for Winkey message that is too large. (K3TN) (Coded by N2IC)
Log: added ability to add/change a note on a contact via a right-click menu (DL2CC) (Coded by N1MM) 3.79 MB 27 Feb 2015

N1MM Logger+ Update 1.0.4725.exe
Sort Notes report in timestamp order (K2PO) (Coded by N1MM)
Digital: Corrects RTE when outputting to text file from DI2. (Coded by N2AMG)
Digital: Allows use of a TNC as a means of decoding in the CW Reader window. (Coded by N2AMG)
Digital: For call highlighting and validity allows for other resources to be choosen. If you had master.scp checked you WILL need to reset this setting. (Coded by N2AMG)
Fixed NullReferenceException in EditLookupTable (DK5AX) (Coded by KU7T)
Digital: Making changes in order to reduce memory footprint (Coded by KU7T)
Fixed RTE when a radio reports information before the program has completely finished startup. (KN3A) (Coded by N2IC)
Digital: Changes to reduce stalling during word highlighting in low-end computers (JA1MZM) (Coded by KU7T) 3.79 MB 24 Feb 2015

N1MM Logger+ Update 1.0.4714.exe
Fixed bug in reporting of number of processors that affected telnet spot processing (G0MGM) (Coded by KU7T)
Colors: Change the Available window Summary table title text to a light color when the background is dark. (AC0C)(Coded by K3CT)
Check Window: Clearing cache immediately after new master.scp is downloaded (version can be checked by typing VER in EW) (VE3KI) (Coded by KU7T)
Telnet: Prevent ArgumentOutOfRange exceptiono (UX0LL) (Coded by N1MM)
Multipliers: Prevent IndexOutOfRangeException (NR4C) (Coded by N1MM)
Bandmap: Prevent runtime error showing packet spots (PA9CC) (Coded by N1MM) 3.76 MB 23 Feb 2015

N1MM Logger+ Update 1.0.4706.exe
FT-1000MP: Send mode to the radio before frequency. (K1TTT)(Coded by K3CT)
Manage Skins, Colors and Fonts: - removed the Sample Window tab (coded by K8UT)
PACC: Added a space to the Cabrillo output for the station number. (PA2TA)(Coded by K3CT) 3.75 MB 18 Feb 2015

N1MM Logger+ Update 1.0.4698.exe
Wav File: Corrected the title on window that displays the wav file not found error message. (Coded by K3CT)
UDC - allow PSK modes abbreviations (PS, PM, PO) and proper calculations of multipliers for F stations for EPCFDXRTTY and EPCFRRTTY contests (G4OGB) (coded by NA3M)
Reset VisibleDupesheet window in the beginning of time periods when first callsign in new time period is logged (LY2KZ) (coded by NA3M)
UDC - changes for Bonus points calculations (see updated _UDC_Help.txt file for details) (coded by NA3M)
Cabrillo: Export Operators as a space delimited list. (LA9RY)(Coded by K3CT)
Country Mults: reduced flicker when updating with spots (Coded by N1MM)
Catch RTE when closing port. (JA1MZM) (Coded by N2IC)
Fix message box loop when Winkey port can not be opened. (K1XM) (Coded by N2IC)
MO QSO Party: Remove the serial number from the Cabrillo output. (AD0DX)(Coded by K3CT) 3.76 MB 14 Feb 2015

N1MM Logger+ Update 1.0.4678.exe
Digital: More corrections to Align function when using second DI in the PSK Engines. (Coded by N2AMG)
Digital: removal of debug Message box upon clicking on Align Button in PSK Engines. (Coded by N2AMG)
Goals: Remove the option to select a legacy database when importing goals from a prior contest. (PA1M)(Coded by K3CT)
PACC: Call History did not populate the exchange for PA users. Added UA9 to the call area multipliers prefixes. The Dutch province abbreviations should be stored in the call history Sect field. If you add the contest name in a comment the call history lookup will automatically be turned ON. This was a recent call history feature addition. (PC5M)(Coded by K3CT)
CW Sprint: Allow VI and PR to be logged as synonyms of KP2 and KP4. (K8MM) (Coded by N2IC)
Catch and ignore port exceptions when program is shutting down. (DL2CC) (Coded by N2IC)
Removed obsolete "Toggle SO2R mode" option. (N4ZR) (Coded by N2IC)
Changed default for "ESM sends your call once in S&P" to UNchecked. This only affects new N1MM Logger+ installs. (Coded by N2IC)
Bandmap: Allow setting of top of SSB band (LA9RY) (Coded by N1MM)
UDC - incorrect points calculation if Bonus points parameter was used (G4OGB, EC7AKV) (coded by NA3M) 3.79 MB 09 Feb 2015

N1MM Logger+ Update 1.0.4667.exe
Prevented UDP broadcast of network address from flooding the network if blocked for a long time (K1TTT) (Coded by N1MM)
RFCHAMP, DZCUP contests - cursor was not moving to proper place in exchange field after callsign was entered (RA3TT) (coded by NA3M)
Fixed BroadcastRadio UDP message to send Radio 2 info. (K1XM) (coded by N2IC)
Added new field (FocusRadioNr) to BroadcastRadio UDP message to indicate which radio currently had focus. (K1XM) (coded by N2IC)
Entry Window: When switching contests, begin with a blank status line. (Coded by K3CT)
Edit QSO: In a contest that doesn't exchange Zone, full edit allows the zone to be cleared and generate a runtime. Limiting the input to 1-40 was not added in case some contest stores exchange data in the zone field. The input was limited to numeric and two digit numbers prior. (VK3VT)(Coded by K3CT)
Suppress RTE when Winkey IOException. Usually caused by unplugging USB cable or USB port sleeping. (DL2CC) (coded by N2IC)
3.78 MB 07 Feb 2015

N1MM Logger+ Update 1.0.4659.exe
Fixed numerous issues with Alt-F9 (switching multiple antennas defined for the same band). (N3RD) (Coded by N2IC)
PSK Engine: Fixed issue where when a mode was switched on second Engine it was updating DitalMode1 not DigitalMode2 (Coded by N2AMG)
PSK Engine Adds test message box to Align Button for some debugging code. Will be removed in future update. (Coded by N2AMG)
Contest: In REFCW & REFSSB populate exchange from log before call history lookup. (VE1DT)(Coded by K3CT)
Database: Added code to update old ON section tables in the database. Should add the missing "AN" section on program start. (ON5ZO)(Coded by K3CT)
Filter spots before updating current spots, rather than after (N4ZR) (Coded by N1MM)
Fixed RTE in SerialControlPort. (DL2CC) (Coded by N2IC) 3.79 MB 05 Feb 2015

N1MM Logger+ Update 1.0.4653.exe
Yet another attempt to remove COM port open/close change. Sorry for being a lid. (Coded by N2IC) 3.76 MB 04 Feb 2015

N1MM Logger+ Update 1.0.4650.exe
Removed COM port Open/Close change. (Coded by N2IC) 3.77 MB 04 Feb 2015

N1MM Logger+ Update 1.0.4646.exe
Network Status: Changed "Edit Computer Names" button to "Edit Computer Addresses" because you must use NetBios name in the table (if used at all) (N4ZR) (Coded by N1MM)
Sprint: SprintRTTY, SprintLadd, SprintNS when call history populates the exchange the callsign color doesn't update. (W4NZ)(Coded by K3CT)
Networking: call for help caused r/t error. Moved menu item to just after talk, stopped it from printing in sender's info window (N4ZR, K1TTT) (Coded by N1MM)
Catch COM port Open and Close errors in SafeSerialPort. (DL2CC) (Coded by N2IC)
For COM/LPT keying, using the CW window, changed "" to AS for consistency with Winkey. For COM/LPT keying, "" is now SK. (Coded by N2IC)
Made prompt for wl_cty.dat load system modal (K1TTT) (Coded by N1MM) 3.77 MB 02 Feb 2015

N1MM Logger+ Update 1.0.4633.exe
Moved CW Sprint into its own contest class to make rules changes in other Sprints independent of the CW Sprint. (Coded by N2IC)
Modified Function Key Editor (MsgForm) to insert Cr/Lf at end of each line for improved editing using Notepad. (N4ZR, others) (Coded by K8UT)
SprintSSB: Changed the VE multiplier abbreviation from NWT to NT. (VE3KI)(Coded by K3CT)
Sprint Contest: Added the populating of the VE mults to the SPRINTRTTY, SPRINTLADD, and SPRINTNS contests. (Coded by K3CT)
Serial port change to reduce the chances of issues when opening serial ports. (Coded by N2IC)
UDC: prevent loading user defined contest with NAME longer than 10 characters. (K3CT) (coded by NA3M)
UDC: continents can be used in BonusPoints parameter (see Help.txt for details). (G4OGB) (coded by NA3M)
UDC: added values EU_COUNTRY, AS_COUNTRY, ... to MultSqlString and MultSqlString2 parameters (see Help.txt for details). (G4OGB) (coded by NA3M) 3.77 MB 30 Jan 2015

N1MM Logger+ Update 1.0.4616.exe
Multiplier windows: added code to decrease intensity of cpu usage during painting (N1EN) (Coded by N1MM)
Network Status: fixed bug that was highlighting the wrong rows when sorted in non-default order (K1TTT) (Coded by N1MM)
Call History: After a call history file import or contest change, automatically enable or disable the Call History Lookup option. This feature is optional and not required. To enable this feature, add the Contest Name on a comment line anywhere in the file. The comment line begins with a "#" as the first character on the line. The Contest Name is the text that appears in the contest selector menu. Space(s) can be added after the "#". If the call history file is used for more than one contest, add additional contest comment lines to the file. One line for each contest association. Example:

  1. NAQPCW
  2. NAQPSSB

Duplicate contest associations are ignored. A call history file containing the contest association is backward compatible with older program revisions. For the QsoParty contest, the State selector name is required after the Contest Name. Example:

  1. QSOParty PA

Upper, lower, or mixed case can be used for the text. The contest name(s) are validated with the database contest names and subtype. If the verification fails, the identifier is ignored. The user can turn Call History Lookup On and Off manually. The Call History Lookup option is not changed when the program starts. If the program changes the Call History Lookup option, a message box will appear in the Entry window. The contest association identifiers are exported during a Call History file export. (Coded by K3CT)
CQ160: Populate the exchange from the log. (K8JQ)(Coded by K3CT)
HADX: For HA stations, populate the exchange from the log before checking call history. (DL6KVA)(Coded by K3CT)
EDI Export: Fixed a runtime error that occurred on 160m. Please test EDI export, several changes were made. (DL2CC)(Coded by K3CT)
Score Window: Eliminated a Score window runtime. (AB2E)(Coded by K3CT)
SprintSSB: Multiplier rules change posted yesterday. See: http://ssbsprint.com and http://ssbsprint.com/rules/. Needs testing as US, KH6, VE, and DX participant. (KW8N)(Coded by K3CT) 3.76 MB 28 Jan 2015

N1MM Logger+ Update 1.0.4612.exe
DARC10M and WAG contests - NM should not be counted as multiplier, reserved up to 8 characters for DOK in Cabrillo file (DK5AX) (coded by NA3M)
UDC, IsMultPer parameter bug fixed (G4OGB) (coded by NA3M)
DXLog Database upgrade: revised index for faster multiplier lookup (Coded by KU7T)
Admin and DXLog database performance: moving the defrag operation (VACUUM) to non-logging activities to reduce locks and freezes (many) (Coded by KU7T)
DXLog database performance: running the table index query hints calculation (ANALYZE) only once per contest to reduce locks and freezes (many) (Coded by KU7T)
Added the following prosign characters allowed by the CW Window (ctrl-k): =(BT), (SK), (AS), +(AR). (K0RC) (Coded by N2IC)
Prevent overflow in XMLDescription (K1TTT) (Coded by N1MM)
Show assistance message in info window when call for help arrives (K1TTT) (Coded by N1MM)
Station Dialog: Use N/S & E/W to indicate latitude & longitude instead of positive/negative numbers (EA2HW) (Coded by N1MM)
Digital: When user chooses Background coloring now uses the coloring from secton 3 of the Skins and Colors setup window. (Coded by N2AMG)
Digital: CQ Repeat was not functions for TNC's this isnow fixed.. (Coded by N2AMG)
CQ 160: Fix exchange overwrite when populated from call history. (Coded by N2IC)
CQ 160: Handle the "N2NL" case where wl_cty.dat says KH6, but he is now operating from Florida. Fixed for all KH6, KL7, etc. (Coded by N2IC)
Grayline: Added Min/Max/Restore buttons. Note that minimize is disabled, because a minimized grayline will consume resources. You are better off to close it and reopen it. (K1TTT) (Coded by N1MM)
Telnet: restored functionality that allowed all modes if no modes were selected in the band/mode filter (Coded by N1MM)
CWOPS: Calculate start/stop times correctly for three different time slots (W4BQF) (Coded by N1MM)
CJTDX: Fixed run time error. (OH8EJW) (Coded by N2IC)
Multipliers - allow user to set file name & extension of expected mults file (N4ZR) (Coded by N1MM)
Function Key Editor: Add a File menu option to delete the existing message text and insert the starter message text. (N4ZR)(Coded by K3CT)
Entry Window: When using Ctl-Up, program would always find the first station on the next occupied frequency rather than the last (W7ZR) (Coded by N1MM) 3.78 MB 26 Jan 2015

N1MM Logger+ Update 1.0.4584.exe
Fix foreground color in EW invalid qso data NIMB (Coded by N1MM)
Fix for RTE editing QSOs in the log window (N2IC) (Coded by N1MM)
Corrects Error when using the DXP38 or the comport number being sent previous and after message was sent. Coded by N2AMG)
L+ Audio: Pressing PAUSE does not switch MIC between radios in SO2R single soundcard mode. (K3TUF)(Coded by K3CT)
L+ Audio: Intermittent runtime in SO2R two soundcard mode when quickly switching radios. (N2IC)(Coded by K3CT)
L+ Audio: Disable "Don't Change Audio Levels" option in SO2R single soundcard mode. The program code needs to change the levels in this mode. (Coded by K3CT)
L+ Audio: Remove Mute MIC option until improvements can be made. (Coded by K3CT)
Radio Control: Enabled the sending of the Digital filter command to the IC-756 series, IC-7600, and IC-7800 radios when the RTTY or PSK program mode selector is AFSK or AFSK-R. The user must set the custom Digi wide/narrow filter commands to use the USB/LSB-digital radio commands: Digi Wide = FE (RadioAdr) E0 1A 6 1 1 FD and Digi Narrow = FE (RadioAdr) E0 1A 6 1 2 FD. The other Icom digital modes select the filter with the mode command. (JA1MZM)(Coded by K3CT)
Band Buttons: Corrected errors in the Band Button click routine when changing modes and a band that has never been selected. Corrected an error in the Ctrl+PgUp/Dn code. (Coded by K3CT)
Telnet Spotting: Add a new telnet spot window that is used with the keyboard command Ctrl+P. Allows the user to spot a station with Alt+P, Enter. When the window is open, Esc or a Cancel button click will not spot the station. Enter or OK click spots with or without a comment. The new form uses the users fonts and colors and the window opening location is saved. (Coded by K3CT)
QSO Party: MO rules changes. Changed start time and removed the serial number exchange. (AD0JA)(Coded by K3CT) 3.78 MB 22 Jan 2015

N1MM Logger+ Update 1.0.4573.exe
XMAS Contest: NM should not be counted as multiplier, reserved up to 8 characters for DOK in Cabrillo file (DK5AX) (coded by NA3M)
HADX Contest: some HA stations will be sending HA-DXC membership number in the exchange (HA2VR) (coded by K3CT, NA3M)
UDC, parmeter MultSqlString = FirstQSO was not working (VE3IZS) (coded by NA3M)
Winkey: New feature to allow paddle and function key CW to be sent at different speeds. Use the Configurer->Winkey tab to select the Winkey Speed Pot Control option. (Coded by N2IC)
NIMB for invalid QSO was missing a title (Coded by N1MM)
Change Winkey initialization to 8/N/2. No effect, but makes a user happy. (EI3KD) (Coded by N2IC) 3.76 MB 14 Jan 2015

N1MM Logger+ Update 1.0.4562.exe
Eliminated visible wrapping of call frame text wrapping (W2IRT) (Coded by N1MM)
Working a six character grid would show in mults window until the window was closed & restarted (K1TTT) (Coded by N1MM)
EntryWindow/Bandpanel/performance: Fixed Win32Exception (Error creating windows handle) by silencing Windows redrawing events until all calculations are done (many) (Coded by KU7T)
Performance: Fixed issue where second EntryWindow would process all packet spots unneccessarily, first EW is doing it already (Coded by KU7T)
{Wipe} fix was causing runtime error (N7FLT) (Coded by N1MM)
CWReader: Corrects issue that was causing RTE if directory was blank when trying to load. (Coded by N2AMG)
Digital: Corrects error in reading digital mapped mode when using Fldigi. (Coded by N2AMG) 3.76 MB 12 Jan 2015

N1MM Logger+ Update 1.0.4554.exe
PACC Contest: Corrected a database LookUp table error that prevented the logging of valid QSO's. (Coded by K3CT)
Info Window: Fix color of chart labels when using dark background colors. (K3CT) (Coded by N1MM)
SSB Messages: Changed the code to allow any case of Empty.Wav (don't play any message). (Coded by K3CT)
Statistics: Suppress legend for series with no values like GridSquare in CQWW (LY2KZ) (Coded by N1MM)
MultiStation: Added code to handle unreachable host with msgbox instead of runtime error (N0XR) (Coded by N1MM)
Telnet: Prevent bad time in spot from causing runtime error (S55O) (Coded by N1MM)
Telnet: Exclude * and # from string substitutions in Telnet macros (N4UEZ) (Coded by N1MM) 3.75 MB 11 Jan 2015

N1MM Logger+ Update 1.0.4537.exe
Digital: Corrects issue where pausing in one Di paused the other DI. (Coded by N2AMG)
Digital: Added rule so 5NN does not detect as call. (Coded by N2AMG)
Radio Control: Eliminate a start up runtime that occurred when starting up with digital and an Icom radio that was powered off. (Coded by K3CT)
Entry Window: The window title indicates an error in contests where FM contacts can be made. (K3TUF)(Coded by K3CT)
Clarify error message when another program is using UDP port 13010. (K3CT) (Coded by N2IC)
Added more descriptive message when a COM port can not be opened. (Coded by N2IC)
Telnet: Contest mode filter was not working properly (N4ZR) (Coded by N1MM)
Telnet: Classified Skimmer "OTHER" spots as RTTY so they would not be classified as CW (Coded by N1MM)
Fix runtime error broadcasting radio info (K1TTT) (Coded by N1MM)
Add more information when port settings fail. (Coded by N2IC) 3.75 MB 04 Jan 2015

N1MM Logger+ Update 1.0.4521.exe
Radio Control: Add code to swap VFO's manually for the Jupiter radio. A firmware command does not exist. Include all radios that do not have a firmware command coded. (VE3BR)(Coded by K3CT)
Winkey: Initialize Winkey to current CW speed at startup. (WH7W) (Coded by N2IC)
Made new version nag system modal (N1EN) (Coded by N1MM)
When switching from a CW or SSB Contest to Digital Now opens the Digital window. (Coded by N2AMG)
When switching from a digital contest to a CW/SSB contest now closes the Digital window. (Coded by N2AMG)
Typing PSK31,PSK63,PSK125,PSK250 into the Entry Window callsign box will load the preferred PSK engine in that mode. (Coded by N2AMG)
When using a TNC and an Attached RX window print would not appear in the attached RX window. (Coded by N2AMG)
Main Digital RX windows and the RX windows nowsupport up to 24pt fonts via the Font Sizer located on the window. (Coded by N2AMG)
Corrects RTE when DigitalPort is not created correctly. (Coded by N2AMG)
Adds check to make sure DigitalPort is created before accessing it. (Coded by N2AMG)
Network Status: Errors will show for 10 seconds in a non-intrusive message box as well as be put in the Messages tab (Coded by N1MM)
Allow digi sub band within a CW sub band (Coded by N1MM)
Always accept and pass spots identified as CW, RTTY or PSK if the appropriate filter is enabled. (i.e. ignore sub band freq range for filtration) (Coded by N1MM) 3.78 MB 03 Jan 2015

N1MM Logger+ Update 1.0.4510.exe
Multiplier error in AGCW contest when working dupes fixed (DK5AX) (coded by NA3M)
Allow Escape key to be used when function key contains only {TX} macro. This allows a function key to enable PTT, for those who have difficulty using a footswitch. (Coded by N2IC)
Rotor: "Always on top" option was not working (XE3/K5ENS) (Coded by N1MM)
WWPMC Contest: Populate the exchange from the log. If the exchange box is blank populate with the CQ Zone and hi-lite the exchange so typing will replace the number. (KG4W)(Coded by K3CT)
Runtime: Added debug code to locate a runtime error associated with the Band Buttons. (N1MM)(Coded by K3CT) 3.76 MB 03 Jan 2015

N1MM Logger+ Update 1.0.4502.exe
Stop red/green dot row fields from jumping around (N2IC) (Coded by N1MM)
INI Files: Removing empty sections and adding blank lines before section for increased readability (Coded by KU7T)
WWPMC Contest: Bug fixes and changes necessary for the contest this weekend. Enter only PMC abbreviation or Cq Zone in the Sent Exchange dialog box. Tnx to S54X, G4OGB, and KG4W for testing feedback. (S54X)(Coded by K3CT)
Rotor: Fix overlap of direction on azimuth indicator. (Coded by N1MM) 3.76 MB 02 Jan 2015

N1MM Logger+ Update 1.0.4496.exe
Radio Control: Slowed the Argonaut radio polling due to radio errors. (AB1VL)(coded by K3CT)
Radio Control: Corrected the Argonaut Suggested Settings text in the COM port dialog window. (AB1VL)(coded by K3CT)
NRAU & other contests that use the States/Sections Multiplier window: reverted to old format for window when sections are not assigned to call areas (LY2KZ) (Coded by N1MM)
Improvements to layout of Configurer and About windows at 125% and 150% magnification (many) (Coded by N1MM) 01 Jan 2015

N1MM Logger+ Update 1.0.4486.exe
Made serial port access thread-safe. This should have no user impact. (Coded by N2IC)
Call History: Eliminate runtime error caused by a user attempting to load a binary file into the call history database.(Coded by K3CT)
Run Time Error: Eliminate a runtime caused by switching contests while the associated call history file is still loaded from the first contest selection. (N2IC)(Coded by K3CT)
Radio Control: Argonaut radio tested, added to the menu. (AB1VL)(Coded by K3CT)
INI Files: Sorting sections and settings (PA1M) (Coded by KU7T)
Increased size of Split/Dupe indicator (many) (Coded by N1MM)
Radio Control: Added a new option in the radio COM port menu allowing the user to slow down the polling rate. This is for users with polling performance issues caused by other software adding polling instead of using the existing data. (Coded by K3CT)
Config Menu: Added a SO2V menu option for the repeating VFOA CQ function for radios with dual receivers. (Coded by K3CT)
Radio Control: Add run time text to ErrorLog.txt file. (Coded by K3CT)
Radio Control: Added Argonaut VFO selection polling and TX On/Off commands for radio command PTT. (coded by K3CT)
Radio Control: Eliminate the Entry Window filter code error message. (Coded by K3CT)
Replaced some Winkey run time errors with message boxes. (Coded by N2IC)
Radio Control: Corrected the Argonaut filter commands. (AB1VL)(coded by K3CT) 3.76 MB 31 Dec 2014

N1MM Logger+ Update 1.0.4477.exe
Fixed unending run time error loop when garbage is received on a serial port, or the port is misconfigured. (VE3CX) (Coded by N2IC)
EntryWindow: Load buttons after changing Station Dialog in case callsign changes. (K1TTT) (Coded by N1MM)
ARRL 160: When entering a non-VE3 callsign the populated exchange is not hi-lited. (VE3CX)(Coded by K3CT)
Fix for Italian issue with use of "." as time separator (IK4OMU) (Coded by N1MM)
Fixed footswitch operation for "Normal" and "Band Lockout". (K1RZ) (Coded by N2IC) 3.76 MB 30 Dec 2014

N1MM Logger+ Update 1.0.4469.exe
DXpedition mode - SSB Default Function Messages.mc file was loaded in CW mode (K0RC) (coded by NA3M)
LastRxSN was changed to Integer from Short. When it is Short it was causing a problem for some contest with numbers in Exchange > 32767 (coded by NA3M)
DXpedition mode - Custom Constant DXpedModeEnabled changed to DxpeditionCompile, SuperCheckPartial enabled. (coded by NA3M)
Telnet: Fixed OutOfMemoryException on master station, occurred after a few hours with auto-connect enabled when program could not connect to cluster (K1TTT, K3RMB, K5WW, others) (Coded by KU7T)
Telnet: Fixed OutOfMemoryException on non-master station, occurred when master station was not available (K1TTT) (Coded by KU7T)
Telnet: Fixed spotting and other telnet operations from non-master station (Coded by KU7T)
GridSquare mult window was not showing grids when contact worked (NJ4F) (Coded by N1MM) 3.73 MB 29 Dec 2014

N1MM Logger+ Update 1.0.4457.exe
XMAS contest - added Sent Nr in Log Window and Sent EXCH in Cabrillo log (G4OGB) (coded by NA3M)
Call History Import: Added ErrorLog.txt entry to debug user run time errors. (Coded by K3CT)
Logger+ Audio: SO2R single sound card mode, the stereo output did not switch when pressing PAUSE and using the MIC. (K3TUF)(Coded by K3CT)
Icom Radio Control: Log port object errors in the ErrorLog.txt file do not display a run time error. (Coded by K3CT) 3.75 MB 27 Dec 2014

N1MM Logger+ Update 1.0.4452.exe
Added another check to keep users from using Do_Not_Use_or_Erase.s3db. (Coded by N2IC)
Contest RunTime: Changed the following contests to eliminate runtime errors: CISDX Contests, CVADX Contests, HADX, RSGB2128, SPDX contests, UKDX contests, UKRAIN contests. (Coded by K3CT)
Internal CW: Added High Performance Event Timer status to the Entry Window status message output on a timing correction. (Coded by K3CT)
New footswitch code has been enabled. Please test and report issues. (Coded by N2IC)
Telnet: Changed the default telnet cluster export and import directory to the User\N1MM Logger+\ExportFiles directory. (Coded by K3CT)
Configurer Mode Control: Added "Always use packet spot mode". If checked, the program will use the calculated mode from the packet spot to set the radio mode after translating RTTY/PSK to the required modes as set in this tab. The intention is that this become the normal behavior and the option removed, so please test. The mode is calculated when the spot is read in, and not recomputed after bandplans are changed. Of course, spots with the mode identified ignore the bandplan. (many) (Coded by N1MM) 3.73 MB 25 Dec 2014

N1MM Logger+ Update 1.0.4442.exe
WW PMC contest - WWPMC.sec updated (S54X) (coded by NA3M)
UDC - parameter BonusPoints, added IsComment value, see Help.txt for details (G4OGB) (coded by NA3M)
Telnet: When AR6 cluster dx mode DEBUG is enabled, don't display spots in the Info window. (PC5M)(Coded by K3CT)
Fixed Configurer run time error when comupter has non-numeric COM ports. N1MM Logger only supports numbered COM ports. (W5JR) (Coded by N2IC)
Digital: Calls found in garbage were not put into the Grab window. (Coded by N2AMG)
Digital When Xing out of Digital Setup window now prompts user if settings have changed to save instead of exiting. (Coded by N2AMG)
When using Fldigi as CW reader makes better attempt to grab the windows handle of the Fldigi window. (Coded by N2AMG)
RRCW, RRSSB, PACC Contests: Eliminated a runtime that occured when call history was enabled and a callsign was entered that was not in the call history. (W4NZ)(Coded by K3CT) 3.72 MB 21 Dec 2014

N1MM Logger+ Update 1.0.4429.exe
Hide option to edit off times. Not used in cabrillo at this time (N4ZR) (Coded by N1MM)
Added handling for VHF, UHF and SHF bands in {PASS freq} macro. (PC5M) (Coded by N2IC)
Call History: When importing multiple files the Name field could be cleared. (W4TTM)(Coded by K3CT)
Call History: Added the import directives !!MapOnSection!! and !!ValidateArrlSection!!. !!MapOnSection!! maps GTE, ONN, ONE, ONS to the ON section. !!ValidateArrlSection!! removes any section that is not an ARRL section (includes VI, PR) and can be used to remove the ON section from input data. Please test. (Coded by K3CT)
CatMacro: Changed the command pacing separator from a / to \ because the character appeared in CW callsign strings. CatMacros that send multiple commands with pacing to the radio need to be changed. (Coded by K3CT) 3.72 MB 17 Dec 2014

N1MM Logger+ Update 1.0.4421.exe
Changed behavior of Alt-F6. The new behavior swaps frequencies between radios, but does not move entry focus. Alt-F5 behavior stays the same (swaps frequencies and swaps entry focus). (Coded by N2IC)
Fixed run time error when exiting program. (VE3CX) (Coded by N2IC) 3.75 MB 16 Dec 2014

Latest Update 0.19.4147.exe
Caught IO Exception in CWInt (YV5EN) (Coded by N1MM)
Mult windows: set mult column width properly at 125 & 150% magnifcation (W6YA) (Coded by N1MM)
Attempt to fix NullReferenceException during operator change (K8IA, JG1VGX, DK5AX, KU7T) (Coded by KU7T)
MDBConversion: Handling case of OLEDB errors (i.e. non-recognizable file format) with a message box instead of exception dialog (DK5EZ) (Coded by KU7T)
Added Ukranian.sec to Resources for Ukrainian DX Contest (UX1IL). (Coded by NA3M)
UDC - use folder ...\N1MM Logger+\SupportFiles\ for Bonus2 files (RA3TT). (coded by NA3M)
Shorten source code file paths in error text (N1MM) (Coded by KU7T) 3.64 MB 30 Oct 2014 2228

Latest Update0.19.4135.exe
Open Database: Preventing SQLiteException (SQL logic error or missing database) by enforcing that database must be under the Database folder (W6VAR, K5EK, LU3CT, EA3FP) (Coded by KU7T)
Logger+ Audio: Initial use configuration improvements which may have required a program restart in earlier versions. Fixed a meter display and volume slider bug that surfaced when using audio devices with more than 2 channels. (Coded by K3CT)
Score Window: Eliminate a RunTime Error when the user's database contains logged QSO with no mode. (Coded by K3CT)
Logger+ audio: Output of debug information in the output and input device text box displaying audio devices that were omitted when generating the device list. (Coded by K3CT)
Oceania Contest: Changed the contest start and end time. (N7IR)(Coded by K3CT)
Bandmap: When clicking on the CQ button, a CQ frequency on another band/mode doesn't set the radio mode correctly. Note: Users need to have Config, Mode Control tab options set correctly for the radio mode to change. (several)(coded by K3CT)
Legacy Audio: Changed the defaults to 16 bits and 8kHz sampling. (K6LL)(Coded by K3CT)
Radio Control: Corrected the polling of the FT857/897 mode. (DK8NT)(Coded by K3CT)
Info Window: Change the area graph color when the user changes the color and selects Preview. (Coded by K3CT)
SS: Fixed pressing space bar when call history not enabled. (K9SE) (Coded by N2IC) 3.63 MB 29 Oct 2014 880

Latest Update0.19.4130.exe
Log: Fix RTE searching QRZ for a call (DL7FZ) (Coded by N1MM)
Statistics: Only show palette selector if Graph tab is selected (W1TJL) (Coded by N1MM)
RestoreWindowsPositions: Fixed FileNotFoundException when layout file not found during Restore window positions (LU7DH) (Coded by KU7T)
Networking: Fixed ArgumentOutOfRangeException when closing "Edit Computer Names" dialog with zero valid rows (AG6AY) (Coded by KU7T)
Telnet: Fixed NullReferenceException in some cases when not connected (WB5EIN) (Coded by KU7T)
Logging: Fixed SQLiteException (database is locked) under some conditions (KE4S) (Coded by KU7T)
Bandmap: Fixed InvalidOperationException under some conditions, VB.Powerpacks bug (W1GQ) (Coded by KU7T)
InfoWindow: Fixed NullReferenceException that occurs under rare conditions (after a SqliteException) (K4RO) (Coded by KU7T)
Call history: Re-Initializing Check window's call history in-memory cache after reloading calls from Log (Coded by KU7T)
Call history: Fixed SQLiteException for special characters while reloading calls from Log (HB9OAB) (Coded by KU7T)
SS Exchange: When call history fills in exchange, set cursor to the end of the exchange (K9WX) (Coded by N2IC)
CQWW: fix for wrong zone sometimes logged when enter pressed with no zone in entry window zone textbox (many) (Coded by N1MM) 3.66 MB 28 Oct 2014 1166

Latest Update0.19.4115.exe
Changed program expiration warning to remove the word "beta" (KU7T) (Coded by N1MM)
Cabrillo: Force output in ANSI format (was UTF8 on some machines). Caused Byte Order Mark to be inserted when edited with Notepad. (DH8BQA) (Coded by N1MM)
IC-7600 & TS-990: Removed the Logger+ change that switched the order of the frequency and mode commands when clicking on spots in the Available window. Logger+ and the legacy program send commands in the same order for all radios.(Coded by K3CT) 3.66 MB 23 Oct 2014 4893

Latest Update0.19.4111.exe
Handle runtime error when erroneous "0?" received from AlfaSpid rotor. (Coded by N2IC)
WAG: Check the log for an exchange only when working a DL. (DH8BQA) (Coded by K3CT)
Entry Window: Setting frequency and quickly entering typing a mode would type the letters out of order (K9CT) (Coded by N1MM)
Telnet Filter tab controls were not effecting changes until restart (NT6X) (Coded by N1MM) 3.65 MB 22 Oct 2014 1272

Latest Update0.19.4107.exe
Digital: Corrects a RTE when the MMTTY and Fldigi paths were empty. (Coded by N2AMG)
Digital: Corrects RTE when reading from MMTTY.ini file. (Coded by N2AMG)
Fix RTE due to bad data in JARTS WW (CT1AGF) (Coded by N1MM)
WAG: Fixed the populated exchange not being hi-lited. (DF1LX) (Coded by K3CT)
JTDX: Fixed runtime error when space pressed (AB1QB) (Coded by N1MM) 3.64 MB 20 Oct 2014 1444

Latest Update0.19.4101.exe
Catch port in use and display a message (NF8J) (Coded by N2IC)
Radio: Change the wording in the user programmable filter command msg box.(N1EN)(Coded by K3CT)
Band Panel: Eliminate a Runtime error caused by the user logging a QSO with no mode set. The QSO entry needs to be manually corrected to add the proper mode. It's not understood how this is occurring. (G4EST)(Coded by K3CT)
Fixed run time errors associated with various COM port failures. Replaced with friendlier messages. (Coded by N2IC)
Fixed error message when Icom COM port not configured correctly. (ON5DI) (Coded by N2IC) 3.65 MB 19 Oct 2014 1294

Latest Update0.19.4093.exe
EntryWindow: Fixed ObjectDisposedException in EntryWindow (WS7L) (Coded by KU7T)
Telnet: Continent and Country spotter filters were not working (LY2KZ, N4ZR) (Coded by N1MM)
Winkey: If sending from the paddle and press a function key, queue the function key message until the paddle CW stops. (W3YY) (Coded by N2IC)
Raise time sync threshold to 2 seconds (NR4M) (Coded by N1MM) 3.64 MB 15 Oct 2014 3418

Latest Update0.19.4086.exe
Digital: Corrects AFC On/Off with Run operation. (Coded by N2AMG)
Config: Corrects filter when choosing MMTTY/2Tone from FileDialog. (Coded by N2AMG)
Fix Transaction Log import to handle old and new formats. (N4ZR) (Coded by N2IC)
Send correct bidirectional antenna setting in rotor UDP message. (YO3DMU) (Coded by N2IC)
MsgForm - View Window: Added menu choice "Save text to TXT file" (K0RX)(coded by K8UT)
Added to RadioInfo UDP broadcast. Shows current rotors for the radio. (YO3DMU) (Coded by N2IC)
Configurer: Add support for 115200 baud devices (many)(coded by K8UT)
Telnet: Wasn't filtering RTTY spots (many) (Coded by N1MM) 3.65 MB 13 Oct 2014 1317

Latest Update0.19.4075.exe
Rotor: Block "-" from being used in a rotor description, "-" is used in the code and has a special meaning. (W9WI) (Coded by N2IC)
Filter Code: Corrected the routines that allow the user to modify the radio filter commands. Programming a new filter for Icom caused a Run Time Error. (SM5CZQ)(Coded by K3CT)
Digital: Corrects Pause bar from not working correctly. (Coded by N2AMG)
Digital: Add new grab window option in Settings window."Grab only master.scp calls and Prev. worked calls in current contest"
Improve error handling when port goes away. (W7DRM) (Coded by N2IC)
Networking: Fix run time error in Time sync code. (DC3RJ) (Coded by N1MM)
UBAON: Fixed the run time error when generating a Cabrillo file.(ON5ZO)(Coded by K3CT) 3.63 MB 11 Oct 2014 2008

Latest Update0.19.4066.exe
Telnet: Elminated NullReferenceException race condition in Close(). Fixed with synclock. (W9ILY, KJ4VTH) (Coded by KU7T)
Telnet: Fixed timing issue where the server response to a BYE command was not printed. (W9ILY) (Coded by KU7T)
Entry Window: Made sure to turn on band panel marker when setting band panel to visible (W3YY) (Coded by N1MM)
Network Status: Don't put time sync message in Message column (K3CT) (Coded by N1MM)
Network Status: hid unused Status column (K3CT) (Coded by N1MM) 3.64 MB 09 Oct 2014 1536

Latest Update0.19.4061.exe
Warn the user if they are in a digital sub-band, attempting to transmit a digital mode, but there is no Digital Interface window open. (N6IE) (Coded by N2IC)
Log: Disabled two options when no rows displayed. (Coded by N1MM)
Converted setting of time of last QSO via Thhmm (KF7WXZ) (Coded by N1MM)
Entry Window: SS exchange label was not blanked out when switching from SS to another contest (N6XI) (Coded by N1MM)
Entry Window: Improved the Band Button multi-station right click pass station operation. (Coded by K3CT)
Improve error handling when port goes away. (W7DRM) (Coded by N2IC)
UDC: bug introduced in 0.19.4038 was fixed (N8FYL) (Coded by NA3M)
Pass Frequency: In this order, changed the determination of the pass frequency to be: the CQFrequency if running and not zero, the Pass Frequency if not running and not zero, the radio frequency which is displayed in the Network Status window. (Coded by N1MM)
Removed check for valid soundcard when mode is CW and swapping VFO's or radios. (VE3KI) (Coded by N2IC)
Telnet: On Windows XP, some nodes could not be connected to. Fixed. (NA2NY, W8JWN, W9ILY) (Coded by KU7T) 3.64 MB 08 Oct 2014 600

Latest Update0.19.4047.exe
Changed title of runtime error dialog (K0BT) (Coded by N1MM)
Function Key File editor: fixed RTE when resetting default message files (G4MKR)(coded by K8UT)
Digital: Re-worked Digital Insert key work flow for correct operation. (Coded by N2AMG)
Entry Window: Update phone band button frequencies properly (Coded by N1MM)
Make county label wider for QSO parties (Coded by N1MM) 3.65 MB 07 Oct 2014 1057

Latest Update0.19.4038.exe
UDC: fixed the bug that prevented using oblast.sec (coded by NA3M)
Added oblast.sec file to Resources (coded by NA3M)
NJ QSO Party: Fix SQL conversion error that impacted in-state users. Removed the code for the MARAC QSO party which was the same weekend. Changed the QRP multiplier to be a score multiplier instead of a QSO Point multiplier. (KC2OGR) (Coded by N1MM & K3CT)
Help menu - Keyboard Shortcuts: fixed 404 error (W1UE)(coded by K8UT)
EDI Export: Commented out RHBBS export because the data is not available. Will correct this after other changes are made. Eliminated the double prompt for file overwrite. Added Band text string to the ouput file. Export by band is not supported. Still some un-finished work to complete.(Coded by K3CT)
Digital: MMTTY would fail to copy good if Send HamDefault on Run Change was checked in Digital Setup. Thisnow corrects that. (Coded by N2AMG)
Digital: When DI is loading do not try to set radio mode if radio = nothing. (Coded by N2AMG)
Entry Window: Stop Ctl-P from spotting a contact if comment is empty (when no call in call textbox) (ON5ZO) (Codeed by N1MM)
Entry Window: If the number of bands selected in the Band Button display causes the Entry Window height to grow, make all Band Buttons visible. (Coded by K3CT) 3.64 MB 05 Oct 2014 1387

Latest Update0.19.4019.exe
Digital: Corrects RT Error when settings up DXP38 in All windows (Coded by N2AMG)
Digital: When changes are made in the RX windows After user prompt auto close and reopen RX Window. (Coded by N2AMG)
Digital: When logging contact makes sure to remove that call from Grab Window. (N2AMG) 3.63 MB 04 Oct 2014 1401

Latest Update0.19.4017.exe
Fixed internationalization problem with fonts (DH8BQA) (Coded by N1MM)
Entry window would not format properly if band buttons not shown (N2IC) (Coded by N1MM)
Refined when bandmap is updated (PA3EZC) (Coded by N1MM)
Fixed slowdown in LogContact aggravated by fix for networking issue with overlaying data. (K3CT) (Coded by N1MM)
Telnet: Clear Connect button if cluster no longer available (Coded by N1MM)
Don't raise ContactChanged events when part of bulk update - e.g. Rescore contest (N2IC) (Coded by N1MM)
Grid Multiplier window: was not accommodating 6 character grids (PH2M) (Coded by N1MM)
Fix Antennas tab to allow comma-separated list of bands without spaces between commas (UA6LJB) (Coded by N2IC)
Manage Skins, Colors, Fonts: fix problem with INI read/write integer font sizes (W4TV)(coded by K8UT)
QSO Party: Station check of the ARRL Section was incorrect for DX stations. (SM3CER)(Coded by K3CT)
Band Buttons: The active Band Button indicator did not update when the Entry window only had RX focus. (K9CT)(Coded by K3CT)
Band Buttons: When changing between contests with different number of Band Button modes the Entry window was drawn with a blank space to the right of the Band Button table. Added code to prevent runtime errors when the Band Buttons are not displayed.(Coded by K3CT)
Check Window in SO2R: Make Check window aware of focussed EntryWindow, only process a search for that EntryWindow's call box and call frame (N2IC) (Coded by KU7T)
Check Window in SO2R: When focus switching, processing search search for the newly focussed EntryWindow's call box and call frame (N2IC) (Coded by KU7T)
Radio: Added the FT757GXII radio to the menu. Identified a radio tester. (Coded by K3CT)
Networking: Trapped InvalidOperationException when network is not connected (K3CT) (Coded by N1MM)
Telnet: Buttons were not respecting Show buttons option (VE1DT) (Coded by N1MM)
Log Selection: Associated Files Help was not working (LY2KZ) (Coded by N1MM)
Initialized ContestInstance ModeCategory to empty string to prevent RTE (DF4WC) (Coded by N1MM) 3.63 MB 03 Oct 2014 760

Latest Update0.19.3995.exe
Available: Fixed RunTime error. (KU7T) (Coded by K3CT)
Digital: When tuning off CQ freq and run changes to S&P Digital settings effected by the run to S&P change were not functioning. (Coded by N2AMG)
Digital: When changing bands using EW band Buttons No Longer reload Digital window if switching between same mode. (Coded by N2AMG)
Digital: RX Window forms was not properly snapping to other forms as it should have. (Coded by N2AMG)
Digital: Corrects Error in the Fldigi Class that was causing the version number to be wrong. This was causing the way the rx text to be gotten to not work correctly. (Coded by N2AMG)
UTC times: Rolled back changes that broken UTC times. (Coded by KU7T) 3.64 MB 01 Oct 2014 955

Latest Update0.19.3975.exe
Digital: When using non-Scrolling windows current row is back lighted in light grey (Coded by N2AMG)
Digital: When exiting the Digital Setup menu and at various times during loading the logger was looking for a certain caption
from MMTTY to make sure it had loaded correctly. When using 2Tone as the main decoder the caption was not returned corrrectly and caused an endless loop. (Coded by N2AMG)
Call History: Corrected a call history birthdate error that was caused by a change in the Windows short date format. (N7US)(Coded by K3CT)
SO2V/SO2R: Made Window/Entry Window always open 2nd Entry Window if in SO2V or SO2R (Coded by N1MM)
SO2V/SO2R: Fixed RTE when closing program with both Entry Windows open (Coded by K8UT)
Telnet Client: Fix for rte closing (ON7UZ) (Coded by N1MM) 3.65 MB 30 Sep 2014 918

Latest Update0.19.3967.exe
Info: Changed the last 10 & 100 rate calculations. (KU7T)(Coded by K3CT)
Tour RunTime: Corrected runtime on program start. (LY2KZ)
CQWW RTTY: Corrected WIPE when the exchange boxes were populated from the log or call history. Also added a change to prevent XE, KL, and KH6 from populating with CallHistory. (Coded by K3CT)
Partner/Mode: Incremental improvements. Needs additional work. (Coded by K3CT)
Networking: Log window was overlaying contact information in the display (only) when prior contacts were edited or when a station would log a contact with an earlier timestamp. This can happen if the stations have not synchronized their computer time. QSOs were logged correctly. This was only a display problem. (W1UE) (Coded by N1MM)
Fix Runtime error in ContestInstance (many) (Coded by N1MM) 3.64 MB 29 Sep 2014 739

Latest Update0.19.3963.exe
Networking: Move update of Pass frequency from PacketManager to CQFREQ message processing in MultiStation (K3CT) (Coded by N1MM)
Added friendly error message for one symptom of a sleeping usb port (W7SLS) (Coded by N1MM)
Passing Qso's: Don't randomize a passed station frequency. (Coded by K3CT)
Call History: Corrected an error when importing a call history file. The BirthDate field was not stored correctly when the user changed the Windows Regional date setting. (N7US)(Coded by K3CT)
Goals Import: Changed the file type selector text. (N1EN)(Coded by K3CT)
When auto-updating, force rotor program to close whether we started it or not. (W3IUU) (Coded by N1MM)
Internationalization: Using culture invariant string comparison and number parsing (the Turkish I problem) (TA1CR) (Coded by KU7T)
Bandmap: improved double-click reliability (many) (Coded by N1MM) 3.62 MB 29 Sep 2014 529

Latest Update0.19.3950.exe
Digital: Corrects RT Error when clicking CLR-Rx on DI2 when RX windows are loaded. (Coded by N2AMG) 3.64 MB 26 Sep 2014 1923

Latest Update0.19.3946.exe
Digital: RXWindows were not loading correctly when selected TNC (Coded by N2AMG)
Code robustness: Preventing potential ObjectDisposedExceptions in a few digital forms by using RemoveHandler (Coded by KU7T)
Packet spot removal: Fixed issue where not all spots were always removed when requested via bandmap right click (SM3CER) (Coded by KU7T)
Packet spot removal: Made last valid spot time persistant; on next launch application does not fetch old spots (K3CT) (Coded by KU7T)
Packet spot removal: Fixed issue where "Remove spots, ALL BANDS" did not remove self-spotted calls (VE1DT) (Coded by KU7T)
Function Key: Removed the File, Import, Function Key menu. The imported file was not associated with the contest and the function key editor did not display the actual macros used by the program. Users should use the import on the function key editor File menu or associate a file with the contest in the contest dialog, Associated Files tab. (W1EBI)(Coded by K3CT)
Entry Window wipe: restored lastcontrol.focus. With it commented out, pressing space would not advance the cursor (Coded by N1MM)
Digital: Corrects RT Error when trying to return MMTTY PTT Port from mmtty.ini when path has not been set. (W3SA) (Coded by N2AMG) 3.64 MB 25 Sep 2014 1004

Latest Update0.19.3938.exe
Op was not being copied in Contact.CopyFrom (various symptoms) (K8IA) (Coded by N1MM)
Mults: Added clear expected mults option (W4BQF) (Coded by N1MM)
Mults: Editing of mults was not forcing to upper case (Coded by N1MM)
Force CW subband band bottom to be bottom of band. Force SSB subband top to be top of band (Coded by N1MM)
Packetspots: Ensuring data integrity of underlying packet spot data structure (Coded by KU7T)
Band Map: Making sure a call cannot be spotted on multiple frequencies at the same time, same for CQ-Frequency (K9CT) (Coded by KU7T) 3.63 MB 24 Sep 2014 977

Latest Update0.19.3931.exe
Digital: Corrects Auto TRX Update from not working correctly in DI2 (Coded by N2AMG)
Digital: Corrects trying to clear multi RX windows associated with DI2. (Coded by N2AMG)
Call history lookup: fixed incorrect sql query (W1UE) (Coded by KU7T)
Visible dupe sheet: Fixing ObjectDisposedException by removing handler on closing (K0HB) (Coded by KU7T)
Digital: ESC was not working if mouse was over the top menu bar in the RX windows (Coded by N2AMG)
Logger+ Audio: Some minor improvements to the Audio form labels and controls. Trapped a configuration issue and added a message for the user.(Coded by K3CT)
Ctl-O: Telnet window was not being saved/restored (W1TJL) (Coded by N1MM) 3.63 MB 23 Sep 2014 911

Latest Update0.19.3922.exe
2nd Entry window was not being restored in some cases (ON5ZO) (Coded by N1MM)
Bug Fix: Additional change to the Band Buttons change in version 0.19.3909. (VE1DT)(Coded by K3CT)
Digital call stacking: fixed all 3 modes: FIFO, LIFO, FIFOMultsFirst. RTTY, PSK; not CW, not SSB yet (Coded by KU7T)
Logger+ Audio: Eliminated a runtime and added a message for the user. (Coded by K3CT)
Digital: Correct issue where various modes were not logging correctly when using MMVARI (Coded by N2AMG)
Fix runtime error in download of next version (WE8JWN) (Coded by N1MM) 3.63 MB 22 Sep 2014 660

Latest Update0.19.3909.exe
Correct fix of startup code (Coded by KU7T)
Partner mode radio target options were not saving properly (Coded by N1MM)
Don't update check window when call frame is updated by partner (K3CT) (Coded by N1MM)
Score reporting is opening a new copy each time configurer is open/closed (JG1VGX) (Coded by N1MM)
Network Window: Remove computer network options that are not complete. Change label text in the Options tab. (N1MM)(Coded by K3CT)
Removed requirement for partners to designate each other for network partner mode. If the stations are withing 500 Hz partner mode will be in effect (Coded by N1MM)
Fixed runtime error in reverse call history lookup. Bad column name "SectText" (W4BQF) (Coded by N1MM)
ONUBA: Fixed runtime error logging ON stations (ON5D) (Coded by N1MM)
Band Buttons: The band button color does not change when you tune off of a station. (VE1DT)(Coded by K3CT)
Band Buttons: Eliminated the clear color delay when the callsign is deleted by tuning off a station, {WIPE}, or ALT+W. Disabled the clear button color counter when a user types a new callsign immediately. (Coded by K3CT)
Callhistory Import: When using the import directive !!VALIDATE50STATE!!, if the imported field data is not recognized as a state, try to validate it by passing the string through the Section to State converter. When import ARRL Section data, the Call History import code already does populate a blank State field by converting the ARRL Section to a State. (Coded by K3CT)
RunTime: Fixed a runtime when using the TOUR command. Please test for correct operation. (LY2KZ)
Telnet: Eliminated double-painting when clicking on a tab (Coded by N1MM)
Fixed runtime error in Networked computer code when changing contests (Coded by N1MM) 3.63 MB 21 Sep 2014 663

Latest Update0.19.3892.exe
Networking: Show computer name when making another station the master (Coded by N1MM)
Networking: Enabled Call Stacking (Coded by N1MM)
Networking: Made tracing work (Coded by N1MM)
Digital: Corrects RTE when using the InternalRXWindow in DI2. (Coded by N2AMG)
Disabling some startup code to fix unhandled exception in Kernelbase.dll (Coded by KU7T) 3.62 MB 20 Sep 2014 577

Latest Update0.19.3887.exe
UDC: Fixed TOUR command (RA3TT). (Coded by NA3M)
Fixed MorseRunner-N1MMLPlus AHK script (Coded by KU7T)
Configurer: fixed "String to use on CW" caption (N1EN) (Coded by N1MM)
Fixed real-time updating of typed SS exchange. (Coded by N2IC)
Change in {CTRLFx} code. Please report any issues with {CTRLFx}. (Coded by N2IC)
Digital: Correct Issues of the window not resizing correctly at times. (Coded by N2AMG)
Digital: completely rewrites the InternalRXWindow code. See Message on Yahoo Groupfor details. (Coded by N2AMG)
Entry Window: made log of status bar messages shorter, removed date from timestamp, omitted blank lines (Coded by N1MM)
Radio: Experimental TS-990 radio control change only functional with one station callsign. (Coded by K3CT)
Available Window: Font dependent issue, the Summary table was partially blocked until a resize event occured. (N1EN)(Coded by K3CT) 3.63 MB 19 Sep 2014 495

Latest Update0.19.3873.exe
Function Key Editor: Fix right-click Cut/Copy/Paste function in editor (IW1AYD)(coded by K8UT)
Fixed start-up and contest change runtime error due to bad StartTime. (IS0BZR) (Coded by N2IC)
Stop next Dueling CQ if Pause key is pressed while sending to prevent possible ping-pong effect. (Coded by N2IC)
About: Adjusted to display properly at 100% and 150% screen resolution (N6XI) (Coded by N1MM)
Bandmap: fixed width of bandwidth indicator (VE1DT) (Coded by N1MM)
Bandmap: Shortened intermediate tick marks (Coded by N1MM)
Added capability to do a major version install automatically (KV4FZ) (Coded by N1MM) 3.63 MB 18 Sep 2014 376

Latest Update0.19.3863.exe
Fixed CWT scoring. (Many) (Coded by N2IC)
QSO logging performance: using caching for log dupe list (Coded by KU7T)
QSO logging performance: removing super partial check for logged call, not neccessary (Coded by KU7T)
Fixed runtime error when using ctrl-e and no computer to talk to. (PC5M) (Coded by N2IC) 3.62 MB 17 Sep 2014 514

Latest Update0.19.3858.exe
Entry window: Handle function key labels when shift & ctl and shift & alt are pressed (Coded by N1MM)
Bandmap: non-visible form load efficiency improvement (Coded by N1MM)
Digital: Corrected Type in Speed settings for TNC in MultiRX Window Setup 2800 is now 4800 (Coded by N2AMG)
Fixed start-up and contest change runtime error due to bad StartTime. (IS0BZR) (Coded by N2IC)
Digital: CQ Repeat was not functioning for DI2. (Coded by N2AMG)
Log: more fiddling with adding multi-op columns (N2IC) (Coded by N1MM)
Entry window: Networked Qs were not updating entry window score (K3IU) (Coded by N1MM) 3.62 MB 17 Sep 2014 191

Latest Update0.19.3849.exe
File writes: Adding retries to file writes to overcome second class of IOExceptions presumbably caused by some Antivirus products (LU7HZ, AB7R) (Coded by KU7T)
Digital: Removes annoying Dueling CQ is On message (Coded by N2AMG)
Digital: Corrects functioning of Dueling CQ when used in digital. (Coded by N2AMG)
Digital: {PROFILEx} macro's need to be first substitution in String. Adds check that if {PROFILEx} not found in first part of string to ignore it. (Coded by N2AMG)
Log: NetBiosName, run # and operator were not displaying reliably (K8IA) (Coded by N1MM)
EntryWindow: Clicking on the call in the call frame now emulates pressing the space bar like Classic did (W4DXX) (Coded by N1MM)
Debugging code for bad StartDate format. (IS0BZR) (Coded by N2IC)
Digital: Corrects SO2R Focus other not returning focus to the correct EW (Coded by N2AMG)
Entry window: reset recalcitrant tool tip control each time the mouse moves to improve display reliability (Coded by N1MM)
Diagnostics: Added tracing framework. Users can toggle normal, performance, sqlite performance and sqlite query analysis. Files added under user folder\Diagnostics (Coded by KU7T)
System Restore: Updated to latest code that may fix issues some users were seeing (G3RXQ) (Coded by KU7T)
Radio Control: Corrected several IC-7100 radio commands. (N1EN)(Coded by K3CT)
Digital: {SCQ} Timer was not cancelled if call was entered into call box after {SCQ} was sent (Codedby N2AMG) 3.64 MB 16 Sep 2014 532

Latest Update0.19.3837.exe
Reduce repaint in Entry Window & Telnet (Coded by N1MM)
Probable fix and more debugging code to catch IsRunQSO < 0. (Coded by N2IC)
Bug: Fixed the program startup problem, WinXp only issue. (LY5T)(Coded by K3CT)
Removed: ShowMessage of LogContact2 time. (Coded by N1MM)
Entry Window: Improved display of time since last qso tooltip, but tooltips are still unreliable in EW. (K2DSL) (Coded by N1MM)
Radio Control: Reversed the change made in version 0.19.3823 due to a reported issue. Will debug the original issue when time permits. (K9IMM)(Coded by K3CT)
ADIF Import: Could not import a QSO party ADIF generated with Logger+. (W5RZ)(Coded by K3CT)
Configurer Audio Tab: Made the device name boxes wider. (W9ZV)(Coded by K3CT)
WAE: Rescore was showing contacts changed when they were not changed (KG4W) (Coded by N1MM)
Telnet: Save Cluster when changed (DF1LX) (Coded by N1MM)
Entry Window: Shift was not toggling function key labels (K6MR) (Coded by N1MM) 3.63 MB 15 Sep 2014 681

Latest Update0.19.3823.exe
Logger+ Audio Player/Recorder: Added a user selectable Config option to access the new Logger+ audio player/recorder under development. It requires Windows Vista or newer. The option is disabled for Windows Xp. The new Logger+ Audio mixer controls and level meters require soundcard drivers with Windows CoreAudio support. The legacy audio player and recorder is still fully functional. To revert back to the legacy audio uncheck Config, Use Logger+ Audio. (Coded by K3CT)
Radio Control: When Dual Rx is enabled and the radio is in split the TX frequency is logged instead of the Rx frequency. This change was made for the FTDX-9000, FTDX-5000, FTDX-3000, FT-2000, FTDX-1200. (N3KS)(Coded by K3CT)
EntryWindow: Added suspend layout/resume layout & double buffering to LogContact2 to improve window painting (N3RD) (Coded by N1MM)
FOC BW QSO Party: Change the Score to be QSO's. Change the Multiplier column title to be FOC. (N6XI)(Coded by K3CT)
Added debugging code to catch IsRunQSO < 0. (Coded by N2IC)
Digital: Stops 2 copies of Fldigi from being loaded when typing PSK in EW (N1EN) (Coded by N2AMG)
Telnet: Added SuspendLayout/Resume Layout to form load for initial painting performance. (DF1LX) (Coded by N1MM) 3.62 MB 14 Sep 2014 758

Latest Update0.19.3812.exe
FOC BW QSO Party: Change multiplier scoring to represent the number of FOC QSO's per band. (W4TTM)(Coded by K3CT)
Networked computer mode: Fixed runtime error caused by invalid value in IsRunQSO (Left out of last build) (K8IA) (Coded by N1MM)
WAESSB: Stops keying the radio when saving and closign the QTC window. (Coded by N2AMG) 3.63 MB 13 Sep 2014 589

Latest Update0.19.3808.exe
Available Window: After logging a station that was grabbed from the window, pressing ALT+A or ALT+Shift+A will program the radio to the current selected spot because it has not been sent to the radio. (Coded by K3CT)
ADIF: Added export and import of "APP_N1MM_ISRUNQSO". (JG1VGX)(Coded by K3CT)
Made the date/time picker respond to Esc & return appropriately (N1EN) (Coded by N1MM)
Entry Window: Made tool tips display more reliably (many) (Coded by N1MM)
Entry Window: Added tool tips to a number of controls that were missing them (Coded by N1MM)
Macro editor: fixed name of local help file (K0TNT) (Coded by N1MM)
Added better debugging information when parameterized DB query fails. (K8IA) (Coded by N2IC)
Databases: Turning on the db upgrade "engine". Every database will be upgraded to the programs version if older. This is needed if we need to fine tune DB schema. (Coded by KU7T)
Networked computer mode: Fixed runtime error caused by invalid value in IsRunQSO (K8IA) (Coded by N1MM) 3.62 MB 13 Sep 2014 437

Latest Update0.19.3793.exe
More performance tweaks when logging a CW, Winkey QSO. (Coded by N2IC)
Database access: Reverted Sqlite to version 1.0.92.0 as we found major performance issues on read of first recordset (v93: 60ms vs v92: 2ms) (Coded by N1MM, KU7T)
Installer: new major version, in order to push the sqlite files that are not part of updater installer (Coded by KU7T) 3.61 MB 13 Sep 2014 729

Latest Update0.18.3790.exe
Added check for download file existence after download (W1RM) (Coded by N1MM)
Fixing Multiplier calculation caching bug (many) (Coded by KU7T)
Entry Window: When opening a VHF/UHF or WARC contest for the first time, display default Band Buttons for VHF or WARC. If the user changes the default band selection, the user's selection is saved and associated with that contest name. (Coded by K3CT)
Available Window: Changes to the spot grab operation (Alt+A / ALT+Shift+A). (Coded by K3CT)
Radio Control: Resync improvements and initialization changes for the following Yaesu radios: FT-840, FT-890, FT-900, FT-920, and FT-990. (Coded by K3CT)
Telnet issue: Fixed issue where telnet spots stopped processed after second Close() call by garbage collector/Finalizer set the dx log db to inactive (K3CT, N1MM) (Coded by KU7T)
Switching log db: Adding more throttling to background threads if dx log db is being switched (Coded by KU7T)
Fixed IsRunQSO flag in database. (JG1VGX) (Coded by N2IC) 3.62 MB 11 Sep 2014 474

Latest Update0.18.3779.exe
Performance improvements when QSO's are logged. (Coded by N2IC)
Made Grab focus on radio change more agressive (many) (Coded by N1MM)
Minor rotor changes for RT-21 and DCU. (W1RM) (Coded by N2IC)
Performance improvements to Log window rendering (Coded by KU7T, N1MM)
Performance improvements to Log window opening, now fetching rows only once (Coded by KU7T)
Performance improvements for Dupe table update (Coded by KU7T) 3.62 MB 10 Sep 2014 480

Latest Update0.18.3768.exe
Tweaks to sub band coloring (K3IU) (Coded by N1MM)
EntryWindow: Forced all text, including pasted text in callsign textbox to upper case (7Z1HL) (Coded by N1MM)
Performance: Improving time for adding new contact to Log grid (Coded by N1MM, KU7T)
TN QSO Party: Rules change to QSO points. (Coded by K3CT)
Edit Goals: Remove Import menu from the File menu. (N4ZR)(Coded by K3CT)
Entry Window Help: Corrected links to Bug Reports and Feature Requests ()WB2RHM) (coded by K8UT) 3.62 MB 09 Sep 2014 515

Latest Update0.18.3753.exe
Bandmap: eliminated outofband background color (DF1LX) (Coded by N1MM)
Rotor: Changed most message boxes to non-blocking status messages at the bottom of the rotor form. (WB2RHM) (Coded by N2IC)
Rotor: Added new rotor type: RT-21, for the Green Heron RT-21 controller. (Coded by N2IC)
Rotor: Fixed DCU and several Prosistel rotors. (WB2RHM) (Coded by N2IC)
Rotor: IMPORTANT NOTE FOR ALL ROTOR USERS: You may need to re-enter the correct rotor type in the Rotor Setup form.
Performance: Fixed cause of 550 msec delay when logging a second mult before the first mult's effect on local and telnetspots had been processed. (N2IC) (Coded by N1MM)
RUDXRTTY: Corrected Cabrillo received exchange format.(Several)(Coded by K3CT)
Infrastructure: Adding .NET diagnostics based tracer for logging and performance evaluation. Can be enabled in Release bits (Coded by KU7T)
Infrastructure: If NL+ is launched with tracing turned on, messages box warns about it (Coded by KU7T)
Audio Recording: Reduced the number of sound card sample rates for voice message recording. (Coded by K3CT) 3.61 MB 08 Sep 2014 531

Latest Update0.18.3738.exe
Made spot mode as comment persistent and defaulting to true. This is to improve overall telnet network spot quality by removing mode ambiguity from spots (Coded by N1MM)
Databases: Adding upgrade framework for all 3 databases so they can brought up-to-date with code (Coded KU7T)
Databases: Schema change for all 3 databases: Added Version table (Coded by KU7T)
Databases: Schema change for DXLogDb.ContestInstances.SoapBox: using TEXT to allow for larger data (Coded by KU7T)
Digital: Correct a focus issue that was causing the focus to switch to the digital engine when the mouse moved to certain places in the DI. (Coded by N2AMG)
Digital: Corrects RT error when switching from Entry window with \ or ctrl-Left/Right arrow. (Coded by N2AMG)
Bandmap: Added tooltips on freq labels to indicate their use for QSY & sub band assignment (Coded by N1MM)
Bandmap: Reduced flicker on initial display (Coded by N1MM)
Entry Window: Removed SSB sub band choice (W1TJL) (Coded by N1MM)
Telnet: Removed all sub band choices. Added a label to point users to band map. (Coded by N1MM)
Telnet: Added "SSB", "USB" & "LSB" as a modes recognized in telnet spot (Coded by N1MM) 3.62 MB 07 Sep 2014 510

Latest Update0.18.3725.exe
Eliminated some startup runtime errors on slower computers by insuring that certain functions are completed before events that need those functions are executed. (Coded by N2IC)
Removed Advanced SO2R. (Coded by N2IC)
Removed extra CFLF's when entering commands or automated logon id's (N3RD) (Coded by N1MM)
Rotor: Fixed RT error in NL+ rotor manager. (K1NYK) (Coded by N2IC)
Fixed RT error in ReadASCII. (N1ZX) (Coded by N2IC)
Bandmap: Added better indication of bandplan (still rough) (Coded by N1MM)
Bandmap: added right-click options on freq labels to set sub bands. Removed SSB subband editor from Telnet (Coded by N1MM) 3.62 MB 06 Sep 2014 553

Latest Update0.18.3712.exe
Edit Expected Multiplier: Fixed another error in edit lookup where a blank column caused a runtime error (N4ZR) (coded by N1MM)
Multiplier: Implemented code to set Rover location (W4TMO) (Coded by N1MM)
Fixed runtime error in MsgForm (K8UT) (Coded by N1MM)
Rotor: Fixed handling of DCU-1 with Green Heron controller. (W1RM) (Coded by N2IC)
FT-990: Added code to resync the radio when the response is incorrect. (N3BUO)(Coded by K3CT)
Switching DxLog db: Making sure all relevant background threads cease to process until DxLog db is back (PA5KT) (Coded by KU7T)
Digital: Corrects issue with Ctrl-K and DI2 (Coded by N2AMG)
Bandmap Changed background color of left half of window (Coded by N1MM) 3.62 MB 05 Sep 2014 476

Latest Update0.18.3698.exe
Networking UDP: Changed to (K8UT) (Coded by N1MM)
Check window: remvoving ReverseLookupWithLeadingWildCard feature. Wild cards are always automatically added before and after any string in rev call lookup (Coded by KU7T)
Rotor: Added diagnostic message written to LogError.txt when HandleRotorUDPMessage fails. (W1RM) (Coded by N2IC)
Rotor: AlfaSpid now works. (UA6LJB) (Coded by N2IC)
Backup Admin database when program starts. (W1RM) (Coded by N2IC)
Entry Window View Menu item form: fixed path'ing to local N1MMplus.pdf help file (WB2RHM)(coded by K8UT)
Digital: Corrects RT error "Object reference not set to an instance of an object" When MMVARI and Fldigi were loaded with no radio on startup. (N2AMG)
Updater installer: Restarting exe on the installer's Finish page (launching exe un-elevated!) (K0RC, K3IU, PC5M, N1EN) (Coded by KU7T)
Updater installer: Passing cmd line args from exe to installer and back to exe, allowing correct use of /INI or /USERDIR before upgrade and after (N1EN) (Coded by KU7T)
New version update: added non-intrusive message box to display download progress. Needs polishing (many) (Coded by N1MM)
Edit Expected Multiplier: Fixed error in edit lookup where a blank column caused a runtime error (N4ZR) (coded by N1MM) 3.62 MB 04 Sep 2014 531

Latest Update0.18.3680.exe
Log selection dialog: convert operator call to upper case (SM3CER) (Coded by N1MM)
Entry Window View Menu item form and FunctionKey Editor form: fixes to drop-down menus (WB2RHM)(coded by K8UT)
EditLookupTable: Fixed regression where long data strings were cut off (W1RM, KG5VK) (Coded by KU7T)
EditLookupTable: Fixed regression column order was reversed (N1MM) (Coded by KU7T)
Reverse Call lookup: Changed sorting to use the same order as the other panes, as defined by settings. First by difference to typed call, then alphnumerically (W1RM) (Coded by KU7T)
Telnet: if no mode is specified, allow all modes (K3CT) (Coded by N1MM)
CQWW: Country mults in spots were not being cleared upon working that country. (K3CT) (Coded by N1MM) 3.60 MB 03 Sep 2014 518

Latest Update0.18.3671.exe
Rotor: Changed UDP message from N1MMRotor to NL+ to be the heading multiplied by 10, sent as an integer. (YO3DMU) (Coded by N2IC)
Rotor: When no rotor is specified in the Antennas tab, an Alt-J command to N1MMRotor will cause the rotor selected in N1MMRotor Tools to be activated. (WD4AHZ) (Coded by N2IC)
New Database: Fixed problem when Cancel is selected. (K2DSL) (Coded by N2IC)
Change Reversed: The change in version 0.18.3657 to eliminate a runtime when a function key contained a "&" character interacted with the VaryMsg macro. (Coded by K3CT)
Entry Window: The word "Bearing" is not understood as well as "Heading". Changed the Entry window wording. (DF1LX)(Coded by K3CT)
Added OS information to error logging (Coded by KU7T)
Allow lower case in comment and name fields in dx contests (VE1DT) (Coded by N1MM)
Runs report was reporting time in 12 hour format (VE1DT) (Coded by N1MM)
FT-890: Resyncing changes for the FT-890 radio. Changes are not expected to disturb any other Yaesu radio. (S51J)(Coded by K3CT)
Removed all remaining 12 hour format statements in program (K3CT) (Coded by N1MM) 3.60 MB 02 Sep 2014 375

Latest Update0.18.3657.exe
Full contact editor: Updated country when callsign changes. (VE1DT) (Coded by N1MM)
Log: left justified Points so it would look better as the last column (Coded by N1MM)
Rotor: Fixed help link (WB2RHM) (Coded by N1MM)
Rotor: Changed UDP message from N1MMRotor to NL+ to include 1 decimal point (i.e. 70.0) instead of integer (70). (YO9DMU) (Coded by N2IC)
Available Window: Eliminate a runtime error when trying to delete a spot when the window doesn't contain any spots. (G4MKR)(Coded by K3CT)
EDI Export: The month in the TDATE field is missing. (9A2VX)(Coded by K3CT)
Visible Dupesheet: Fixed caption for 160 meters. (W4OC) (Coded by N2IC)
Log: FillsFreeSpace attribute was being left on columns when switching contests, causing inability to resize affected column (K3CT) (Coded by N1MM)
Winkey: Added diagnostic code to trap disappearing Winkey ports. (VE2FK) (Coded by N2IC)
Summary Export: Do not include "Assisted Category" for contests using Cabrillo 2.0. It is not a valid Cabrillo field. (K2DSL)(Coded by K3ct)
File path management: Fixed bug where different casing in user directory failed call history file association (W9ZV) (KU7T)
Create new database was creating a bad entry in the file list (Coded by N1MM)
Create new database wasn't catching files attempting to be created outside of databases folder (Coded by N1MM)
FT-890: Additional debugging changes for S51J. (Coded by K3CT)
FT-840, FT-900: Corrected a bug added in version 18.3643 which prevented these radios from polling correctly. (Coded by K3CT)
RunTime: CW messages containing "&" caused a runtime error.(DF1LX)(Coded by K3CT) 3.60 MB 01 Sep 2014 445

Latest Update0.18.3643.exe
Defaults Error: Fix for Missing Defaults error. (Coded by K3CT)
Rotor: (maybe) improvements for ERC controller. (N4ZR) (Coded by N2IC)
Visible Dupesheet: Automatically adjust width of call area boxes to size of font (VE3KI, KZ5D) (Coded by N2IC)
Refined AM & FM from mode control checks in title bar (W3IUU)
Bandmap: Ctl-Alt-up/down were broken at band edges (VE1DT) (Coded by N1MM)
FT-890: Added additional debuging code and a change. The radio times out, nothing received from the radio. (S51J)(Coded by K3CT)
SCCRTTY: Populate the exchange from the log before the call history lookup. (Coded by K3CT)
AZ QSO Party: Bonus station callsign change. (Coded by K3CT)
Log: added check for errors while editing contact (Coded by N1MM)
SCC: Changing year in grids was not chaninge section in log (WB2RHM, K2DSL) (Coded by N1MM)
Multiplier: Changing a contact was not updating the mults (WB2RHM, K2DSL) (Coded by N1MM) 3.60 MB 31 Aug 2014 471

Latest Update0.18.3627.exe
Telnet: Made mousewheel work (Coded by N1MM)
Audio: Changes to the unreleased audio player/recorder. (Coded by K3CT)
Editing bandplans: Fixing Exception (K3IU) (Coded by KU7T)
Fix null exception when closing rotor form. (DC3RJ) (Coded by N2IC)
Contest deletion: Fixed so that next time NL+ is opened it will not open the previously deleted contest. (VE1DT) (Coded by N2IC)
Visible Dupesheet: AFSK and PSK modes are now handled. (AK7S) (Coded by N2IC)
Full Installer: Eliminated need for VSCRT2012, dropping private dlls instead, full installer now 9MB and avoiding "DLL hell" (Coded by KU7T)
Full Installer: Made sure log files are written to actually choosen app folder not the default one (W9ZV) (Coded by KU7T)
Visible Dupesheet: Parameterized sql query to eliminate special character bugs (Coded by KU7T)
Refinements to non-intrusive message box positioning (K3CT) (Coded by N1MM) 3.60 MB 30 Aug 2014 498

Latest Update 0.18.3612.exe
Made it possible to zoom either bandmap whether focus is set to that radio or not. (M5RIC) (Coded by N1MM)
Multiplier: Made use NIMB (Coded by N1MM)
Spot with comment was still spotting if cancel was pressed. (AA1AR) (Coded by N1MM)
Entry Window: Removed copy & compact database from view (VE1DT) (Coded by N1MM)
FT-847: Corrected a radio code error. (Coded by K3CT)
Audio: Changes to the unreleased audio player/recorder. (Coded by K3CT)
AdminDb.LookupTable: Created data access class that uses SqliteParameters and routing all calls through it. Fixes few special character bugs (KB7Q) (Coded by KU7T)
Edit Telnet Buttons & Nodes: defaulted dir to FunctionKeyMessages. Fixed import/export problem with buttons (VE3KI) (Coded by N1MM)
Changed window visibility enforcement from small square in upper left needing to be on-screen to requiring any part of title bar to be on a screen (W1UE) (Coded by N1MM)
Call History: Bug, eliminated a runtime when updating call history from a log containing gridsquare exchanges. (9A2VX)(Coded by K3CT) 3.60 MB 29 Aug 2014 494

Latest Update 0.18.3594.exe
Rotor: Display all direction indicators when multiple antenna codes and rotors are assigned to the same band. (KU1T) (Coded by N2IC)
File path management: Fixed bug where different casing in user directory failed a few file operations (W9ZV) (KU7T)
Telnet: improved shutdown process (DF1LX) (Coded by N1MM)
Telnet: started to add non-intrusive message boxes (Coded by N1MM)
Automated update: saved the right nag version and made sure new version } current version. (Coded by N1MM)
Added database name to runtime error dialog when SQLString is shown (Coded by N1MM)
Minor changes to non-intrusive message box (Coded by N1MM) 3.62 MB 28 Aug 2014 383

Latest Update 0.18.3586.exe
UDC: NumMults was always 1 (default) - fixed (G4OGB). (Coded by NA3M)
Error Logging: Added the details of any inner exception to HandleError/LogError logging to help troubleshooting (G3RXQ) (Coded by KU7T)
Entry Window: Fixed runtime error/exit with QRZ button pressed when no call to find (XE3/K5ENS) (Coded by N1MM)
Fixed {CONDJUMP}, a rarely-used SO2R macro. (Coded by N2IC)
Bandmap: added a prototype non-intrusive message box to show an error result from find spot. This implementation of the control will
stay around for 10 seconds unless the user clicks on the pane. Then the user must press X to hide the message. The plan
is to refine this control and then use in cases where a simple message in the status bar is insufficient to get the user's attention,
but when a modal dialog box is too intrusive. A good place for this type of control is telling the user that the contact is
not loggable for some reason. The box will support buttons as well. (Coded by N1MM)
Running as non-admin: Removed code that attempted to write files to app folder. Files are already placed there by installer (K1TTT) (Coded by KU7T)
Improved reliability for download & install (many) (Coded by N1MM)
Fixed issue where large Soapbox strings in DXLog.ContestInstance table would cause ConstraintException. Changed column type to TEXT (VE1DT) (Coded by KU7T) 3.59 MB 27 Aug 2014 535

Latest Update 0.18.3571.exe
Telnet: made right click jump to spot send spot to the focus radio (K3CT) (Coded by N1MM)
CQWW RTTY: If call history contains AK or HI states, do not populate the State box. (W1UE) (Coded by K3CT)
Runtime: Eliminated a startup runtime. (K5WW) (Coded by K3CT)
Full Installer: Creating a system restore point automatically on install (Coded by KU7T)
Full Installer: Using statically linked Sqlite.Interop.dll, eliminating need for VSCRT2010SP1 (Coded by KU7T)
Full Installer: Moved all log folders of external installers in a sub directory to reduce clutter in app folder (Coded by KU7T)
Entry Window: made QRZ button use Call, Callframe call, or last call for search (PA5CW) (Coded by N1MM)
Configurer: added checkbox: "Check for new program versions". Defaults to checked. (N2IC) (Coded by N1MM)
Radio UDP Broadcast: Focus window handle was missing (W2RF) (Coded by N1MM) 3.59 MB 26 Aug 2014 1179

Latest Update 0.18.3560.exe
Bandmap: Find spot was broken (N4ZR) (Coded by N1MM)
Entry Window: Check for new version was reporting a new version (ON5ZO) (Coded by N1MM)
Telnet: Changed diagnostic code for bad spots (k8SIA) (Coded by N1MM)
Manage Skins, Colors and Fonts: Fixed bug in Show FontSizer save (VE1DT)(coded by K8UT)
Telnet Window: Added check for FontSizer setting upon form load (coded by K8UT)
Spot parsing: If app fails to parse packet spot, writing packet string to errorlog to help investigations (Coded by KU7T)
Telnet: fixed runtime error when response to a command starts with DX (K8SIA) (Coded by N1MM)
Full Installer: Install Wingdings 3 True type font if not already installed. Needed for EntryWindow CQ repeat symbol (Coded by KU7T)
Full Installer: Keep the external prerequisite installers, as they may help during troubleshooting (Coded by KU7T)
Full Installer: If external prerequisite installer failed (pending restart or other causes), make sure NL+ installer quits (Coded by KU7T)
Automatic detection of new version implemented at startup. Nags once for each new version. (Coded by N1MM) 3.60 MB 25 Aug 2014 326

Latest Update 0.18.3550.exe
Bug: Fixed the no radio startup issue in 0.18.3537. (Coded by K3CT)
DigitalRX Window: MMTTY on Top checkbox was causing an issue and not saving correctly. (Coded by N2AMG)
Telnet: Added Import function to Filter tab for adding a list of blacklisted calls. (Coded by N2IC)
Log: Removed "ghost" label from window (K3PA) (Coded by N1MM)
Entry: Added more modes to those checked for title bar mismatch message (Coded by N1MM)
Font sizer code was losing font attributes (many) (Coded by N1MM)
Improved Check for new version code. Now downloads, runs and starts close of entry window. More to come (Coded by N1MM)
Telnet: added diagnostic code for runtime error (K3IU) (Coded by N1MM) 3.59 MB 25 Aug 2014 358

Latest Update 0.18.3537.exe
FT890: Debug code change. (Coded by K3CT)
Added error message to right-click on function keys if mode is not set (many) (Coded by N1MM)
Rotor: Fixed azimuth window in rotor form to show the last selected rotor position. (K3IU) (Coded by N2IC)
Close program if user chooses to install new version (Coded by N1MM)
Radio Control: Bug. Reversed the mode before frequency change made in version 0.18.3501 for all radios except the TS-990 and IC-7600. If there are other radios that require mode before frequency they can be added. To test with a Bandmap spot click, the Config, Mode Control option needs to be set to "Follow Band Plan" or "Use Contest Mode or Band Plan". The mode control functionality has not changed in 0.18.3501 or in this version and is expected to be identical to the legacy program. (Coded by K3CT)
Radio Control: Reversed the mode and frequency commands in several other routines for the radios requiring this order. (Coded by K3CT)
Log: Chenged method of showing font sizer (N4ZR) (Coded by N1MM)
WIPELOG: Multiplier window is now cleared. (K3TN) (Coded by N2IC)
Add better error message when COM port is missing. (MI0BPB) (Coded by N2IC)
Section Mult Window: Wasn't always displaying mults when show only worked mults was chosen (N2IC) (Coded by N1MM)
Telnet modes reset after closing N1MM (M5RIC) (Coded by N1MM)
FT890: Added debug code. (S51J) (Coded by K3CT) 3.60 MB 24 Aug 2014 265

Latest Update 0.18.3519.exe
Audio Player: Added read file permission check for playback and write permission check for recording in the unreleased audio player. (Coded by K3CT)
CQWW: Highlight zone field when using Space bar. (XE3/K5ENS) (Coded by N2IC)
Network Status: Added Stop Networking right-menu option (N4ZR) (Coded by N1MM)
Restored Grab focus function, but made it an option in the Config drop down menu. Default is OFF (many) (Coded by N1MM)
Rotor improvements. (K3IU) (Coded by N2IC)
Internationalize handling of comm events (SV1RHL) (Coded by N1MM)
Function Key Editor: Various changes, including scroll on FormResize (9A3OS)(coded by K8UT)
Telnet: Made unchecked AutoLogon selection prevent connecting as well as logon. Press Reconnect button to connect at startup. (N3ND, KG5VX) (Coded by N1MM)
Rescore was marking all QSOs changed (KG4W) (Coded by N1MM)
WAE: Partially fixed Statistics display problem with mult1 (DF1LX) (Coded by N1MM)
3.60 MB 24 Aug 2014 283

Latest Update 0.18.3501.exe
Radio Control: When programming the radio, change the mode first. (K9IMM) (Coded by K3CT)
Digital: Internal RX window 4 was not coloring with the correct background color. (Coded by N2AMG)
Telnet: Added autoscroll to Spot Comment tab (K0RC 37) (Coded by N1MM)
Signed N1MMLogger.Net and N1MMRotor.Net (Coded by N1MM)
Function Key Editor: Enabled right-click WAV filename insertion (K8IA)(coded by K8UT)
Function Key Editor: Fixed SaveButton enabled on FormResize bug (9A3OS)(coded by K8UT)
Telnet: added option to show/not show buttons (DF1LX) (Coded by N1MM)
Entry Window: when contact mode contest mode, show in title bar (Coded by N1MM)
RunTime: Added text to the ErrorLog file when the OS Version check produces a runtime. (K9XZ)(Coded by K3CT) 3.60 MB 23 Aug 2014 427

Last Modification: 12 February 2017 04:41:20 EST by K8UT.